浅析混凝土质量通病防治的措施

在混凝土工程施工时，经常会发现诸如蜂窝、麻面、孔洞、露筋、缝隙、夹层、缺棱掉角、表面不平整。混凝土强度不够，均质性差等质量通病。在分析产生混凝土施工质量问题原因的基础上，有针对性地提出了各种防治措施。     

伊敏五牧场区煤质特征及变质规律

伊敏五牧场区存在着从褐煤到贫煤完整的变质系列,其主要煤变质类型为接触变质.在本区煤系地层底部有一酸性侵入岩体,该侵入岩体是引起本区煤变质的直接热源,它提供了褐煤向烟煤转化的热动力.本区出现的隐爆角砾岩也是受热不均匀或热叠加造成煤类复杂多变的原因.区内构造十分发育,构造条件是煤变质的又一主要因素.研究该区煤变质规律对伊敏煤田及海拉尔褐煤盆地烟煤预测具有指导作用.     

层次分析法(AHP)在三江平原地质环境质量评价中的应用

应用层次分析法(AHP)对影响三江平原环境地质质量的岩石、土壤和水3个子系统分别进行评价，通过分析影响各子系统的主要因子，建立子系统层次结构模型和质量指数数学模型，得出各子系统的质量指数，从而评价出各个子系统的质量状况。在此基础上，建立地质环境系统质量评价的层次结构模型和数学模型，计算出地质环境质量指数，并对该地区的质量状况进行评价，得出三江地区总体环境地质状况是好的结论。     

区域水资源可持续利用的综合评价方法

水资源可持续利用指标体系及评价方法是水资源可持续利用研究的核心问题之一。以复合系统理论为基础,将水资源、社会经济和环境组成的复合系统定义为水资源可持续利用系统(RSWRS系统)。应用Bossel可持续发展基本定向指标框架,建立了水资源可持续利用指标评价体系。应用系统综合评价法,权重采用基于Bossel评分标准,以参考状态的离差平方和最大法计算,建立了以RSWRS系统发展综合指数和发展态势度量模型。以陕西省为例,进行了水资源可持续利用的综合定量评价。     

WAFS产品中GRIB资料中国区产品评估

为了给使用WAFS产品的用户提供量化参考依据，选取WAFS产品中常用区域和层次的GRIB数据，利用由国家气象中心提供的风、温客观分析网格点资料，与WAFS中同时刻的预报场产品（风、温网格点资料），用均方根误差进行数字化形式分析比较。结果表明：WAFS提供的风、温预报，通常是短时效的风、温预报比长时效的风、温预报更接近客观分析场；低层的预报比高层的预报更接近客观分析场；风的预报以v矢量的预报优于u矢量的预报；风的误差主要来源于u矢量的误差。     

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.     

A multidisciplinary multi-scale framework for assessing vulnerabilities to global change

Terrestrial ecosystems provide a number of vital services for people and society, such as food, fibre, water resources, carbon sequestration, and recreation. The future capability of ecosystems to provide these services is determined by changes in socio-economic factors, land use, atmospheric composition, and climate. Most impact assessments do not quantify the vulnerability of ecosystems and ecosystem services under such environmental change. They cannot answer important policy-relevant questions such as 'Which are the main regions or sectors that are most vulnerable to global change?’ 'How do the vulnerabilities of two regions compare?’ 'Which scenario is the least harmful for a sector?’This paper describes a new approach to vulnerability assessment developed by the Advanced Terrestrial Ecosystem Analysis and Modelling (ATEAM) project. Different ecosystem models, covering biodiversity, agriculture, forestry, hydrology, and carbon sequestration are fed with the same Intergovernmental Panel on Climate Change (IPCC) scenarios based on the Special Report on Emissions Scenarios (SRES). Each model gives insights into specific ecosystems, as in traditional impact assessments. Moreover, by integrating the results in a vulnerability assessment, the policy-relevant questions listed above can also be addressed. A statistically derived European environmental stratification forms a key element in the vulnerability assessment. By linking it to other quantitative environmental stratifications, comparisons can be made using data from different assessments and spatial scales.     

可持续发展评估指标、方法及应用研究

可持续发展评估指标及方法研究是可持续发展定量评估研究的基础,是实施可持续发展管理的依据,是生态经济学与可持续发展研究的前沿领域和热点问题之一. 在概括介绍可持续发展评估的工具--指标/指数的概念和功能、国际上代表性可持续发展研究机构指标选取的原则的基础上,全面分析归纳了可持续发展指标(体系)的类型及其框架模式. 详细介绍了联合国可持续发展委员会(UNCSD)、经济合作与发展组织(OECD)、世界保护同盟(IUCN)、世界银行等国际上代表性机构的可持续发展系统性指标体系的最新研究进展,并分析了这些系统性指标体系的优缺点. 深入分析了国际上典型的社会发展类、经济发展类、生态环境类可持续发展指标(指数)的研究、开发与实际评估应用的情况. 最后,总结了当前可持续发展指标(体系)研究的特点与趋势.     

基于栅格空间信息定量化的湖南西部地区生态环境综合评价

以湖南西部地区为研究区域,采用遥感影像作为主要数据源,针对区域主要生态问题,利用栅格数据结构为主的数字环境模型,建立了生态环境质量综合评价模型. 对区域生态环境质量的空间分异格局进行了研究,通过将评价结果与数字高程模型迭加分析,研究了生态环境质量的垂直地带性分布规律,探索适合以山高坡陡为主要地貌特征的山区生态评价方法,结果显示,湖南西部地区生态环境综合指数呈正态分布,大部分地区环境质量属一般. 总体环境状况东南部好于西北部,河谷盆地优于山地. 研究表明,利用遥感和地理信息系统技术进行区域生态环境评价,具有数据采集快速、客观,评价和制图自动化,评价结果空间定位精度高,直观性与实用性强等优点.     

四平地区生态地质环境的研究

通过对四平地区生态地质环境的调查，对该区水、土壤、大气、区域稳定性、生态资源、地层条件、放射性、矿藏、地方病、旅游地质及垃圾等进行环境现状综合评价。利用ISODATA模糊聚类分析法对该区的生态地质环境质量进行了分区。并利用面积加权法计算出该区的生态地质环境质量评价结果为中上等水平。