黄河大柳树坝基岩体地震破坏后的密度特征

本文通过对岩体地震破坏后的弹性波测试，分析其波速的制约因素，采取相应的计算公式讨论了岩体密度的计算方法，并将其与平硐内壁裂隙统计计算出的岩体密度值做了比较，说明应用弹性波速计算岩体密度的精度与科学性。     

大同地震序列的震源机制解

使用ＣＤＳＮ长周期地震波形记录，利用Ｈｅｌｍｂｅｒｇｅｒ（１９６８）的广义地震射线理论得到的线性反演地震矩张量的方法，对１９８９年１０月１８日－１９９１年３月２５日发生在大同的４个Ｍｓ＞５．０的地震进行了反演，计算了这些地震矩张量和断层面解。     

滇西地震的短临综合预报决策研究

本文在短临预报指标研究的基础上，综合考虑各指标在综合预报中的作用，并用层次分析法计算出了参与滇西地震综合预测的各指标的综合权重值，最后进行系统合成，从而对滇西地区的地震的发震时间、地点进行定量化的预测，而对强度预测，而在发震时间预测的前提下，综合考虑指标异常出现的项次及持继时间长短（孕报期的长短），来综合判定预测强度。所得结果，通过１９７５年以来滇西地区２３次Ｍｓ≥５．０级地震检验，时间预测对应率     

Three-dimensional elastic wave scattering and diffraction due to a rigid cylinder embedded in an elastic medium by a point source

The formal solutions of displacement field to the problem of elastic wave scattering and diffraction due to an infinitely long rigid cylinder embedded in an infinite elastic medium by an impulsive point source have been obtained in the integral form. The integrals for the reflected and the diffracted waves both in the shadow zone and in the illuminated zone are evaluated asymptotically for the early time motion by the Reisdue-Cagniard method and the Saddle-point-Cagniard method.Numerical results of the diffractedP, S andPS waves at a fixed circum-distance from the surface of the rigid cylinder show noticeably that (1) the energy partition for the diffractedS wave is small in comparison with that for the diffractedP wave, (2) the wave form of the diffractedS wave is broader and more diffused than that of the diffractedP wave, (3) the direction of the radial motions of the diffractedP andS waves varies as a function of the observational point, and (4) the energy partition for the diffractedP wave is much smaller than that for the direct or the reflectedP waves.This paper has been presented at the 46th Annual International Meeting of Society of Exploration Geophysicists in Houston, Texas, Oct. 28, 1976.     

Source Parameters of the Deadly M<Subscript>w</Subscript> 7.6 Kashmir Earthquake of 8 October, 2005

During the last six years, National Geophysical Research Institute, Hyderabad has established a semi-permanent seismological network of 5–8 broadband seismographs and 10–20 accelerographs in the Kachchh seismic zone, Gujarat with a prime objective to monitor the continued aftershock activity of the 2001 M_w 7.7 Bhuj mainshock. The reliable and accurate broadband data for the 8 October M_w 7.6 2005 Kashmir earthquake and its aftershocks from this network as well as Hyderabad Geoscope station enabled us to estimate the group velocity dispersion characteristics and one-dimensional regional shear velocity structure of the Peninsular India. Firstly, we measure Rayleigh-and Love-wave group velocity dispersion curves in the period range of 8 to 35 sec and invert these curves to estimate the crustal and upper mantle structure below the western part of Peninsular India. Our best model suggests a two-layered crust: The upper crust is 13.8 km thick with a shear velocity (Vs) of 3.2 km/s; the corresponding values for the lower crust are 24.9 km and 3.7 km/sec. The shear velocity for the upper mantle is found to be 4.65 km/sec. Based on this structure, we perform a moment tensor (MT) inversion of the bandpass (0.05–0.02 Hz) filtered seismograms of the Kashmir earthquake. The best fit is obtained for a source located at a depth of 30 km, with a seismic moment, Mo, of 1.6 × 10²⁷ dyne-cm, and a focal mechanism with strike 19.5°, dip 42°, and rake 167°. The long-period magnitude (M_A ~ M_w) of this earthquake is estimated to be 7.31. An analysis of well-developed sPn and sSn regional crustal phases from the bandpassed (0.02–0.25 Hz) seismograms of this earthquake at four stations in Kachchh suggests a focal depth of 30.8 km.     

Prediction of surface horizontal displacements, and gravity and tilt changes caused by filling the Three Gorges Reservoir

 Horizontal displacements, and gravity and tilt changes induced by filling the Three Gorges Reservoir are modeled using elastic loading Green functions. When the water surface reaches its highest level, the effects become maximum on the reservoir banks. The longitudinal and latitudinal components of the horizontal displacements reach −8.2 and 7.7 mm respectively, gravity is increased by up to 3.4 mGal, and the prime vertical and meridian components of the tilt changes are −7.8 and −17.5 arcseconds respectively. Accordingly, the filling of the reservoir will influence values observed from global positioning system (GPS), gravimetry and tilt measurements in the area. The results given can be used to provide important corrections for extracting earthquake-related signals from observed data. Received: 19 January 2001 / Accepted: 3 September 2001     

沉积岩的一种各向异性模型

给出了沉积岩的一种各向异性模型。用一个各向异性参数描述这类材料的固有各向异性，各向异性参数和单轴抗压强度是一个分布函数，其分布用一个微结构张量和加载方向表示。建立了一个描述各向异性沉积岩变形过程的全塑性模型。用该模型对这一些三轴试验进行了模拟，结果表明该模型能有效地描述沉积岩的固有各向异性。     

Scattering of seismic waves by cracks in multi-layered geological regions: II. Numerical results

The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field.     

Rotation and dilation deformation mechanisms for auxetic behaviour in the α-cristobalite tetrahedral framework structure

 Analytical expressions are derived for the Poisson's ratios associated with a three-dimensional network of regular, corner-sharing tetrahedra in which: (1) the tetrahedra are assumed to be rigid and free to rotate relative to each other; (2) the tetrahedra are assumed to maintain shape and orientation but are free to change size (dilate); (3) tetrahedral rotation and dilation are assumed to act concurrently. The structure has a primitive unit cell containing four tetrahedra and is analogous to the molecular structure of α-cristobalite. Strain-dependent variations in Poisson's ratio are also predicted by the models. For deformation due to tetrahedral rotation the network is found to exhibit negative Poisson's ratios in each of the three principal directions, with the magnitude of the Poisson's ratio being dependent on the angle of rotation of the tetrahedra. The behaviour of the Poisson's ratio is isotropic in the transverse plane, but anisotropic elsewhere. In the dilation model negative Poisson's ratios equal to −1 are observed for uniaxial loading in any of the principal directions, with the value being constant irrespective of tetrahedral size. The model for concurrent tetrahedral rotation and dilation allows positive as well as negative Poisson's ratios, with the values determined by the framework geometry and relative strengths of the two mechanisms. The concurrent model also offers a design route to materials and structures having ultrahigh Young's moduli. Received: 15 February 2000 / Accepted: 1 October 2000