2000年以来中国大陆5级以上地震近源区的相继发震特征与预测

通过对中国大陆除新疆和东北深震区以外的主要地区2000年以来5级以上地震活动特征的研究发现,5级以上地震近源区的相继发震是某些区域地震活动的重要特征。依据这一特征可以对今后研究区内5级以上地震的后续地震作中期预测。     

陕西农村房屋抗震设防现状及对策

陕西省近年来发生的泾阳和石泉两次地震造成了农村房屋不同程度地破坏。通过对这两次地震的现场考察,分析总结了陕西农村房屋抗震设防现状及存在的主要问题,并提出了相应的改进措施及对策建议。     

试论实施防震减灾社会动员的途径与方法

0前言中国是一个多地震国家,频繁而严重的地震灾害给人民生命和财产带来了巨大的损失,防震减灾任务任重而道远。回良玉副总理2004年在全国防震减灾工作会议讲话中指出:“防震减灾是全社会共同的责任,要广泛动员社会各方的力量,积极投入到这项事业中来,使防震减灾逐步成为全社会的自觉行动。”因此,总结近40年我国防震减灾工作和改革开放的实践经验,对社会公众进行各种防震减灾宣传教育,广泛动员全社会力量,建立健全防震减灾社会动员机制,增强全社会防震减灾意识,是提高我国综合防震减灾能力,有效地促进地震灾害综合防御各项措施落实的重要途…     

Estimating severity of liquefaction-induced damage near foundation

An empirical procedure for estimating the severity of liquefaction-induced ground damage at or near foundations of existing buildings is established. The procedure is based on an examination of 30 case histories from recent earthquakes. The data for these case histories consist of observations of the damage that resulted from liquefaction, and the subsurface soil conditions as revealed by cone penetration tests. These field observations are used to classify these cases into one of three damaging effect categories, ‘no damage’, ‘minor to moderate damage’, and ‘major damage’. The potential for liquefaction-induced ground failure at each site is calculated and expressed as the probability of ground failure. The relationship between the probability of ground failure and the damage class is established, which allows for the evaluation of the severity of liquefaction-induced ground damage at or near foundations. The procedure presented herein represents a significant attempt to address the issue of liquefaction effect. Caution must be exercised, however, when using the proposed model and procedure for estimating liquefaction damage severity, because they are developed based on limited number of case histories.     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Dike intrusion associated with the 2000 eruption of Miyakejima Volcano, Japan

The model for the 2000 dike intrusion event between Kozushima and Miyakejima volcano, Japan, was reinvestigated. After the sudden earthquake swarm in Miyakejima volcano, a dike intrusion of large volume was detected by the nationwide GPS network (Geonet). The displacements detected with GPS stations over an area with a radius of about 200 km shows a distribution that is consistent with the dike source being located near Miyakejima volcano.The dike was intruded northwestwards between Miyakejima and the neighboring Kozushima volcano. We searched for the parameters in the models that reproduce the regional displacements due to dike intrusion between Miyakejima and Kozushiima islands. We tested three models, (1) the model with a single dike, (2) the model with a dike and a point dislocation source which represents a creep dislocation source and (3) the model with a dike and a deflation source which represents a magma reservoir. Though all three models can match the horizontal displacements near the source area, model 1 fails to reproduce the regional displacements in the central part of Japan. Both models 2 and 3 can reproduce the regional displacement for horizontal components. Model 3 produces slightly better results than model 2 for vertical components. The balance in the volume budget for models 2 and 3 is also consistent with the observations. These results show that we cannot distinguish between the two models using only GPS observation. As there is no direct evidence for such a large creep or ductile source (corresponds to M7 or more) as proposed in model 2 and the active seismic region migrated back and forth within the linear swarm region, the model with a dike and a deep magma source is preferable. For the deflation point source, we obtained a deflation volume of 1.5 km³ at the depth of 20 km below the dike. An additional ~0.95 km³ of volume loss through caldera collapse and edifice deflation took place at Miyakejima. We conclude that the magma that intruded the dike came in part from below Miyakejima and in part from below the sea floor between Miyakejima and Kozushima, perhaps from reservoirs at the Moho.Editorial responsibility: S Nakada, T Druitt     

Earthquake swarms preceding the 2000 eruption of Miyakejima volcano, Japan

The first sign of magma accumulating beneath Miyakejima, an island volcano in the northern Izu islands, Japan, came at around 18:00 on 26 June 2000, when a swarm of earthquakes was detected by a volcano seismic network on the island. Earthquakes occurred initially beneath the southwest flank near the summit and gradually migrated west of the island, where a submarine eruption occurred the next morning. Earthquakes then migrated further to the northwest between Miyakejima and Kozushima, another volcanic island and developed to the most intense earthquake swarm ever observed in and around Japanese archipelago. To better image how the initial magma intrusion occurred, we relocated hypocenters by using a station-correction method and a double-difference method. The relocated epicenters are generally concentrated near the upper bound of dyke intrusions inferred from geodetic studies throughout the initial stages of the 2000 eruption at Miyakejima from 26 to 27 June 2000. As for seismic activity westward off Miyakejima in the morning on 27 June, hypocenters from both a nationwide seismic network that were relocated by the double-difference method, and those from the volcano seismic network relocated by the station-correction method, formed a very shallow cluster that ascended slowly with time as it propagated northwestward from Miyakejima. This suggests that the dykes have both a radial and upward component of movement.Editorial responsibility: S. Nakada, T. Druitt     

Landslide hazard in the Nebrodi Mountains (Northeastern Sicily)

The eastern sector of the Nebrodi Mountains (NE Sicily), a part of the Apenninic-Maghrebian orogenic chain, is characterized by an high landslide hazard. The village of S. Domenica Vittoria, which lies in the area, has been particularly affected by various landslide phenomena, with resulting damage to buildings and infrastructure.The rocks outcropping in the area belong to the Cretaceous Monte Soro Flysch; they consist of an alternation of argillaceous and calcareous beds at the base and argillaceous and quartzarenitic beds at the top. The lithotechnical characteristics of the formation and the steepness of the slopes in the area lead to an elevated instability, as testified by the widespread occurrence of sub-vertical arcuate cliffs (landslide scarps) and sub-horizontal areas (landslide terraces), typical of a landslide-controlled morphology. From a kinematics point of view, the observed phenomena can be referred to multiple rotational slides, flows, and complex landslides, often with a retrogressive development and enlargement. Triggering causes lie principally in the intense rainfalls that determine the decay of the geomechanical properties of the terrain and supply discontinuos groundwater circulation that is evident in seasonal springs. Human activity, such as the construction of roads and buildings on steep slopes and dispersal of water from supply systems and sewers has a significant impact as well.Due to the instability of the area, expansion of the village, which is already limited by the morphological conditions, is made difficult by the high hazard level, especially in the areas at higher elevations, where the principal landslide scarps are located, and even more on the rims of the scarps. Considering the high hazard level, S. Domenica Vittoria has been inserted by the National Geological Service among the sites in Sicily to be monitored by means of a GPS network. The survey carried out along the entire slope hosting the village has furnished the base for geological and geomorphological knowledge needed for the planning of the network, to identify the areas at landslide risk, where parts of the village lie, including the areas of expansion of the village, the main roads, and a portion of the Favoscuro river bed.     

A statistical procedure for the analysis of seismotectonically induced hydrochemical signals: A case study from the Eastern Carpathians, Romania

Changes in the stress field of an aquifer system induced by seismotectonic activity may change the mixing ratio of groundwaters with different compositions in a well, leading to hydrochemical signals which in principle could be related to discrete earthquake events. Due to the complexity of the interactions and the multitude of involved factors the identification of such relationships is a difficult task. In this study we present an empiric statistical approach suitable to analyse if there is an interdependency between changes in the chemical composition of monitoring wells and the regional seismotectonic activity of a considered area. To allow a rigorous comparison with hydrochemistry the regional earthquake time series was aggregated into an univariate time series. This was realized by expressing each earthquake in form of a parameter “e”, taking into consideration both energetic (magnitude of a seismic event) and spatial parameters (position of epi/hypocentrum relative to the monitoring site). The earthquake and the hydrochemical time-series were synchronised aggregating the e-parameters into “earthquake activity” functions E, which takes into account the time of sampling relative to the earthquakes which occurred in the considered area. For the definition of the aggregation functions a variety of different “e” parameters were considered. The set of earthquake functions E was grouped by means of factor analysis to select a limited number of significant and representative earthquake functions E to be used further on in the relation analysis with the multivariate hydrochemical data set. From the hydrochemical data a restricted number of hydrochemical factors were extracted. Factor scores allow to represent and analyse the variation of the hydrochemical factors as a function of time. Finally, regression analysis was used to detect those hydrochemical factors which significantly correlate with the aggregated earthquake functions.This methodological approach was tested with a hydrochemical data set collected from a deep well monitored for two years in the seismically active Vrancea region, Romania. Three of the hydrochemical factors were found to correlate significantly with the considered earthquake activities. A screening with different time combinations revealed that correlations are strongest when the cumulative seismicity over several weeks was considered. The case study also showed that the character of the interdependency depends sometimes on the geometrical distribution of the earthquake foci. By using aggregated earthquake information it was possible to detect interrelationships which couldn't have been identified by analysing only relations between single geochemical signals and single earthquake events. Further on, the approach allows to determine the influence of different seismotectonic patterns on the hydrochemical composition of the sampled well. The method is suitable to be used as a decision instrument in assessing if a monitoring site is suitable or not to be included in a monitoring net within a complex earthquake prediction strategy.     

A size classification for debris flows

A 10-fold classification for debris flow size is proposed based on total volume, peak discharge and area inundated by debris. Size classes can be used for regional overview studies where detailed site investigations are either unnecessary, too costly or where the highest hazard and risk creeks need to be identified for further study. They are also useful to compare the regional impact between affected areas and the effects of rainstorms, and they allow lay-people to obtain an understanding of debris flow magnitude and consequences. Finally, different size classes allow the estimation of travel times to points of interest based on empirically derived equations. It is proposed that agencies concerned with debris flows should establish a documentation of debris flow size according to this classification, which serves as a data base for hazard and risk planning.