电法在濒海及岛屿地区寻找地下淡水中的应用

采用电法的基本原理，研究各种不同岩性和成淡水的电性差畀，划分地下成淡水分界面。在严重缺水的濒海及岛屿地区找到了较好的地下淡水，解决了守岛部队吃水难的问题。     

Measuring the k–S–p relations on DNAPLs migration

Migration characteristics of dense non-aqueous phase liquids (DNAPLs) in the subsurface can be expressed as a water–DNAPL two-phase system based on mainly the k–S–p relations, which describe the relations among relative permeability (k), degree of water saturation (S), and capillary pressure head (p). The aims of this research are to develop an experimental system with new type of probes, such as the electrical conductivity probe for measuring the degree of water saturation and the hydrophilic and hydrophobic tensiometer for measuring the pore water and DNAPL pressures, and also to estimate the results obtained from the developed experimental system. From these tests, the excellent k–S–p relations were obtained and the efficiency and validity of this developed experimental system have been confirmed in terms of the concept of the scaling coefficient calculated by interfacial tensions.     

用于多频电磁波测井的圆锥螺旋式有源接收天线

对用负阻抗变换电路同圆锥螺旋天线相结合，构成的有源接收天线进行了理论分析。并给出了该有源天线稳定工作的条件和设计原理。结果表明，用该方法设计的有源接收天线具有很宽的频带、较高的灵敏度和很小的尺寸，是多频电磁波测井较为理想的接收天线。     

一种分析砂岩沉积相的新方法——测井相分析

本文分析了以地层倾角测井资料为核心的各种测井相标志，提出了应用测井资料进行沉积相分析的方法和步骤，并在塔里木盆地三个油田进行了测井地质相分析。     

古潜山火成岩裂缝带划分与孔隙度计算

针对火成岩岩性成分复杂，常规测井难以正确划分岩性，严重阻碍了储层参数的定量计算。本文提出模糊聚类划分岩性，采用综合概率法与混合体积模型计算裂缝孔隙度、有效孔隙度等参数。其测井解释结果与井壁取心和地质描述资料对照，完全吻合。     

吉林省地质灾害类型及防治对策探讨

本文针对吉林省的地质灾害类型及各类地质灾害的成因，分布及其危害进行了论述。对其防治对策进行了探讨，提出了切合本省实际的五项防治措施。     

Space-time mapping of soil salinity using probabilistic bayesian maximum entropy

The mapping of saline soils is the first task before any reclamation effort. Reclamation is based on the knowledge of soil salinity in space and how it evolves with time. Soil salinity is traditionally determined by soil sampling and laboratory analysis. Recently, it became possible to complement these hard data with soft secondary data made available using field sensors like electrode probes. In this study, we had two data sets. The first includes measurements of field salinity (EC_a) at 413 locations and 19 time instants. The second, which is a subset of the first (13 to 20 locations), contains, in addition to EC_a, salinity determined in the laboratory (EC_2.5). Based on a procedure of cross-validation, we compared the prediction performance in the space-time domain of 3 methods: kriging using either only hard data (HK) or hard and mid interval soft data (HMIK), and Bayesian maximum entropy (BME) using probabilistic soft data. We found that BME was less biased, more accurate and giving estimates, which were better correlated with the observed values than the two kriging techniques. In addition, BME allowed one to delineate with better detail saline from non-saline areas.     

基于MAPGIS的钻孔柱状图绘制软件的编制

绘制钻孔地质柱状图是地质工作中的一项重要工作。在计算机没有普及时，主要是通过手工绘制完成的。随着计算机在地质学中的广泛应用，地质工作者就如何利用计算机高效快速地绘制钻孔地质柱状图进行了很多尝试，如使用一些商业绘图软件或编制了一些软件，但往往不尽人意。基于MAPGIS开发一个钻孔柱状图绘制软件，可以方便地读取数据库中的数据进行柱状图绘制，生成图形为MAPGIS文件格式，可以在MAPIS中修改及打印。这里介绍了MAPGIS二次开发平台，并阐述了软件系统设计思路和关键技术的实现方法。     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.