Variable complexity of the US Continental Divide trace

Abstract

Map-view complexity of 65 contiguous segments of the conterminous US Continental Divide trace was evaluated by the divider method, with each segment’s geometry approximated by a fractal dimension (D) value, or two D values applying to fine and coarse scales of inspection. Results support a generalization that D values in the range 1.05–1.12 are typical for drainage divides viewed at regional to national scales. However about 20% of cases reviewed in this study are smoother (D = 1.01–1.04) or more complex (D = 1.13–1.18) traces. Complexities of these watershed boundary segments show no significant correlation with physiographic province or local relief. The primary influence of bedrock lithology and surface process is seen in zones of Quaternary volcanism, where uncommonly smooth and highly complex divide trace segments are more the rule than exception. Uncommonly smooth divide traces are also found descending mountain pediments in areas of parallel drainage, and some of the most tortuous traces are associated with drainage patterns disrupted by non-fluvial processes. Divide trace segments crossing terrain with uniform lithology show decreased complexity, but traces with the broadest range of complexity, including highest D values, occur in areas with moderate, not extreme, degrees of bedrock diversity.     

The Darfur Dome,western Sudan: the product of a subcontinental mantle plume

Field investigations, K-Ar age determinations and chemical data were used to describe the development of an intraplate volcanic province, the Darfur Dome, Sudan. Magmatism started 36 Ma ago at a small subvolcanic complex (Jebel Kussa) in the center of the dome and was active in the same area between 26 and 23 Ma. Two major volcanic fields (Marra Mountains and Tagabo Hills) developed between 16 and 10 Ma. Volcanism started again at 6.8 Ma with a third volcanic field (Meidob Hills) and at 4.3 Ma in the Marra Mountains and with the reactivation of the center. Activity then continued until the late Quaternary. Having started in the center of the Darfur Dome, volcanism moved in 36 Ma 200 km towards the NNE and 100 km SSW No essential difference in the alkaline magma types (basanitic to phonolitic-trachytic, with different amounts of assimilation of crustal material) in the different fields, was observed. Magmatism is thought to have been produced by a rising mantle plume and volcanism was triggered by stress resolution along the Central African Fault Zone.     

Archean greenstone-tonalite duality: Thermochemical mantle convection models or plate tectonics in the early Earth global dynamics?

Mantle convection and plate tectonics are one system, because oceanic plates are cold upper thermal boundary layers of the convection cells. As a corollary, Phanerozoic-style of plate tectonics or more likely a different version of it (i.e. a larger number of slowly moving plates, or similar number of faster plates) is expected to have operated in the hotter, vigorously convecting early Earth. Despite the recent advances in understanding the origin of Archean greenstone–granitoid terranes, the question regarding the operation of plate tectonics in the early Earth remains still controversial. Numerical model outputs for the Archean Earth range from predominantly shallow to flat subduction between 4.0 and 2.5 Ga and well-established steep subduction since 2.5 Ga [Abbott, D., Drury, R., Smith, W.H.F., 1994. Flat to steep transition in subduction style. Geology 22, 937–940], to no plate tectonics but rather foundering of 1000 km sectors of basaltic crust, then “resurfaced” by upper asthenospheric mantle basaltic melts that generate the observed duality of basalts and tonalities [van Thienen, P., van den Berg, A.P., Vlaar, N.J., 2004a. Production and recycling of oceanic crust in the early earth. Tectonophysics 386, 41–65; van Thienen, P., Van den Berg, A.P., Vlaar, N.J., 2004b. On the formation of continental silicic melts in thermochemical mantle convection models: implications for early Earth. Tectonophysics 394, 111–124]. These model outputs can be tested against the geological record. Greenstone belt volcanics are composites of komatiite–basalt plateau sequences erupted from deep mantle plumes and bimodal basalt–dacite sequences having the geochemical signatures of convergent margins; i.e. horizontally imbricated plateau and island arc crust. Greenstone belts from 3.8 to 2.5 Ga include volcanic types reported from Cenozoic convergent margins including: boninites; arc picrites; and the association of adakites–Mg andesites- and Nb-enriched basalts.Archean cratons were intruded by voluminous norites from the Neoarchean through Proterozoic; norites are accounted for by melting of subduction metasomatized Archean continental lithospheric mantle (CLM). Deep CLM defines Archean cratons; it extends to  350 km, includes the diamond facies, and xenoliths signify a composition of the buoyant, refractory, residue of plume melting, a natural consequence of imbricated plateau-arc crust. Voluminous tonalites of Archean greenstone–granitoid terranes show a secular trend of increasing Mg#, Cr, Ni consistent with slab melts hybridizing with thicker mantle wedge as subduction angle steepens. Strike-slip faults of 1000 km scale; diachronous accretion of distinct tectonostratigraphic terranes; and broad Cordilleran-type orogens featuring multiple sutures, and oceanward migration of arcs, in the Archean Superior and Yilgarn cratons, are in common with the Altaid and Phanerozoic Cordilleran orogens. There is increasing geological evidence of the supercontinent cycle operating back to  2.7 Ga: Kenorland or Ur  2.7–2.4 Ga; Columbia  1.6–1.4 Ga; Rodinia  1100–750 Ma; and Pangea  230 Ma. High-resolution seismic reflection profiling of Archean terranes reveals a prevalence of low angle structures, and evidence for paleo-subduction zones. Collectively, the geological–geochemical–seismic records endorse the operation of plate tectonics since the early Archean.     

3D shear-wave velocity structure of the Eifel plume, Germany

The Quaternary Eifel volcanic fields, situated on the Rhenish Massif in Germany, are the focus of a major interdisciplinary project. The aim is a detailed study of the crustal and mantle structure of the intraplate volcanic fields and their deep origin. Recent results from a teleseismic P-wave tomography study reveal a deep low-velocity structure which we infer to be a plume in the upper mantle underneath the volcanic area [J.R.R. Ritter et al., Earth Planet. Sci. Lett. 186 (2001) 7-14]. Here we present a travel-time investigation of 5038 teleseismic shear-wave arrivals in the same region. First, the transverse (T) and radial (R) component travel-time residuals are treated separately to identify possible effects of seismic anisotropy. A comparison of 2044 T- and 2994 R-component residuals demonstrates that anisotropy does not cause any first-order travel-time effects. The data sets reveal a deep-seated low-velocity anomaly beneath the volcanic region, causing a delay for teleseismic shear waves of about 3 s. Using 3773 combined R- and T-component residuals, an isotropic non-linear inversion is calculated. The tomographic images reveal a prominent S-wave velocity reduction in the upper mantle underneath the Eifel region. The anomaly extends down to at least 400 km depth. The velocity contrast to the surrounding mantle is depth-dependent (from −5% at 31-100 km depth to at least −1% at 400 km depth). At about 170-240 km depth the anomaly is nearly absent. The resolution of the data is sufficient to recover the described features, however the anomaly in the lower asthenosphere is underestimated due to smearing and damping. The main anomaly is similar to the P-wave model except the latter lacks the ‘hole’ near 200 km depth, and both are consistent with an upper mantle plume structure. For plausible anhydrous plume material in the uppermost 100 km of the mantle, an excess temperature as great as 200-300 K is estimated from the seismic anomaly. However, 1% partial melt reduces the required temperature anomaly to about 100 K. The temperature anomaly associated with the deeper part of the plume (250 to about 450 km depth) is at least 70 K. However, this estimate is quite uncertain, because the amplitude of the shear-wave anomaly may be larger than the modelled one. Another possibility is water in the upwelling material. The gap at 170-240 km depth could arise from an increase of the shear modulus caused by dehydration processes which would not affect P-wave velocities as much. An interaction of temperature and compositional variations, including melt and possibly water, makes it difficult to differentiate quantitatively between the causes of the deep-seated low-velocity anomaly.     

早元古代滹沱群玄武岩Rb-Sr、Sm-Nd同位素体系初论

本文给出的滹沱群下亚群青石村组玄武岩Ｒｂ－Ｓｒ、Ｓｍ－Ｎｄ全岩等时线年龄为２０４５．８±１７和２３６９±３０Ｍａ（Ｚ），角门石４０Ａｒ－３９Ａｒ坪年龄和最高视年龄为１３６４±１９和１９３２±１９Ｍａ（１）；中亚群河边村组玄武岩Ｒｂ－Ｓｒ全岩等时线年龄图的投点呈完全离散状，Ｓｍ－Ｎｄ全岩等时线年龄为２３２２±３１Ｍａ（２），角门石４０Ａｒ－３９Ａｒ坪年龄和最高视年龄为１３６０和１７４２±１７Ｍａ（１）。根据上述Ｒｂ－Ｓｒ、Ｓｍ－Ｎｄ数据与已知青石村组、河边村组单颗粒锆石Ｕ－Ｐｂ法确定的成岩年龄２４５０±１０和２４００±２０Ｍａ（２）的明显差别，４０Ａｒ－３９Ａｒ均揭示为较典型受扰动的年龄谱和较发育的透人性构造、晚期岩脉等地质证据，认为Ｒｂ－Ｓｒ、Ｓｍ－Ｎｄ是重设的同位素体系。     

黑龙江镜泊湖地区全新世玄武岩的地球化学特征及其深部过程探讨

镜泊湖地区全新世玄武岩分布在镜泊湖西北方向的“火山口森林”地区和蛤蟆塘地区。这两个地区相距只有１５ｋｍ,但其玄武质岩石在岩石学上具有明显的区别,前者为碱性橄榄玄武岩,后者为白榴石碱玄岩,并且具有钛角闪石、金云母和歪长石巨晶,而前者则没有这些巨晶。对它们的地球化学特征研究表明,两个地区的玄武夺石虽然均属于偏钠质的碱性玄武岩,但是白榴石碱玄岩相对于碱性橄榄玄武岩总体上具有高的Ａｌ２Ｏ３、Ｎａ２Ｏ、Ｋ２     

云南会泽铅锌矿喷流沉积成因研究

会泽铅锌矿床的成因认识各异,曾认为是沉积—改造层控型矿床。研究前人资料、结合亲历找矿实践,讨论该矿床另一种不同的成矿方式。研究矿床地质、地球化学、同位素组成、包裹体、方铅矿年龄测定和成矿温度测试等表明:会泽铅锌矿属海底热卤水喷流沉积—改造层控型矿床,与芒特—艾萨型热卤水喷流沉积层控矿床类似。     

Eocene mafic volcanism in northern Anatolia: its causes and mantle sources in the absence of active subduction

Eocene mafic volcanic rocks occurring in an E–W-trending, curvilinear belt along and north of the Izmir–Ankara–Erzincan suture zone (IAESZ) in northern Anatolia, Turkey, represent a discrete episode of magmatism following a series of early Cenozoic collisions between Eurasia and the Gondwana-derived microcontinents. Based on our new geochronological, geochemical, and isotope data from the Kartepe volcanic units in northwest Anatolia and the extant data in the literature, we evaluate the petrogenetic evolution, mantle melt sources, and possible causes of this Eocene volcanism. The Kartepe volcanic rocks and spatially associated dikes range from basalt and basaltic andesite to trachybasalt and basaltic trachyandesite in composition, and display calc-alkaline and transitional calc-alkaline to tholeiitic geochemical affinities. They are slightly to moderately enriched in large ion lithophile (LILE) and light rare earth elements (LREE) with respect to high-field strength elements (HFSE) and show negative Nb, Ta, and Ti anomalies reminiscent of subduction-influenced magmatic rocks. The analysed rocks have ⁸⁷Sr/⁸⁶Sr_(i) values between 0.70570 and 0.70399, positive ?_Nd values between 2.7 and 6.6, and Pb isotope ratios of ²⁰⁶Pb/²⁰⁴Pb_(i) = 18.6–18.7, ²⁰⁷Pb/²⁰⁴Pb_(i) = 15.6–15.7, and ²⁰⁸Pb/²⁰⁴Pb_(i) = 38.7–39.1. The ⁴⁰Ar/³⁹Ar cooling ages of 52.7 ± 0.5 and 41.7 ± 0.3 Ma obtained from basaltic andesite and basalt samples indicate middle to late Eocene timing of this volcanic episode in northwest Anatolia. Calculated two-stage Nd depleted mantle model (T_DM) ages of the Eocene mafic lavas range from 0.6 to 0.3 Ga, falling between the T_DM ages of the K-enriched subcontinental lithospheric mantle of the Sakarya Continent (1.0–0.9 Ga) to the north, and the young depleted mantle beneath central Western Anatolia (0.4–0.25 Ga) to the south. These geochemical and isotopic features collectively point to the interaction of melts derived from a sublithospheric, MORB-like mantle and a subduction-metasomatized, subcontinental lithospheric mantle during the evolution of the Eocene mafic volcanism. We infer triggering of partial melting by asthenospheric upwelling beneath the suture zone in the absence of active subduction in the Northern Neotethys. The geochemical signature of the volcanic rocks changed from subduction- and collision-related to intra-plate affinities through time, indicating an increased asthenospheric melt input in the later stages of Eocene volcanism, accompanied by extensional deformation and rifting.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS