Wavelet analysis and interpretation of gravity data in Sichuan-Yunnan region, China

Introduction Sichuan-Yunnan region, located in the east margin of Qinghai-Xizang (Tibetean) Plateau, is a transitional zone between the rapidly upheaving Tibetean Plateau and relatively steady Yangtze Platform. Under the pressure exerted by the northward movement of Indian Plate, Sichuan-Yunnan region has been undergone strong deformation and regmagenesis, becoming one of the regions with the most intensive seismicity in the world. The research on the tectonics and seismicity there is alw…     

Establishment of apparent quantum yield and maximum ecosystem assimilation on Tibetan Plateau alpine meadow ecosystem

The alpine meadow is widely distributed on the Tibetan Plateau with an area of about 1.2×106kn2. Damxung County, located in the hinterland of the Tibetan Plateau, is the place covered with this typical vegetation. An open-path eddy covariance system was set up in Damxung rangeland station to measure the carbon flux of alpine meadow from July to October,2003. The continuous carbon flux data were used to analyze the relationship between net ecosystem carbon dioxide exchange (NEE) and photosynthetically active radiation (PAR), as well as the seasonal patterns of apparent quantum yield (α) and maximum ecosystem assimilation (Pmax).Results showed that the daytime NEE fitted fairly well with the PAR in a rectangular hyperbola function, with α declining in the order of peak growth period (0.0244 μmolCO2 · μmol-1pAR) ＞early growth period ＞ seed maturing period ＞ withering period (0.0098 μmolCO2 · μmol-1pAR).The Pmax did not change greatly during the first three periods, with an average of 0.433mgCO2· m-2· s-1, i.e. 9.829 μmolCO2· m-2· s-1. However, during the withering period, Pmax was only 0.35 mgCO2 · m-2 · s-1, i.e. 7.945 μmolCO2 · m-2 · s-1. Compared with other grassland ecosystems, the α of the Tibetan Plateau alpine meadow ecosystem was much lower.     

Macropores as preferential flow paths in meander bends

Macropores are subsurface connected void spaces caused by processes such as fracture of soils, micro‐erosion, and fauna burrows. They are common near streams (e.g. hyporheic and riparian zones) and may act as preferential flow paths between surface and groundwaters, affecting hydrologic and biogeochemical processes. We tested the hydrologic function of macropores by constructing an artificial macropore within the saturated zone of a meander bend (open macropore, ‘OM’) and later filling its upstream end (partially filled macropore, ‘PFM’). For each treatment, we injected saline tracer at an upgradient monitoring well within the meander and monitored downgradient hydraulics and tracer transport. Pressure transducers in monitoring wells indicated hydraulic gradients within the meander were 32% higher perpendicular to and 6% higher parallel to the macropore for the OM than for the PFM. Additionally, hydraulic conductivities measured via falling head tests were 29 to 550 times higher along the macropore than in nearby sediment. We used electrical conductivity probes in wells and electrical resistivity imaging to track solute transport. Transport velocities through the meander were on average 9 and 21% higher (per temporal moment analysis and observed tracer peak, respectively) for the OM than for the PFM. Furthermore, temporal moments of tracer breakthrough analysis indicated downgradient longitudinal dispersion and breakthrough tracer curve tailing were on average 234% and 182% higher for the OM, respectively. This suggests the OM enabled solute transport at overall shorter timescales than the matrix but also increased tailing. Our results demonstrate the importance of macropores to meander bend hydrology and solute transport. Copyright © 2012 John Wiley & Sons, Ltd.     

GEOPHYSICAL EXPLORATION

正20141074Bao Xijie(Research Institute of Exploration and Development,Daqing Oilfield Company,PetroChina,Daqing 163712,China)Gather Optimal Processing and Application Effect of Prestack AVA Instantaneous Inversion     

四极法电阻率测量在石油管道防腐蚀中的应用

土壤电阻率是地下石油管道一个重要的腐蚀性指标,因为管道的腐蚀程度和土壤电阻率的大小密切相关。本文介绍了四极法电阻率测量的原理和实施过程,并应用于某石油管道周围土壤的勘测,对测试数据做了处理和分析,为输油管道施工设计的防腐蚀提供了科学依据。     

History of faulting in the Northern Hastings Block,southern New England Orogen

Brittle failure is common in the Devonian to Permian rocks in the Northern Hastings Block (NHB) and is manifested by faults of different orientation and kinematic histories, but the timing of fault movement is not well defined. In this study, faults in the NHB were analysed with the map pattern of cross-cutting faults used to estimate the relative time of movement and relationship to other faults. We defined five episodes of faulting or fault reactivation that affected the NHB. The Yarras Fault System on the southwestern side of the NHB and the Parrabel Fault and related faults on the eastern side of the NHB are the two major fault systems responsible for transporting and rotating the NHB in the late Carboniferous. Faults on the eastern, northeastern and northern part of Parrabel Dome started and stopped moving after emplacement of the Hastings Block and before the intrusion of the Werrikimbe Triassic granitoids. We suggested that the movement on the major bounding faults is related to the accommodation of the NHB to the folding and cleavage development in the adjoining Nambucca Block, and is associated with the earliest part of the Hunter–Bowen Orogeny. Limited dextral movement on the extensions of the Taylors Arm Fault System caused minor displacements in the northeastern part of the NHB during the Late Triassic. Some small faults cut the Triassic granitoids or Triassic Lorne Basin sediments indicating tectonic activity continued post-Triassic.     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

三维高密度电阻率法在堤坝工程中的模拟试验

为检测堤坝中裂隙、洞穴及渗漏层等隐患的存在,利用三维高密度电阻率法对数字模型和物理模型建立的裂隙隐患进行探测,结果表明室内建立的物理模型在立体图和分层切片图中裂隙的形态有些变化,但其分布范围、位置与相对各自模型中实际的比例尺寸相差不大,说明数值模拟得出的结论可以为实际工程进行理论指导,具有一定的参考价值。     

吉林地区地电阻率震兆异常对比分析

对采用形态法、归一化变化速率法和各向异性度法提取到的吉林省内深源地震以及浅源地震前的地电阻率异常变化进行对比分析,结果表明:(1)震前地电阻率出现1~2年尺度中期异常,甚至短期异常,异常以负异常为主;(2)震前地电阻率原始月均值异常变化幅度1%,表明数字地电仪捕捉电信号灵敏度的提高,更与台址构造密不可分;(3)震前地电阻率出现异常变化,震后恢复到正常变化形态,反映出震前震中区地下应力的变化,震后区域构造应力场重新调整并逐渐恢复的过程。