高压条件下土的冻融试验装置研制及应用

深部土体冻融后的物理力学性质对深部人工冻结工程意义重大. 针对该问题, 在以往土的冻融试验装置的基础上, 设计出适用于高压条件下土的室内冻融试验装置, 并给出了高压条件下土的冻融试验方法. 基于该装置, 对有压条件下兰州黄土在不同冷端温度下的单向冻结特征进行了试验研究. 结果表明: 无压单向冻结过程中土的变形以冻胀为主, 而高压情况下则主要表现为压缩变形. 在有压单向冻结过程中, 试样内部仍然存在着明显的水分重分布过程. 试验分析表明, 该试验装置能够为高压条件下土的冻结特征及冻融作用后土的物理力学性质研究提供技术支持.     

鄂尔多斯盆地陇东地区三叠系延长组长3油层组石油运移与充注研究

鄂尔多斯盆地是我国第二大沉积盆地,中生界延长组富含丰富的油气资源。陇东地区位于鄂尔多斯盆地西南部,延长组长3段是该区重要的含油层系。在长3油层组原油特征和油源条件分析的基础上,对长3原油中含氮化合物组成和分布进行了探讨,结合成藏期分析,研究了鄂尔多斯盆地陇东地区长3油层组石油运移特征和注入方向。结果表明,长3油层组原油含氮化合物的分布与组成在纵向和横向上均存在明显的运移分馏效应,较好地指示了该区石油的运移。晚侏罗世至早白垩世,鄂尔多斯盆地延长组长7优质烃源岩进入生烃门限,并开始大量生烃,且以垂向、侧向、垂向-侧向交替式混合运移的方式,从盆地中心和生烃中心向西部和西南侧向运移和充注,油气充注点位于M18、Z71和Z49等井区周边区域。     

铜陵矿集区冬瓜山矿床斑岩-矽卡岩型矿床成矿作用过程中的Cu同位素地球化学行为初步研究

本文报道了长江中下游铜陵矿集区内冬瓜山斑岩-矽卡岩型Cu-Au矿床中硫化物、石英闪长岩体和赋矿围岩的Cu同位素组成特征.其中,硫化物的δ65 Cu变化范围为-0.54‰～0.95‰,变化范围较大,达1.5‰,表明高温成矿体系下铜同位素发生分馏,铜同位素具有示踪高温成矿作用过程的潜力.不同空间位置的黄铜矿的铜同位素组成呈现出空间分带特征,表现为从岩体和斑岩型矿体→近岩体矽卡岩→矽卡岩型矿体,随着远离岩体,黄铜矿的铜同位素组成逐渐变重.导致斑岩-矽卡岩型矿床铜同位素出现空间分带的主要原因是矿化过程中铜同位素发生分馏.并且,对于冬瓜山矿床来讲,导致铜同位素组成空间分带的分馏不是发生在Cu在气-液两相之间分配的过程中,而是发生在硫化物从流体中沉淀出来的过程中.在硫化物的沉淀过程中,铜的重同位素优先在流体中富集,轻同位素在沉淀中富集,随着流体向外迁移,硫化物沉淀的进行,残余热液流体会逐渐富集铜的重同位素.硫化物的铜同位素组成可以用来反演和指示成矿流体的迁移方向.     

大水金矿床金的迁移形式和沉淀机制探讨

基于大水金矿床地质特征和矿物流体包裹体显微测温研究成果,对金在成矿过程中的迁移形式和沉淀机制进行了探讨。研究认为,金矿床在主成矿作用过程中金主要以AuC12-、Au(HS)2-、AuH3SiO40形式迁移,少量以硫络合物、硫氢络合物、胶体溶液、砷络合物(配合物)及地幔流体等形式迁移。推断水—岩反应(尤其是硅化和硫化作用)和以深部流体为主与古大气水的均一化流体的混合作用以及在此过程中的降温减压作用是金沉淀的重要机制。     

On-chip earthquake simulation model using potentials

A two-dimensional (2-D) Cellular Automata (CA) dynamic system constituted of cells-charges has been proposed for the simulation of the earthquake process. The CA model has been calibrated with the use of real data. The calibration incorporates major seismic characteristics of the area under test. The simulation results are found in good quantitative and qualitative agreement with the recorded Gutenberg–Richter (GR) scaling relations. The model is enriched with a powerful multi-parameter interface that enables the user to load real data from different regions. This paper examines the on-chip realisation of the model and its instrumentation. The CA model hardware implementation is based on Field Programmable Gate Array (FPGA) logic. It utilises an array of 32 × 32 cells. Parameters that construct the local CA rule constitute the input data. The initial seed, which to some extent corresponds to the seismic features of the area under test, is loaded in a semi-parallel way and the process is completed in a certain number of time steps. The automatic response of the processor provides the corresponding GR scaling law of the area under study. The hardware implementation of the CA-based earthquake simulation model is advantageous in terms of low-cost, high-speed, compactness and portability features. It can operate as a preliminary data-acquisition filter that accelerates the evaluation of recorded data as far as its origin time, spatial and magnitude completeness and quality are concerned. Software that performs reliable automatic phase picking, as well as data elaboration, can be assembled next to the earthquake recording instruments (the whole network) output to assure a quick and reliable iteration of the focal parameters of a recorded earthquake (epicentre coordinates, focal depth and magnitude). The dedicated processor can be accommodated right after this stage (before any manual elaboration) focusing on the near real-time development of a reliable qualitative dynamical seismic record and a mapping of the seismic characteristics of the area.     

塔里木盆地塔中隆起及北围斜区断裂体系与油气成藏关系

笔者探讨了断裂在油气聚集中的作用,它是制约塔中隆起及北围斜区油气分布规律的关键因素。基于地震资料断裂解析,塔中隆起及北围斜区断裂体系主要由北西—南东延伸的压扭性断裂带与北东—南西延伸的走滑断裂构成。断裂体系主要形成于中晚加里东中期,此后经历了晚加里东、晚海西和喜山期的继承性活动与改造。中加里东中期构造是该区构造的主要定型期,断裂不仅控制了构造带发育,也是风化壳岩溶储层、礁滩相储层、热液溶蚀碳酸盐岩储层形成关键因素。断裂带后期活动为油气运聚提供了通道,北北东断裂是油气由北部坳陷向隆起长距离运聚的主要通道。断裂带的复杂性造就了研究区油气具有沿断裂带分布,成藏模式多样,差异富集特征。     

Vp/Vs Anisotropy and Implications for Crustal Composition Identification and Earthquake Prediction

Abstract: The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (Ф0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (Фij) that is significantly different from the value for its isotropic counterpart (Ф0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs≤1.756 for felsic rocks, 1.7561.944 fluid-filled porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (i.e., the orientation of cracks) and the frozen fabric (i.e., foliation and lineation).     

Comparison of Positron Emission Tomography and X-ray radiography for studies of physical processes in sandstone

The migration of moisture in cores of porous homogeneous sandstone of Ledian age (Belgian Eocene, Tertiary) is monitored with PET (Positron Emission Tomography) and micro-focus X-ray radiography. In the case of PET, a nuclear medical imaging technique, ⁵⁵Co-EDTA (Ethylenediamine Tetraacetic acid) and R-¹⁸F were used as water-soluble tracers. The X-ray projection method has evolved from the better-known medical technique and allows a fast and accurate determination of the two-dimensional transient moisture content profiles. Results indicate that both techniques can deliver important information concerning physical processes in situ.     

龙池乡高位滑坡抛射机理分析

5.12汶川大地震龙门山地区发育地震高位滑坡,通常发生在10~11度的极震区,这种灾害难预测,发生速度快,容易造成惨重的生命和财产损失。本文通过在龙池乡川主坪的实地调查,对典型地震抛射滑坡形成的抛射堆积体进行剖析,探究地震加速度受地形放大效应的影响效应及崩塌被抛射的运动程式。     

The spatial and temporal changes inV p /V s before strong earthquakes in Kamchatka

A method was developed to obtain from a signal station the spatial and temporal distribution ofV _p /V _s ratios before earthquakes of magnitude>6. It was shown thatV _p /V _s values strongly depend upon the relative positions of the stations, the future large earthquake and the foci of the smaller earthquakes used forV _p /V _s determination. The appearance of a zone of anomalousV _p /V _s values with linear dimensions of the order of 100 km was noted at least 4 years before a deep earthquake of magnitude 7. Similar size anomalous zones were detected one year before some magnitude 6 earthquakes. V _p /V _s values decreased by a small but distinct amount during this time. Additionally, local short term minima inV _p /V _s ratios were observed some months before the major event. The epicenters of the large earthquakes were located within the 100 km size zone where the gradients of theV _p /V _s field were largest.