时域反射技术在地学研究中的应用

综合介绍了时域反射技术在地学研究中的应用。包括时域反射仪的工作原理、测量参数(特征阻抗、介电常数、土壤含水量、土壤电导率)、时域反射探针技术以及时域反射技术在农业地质、水文地质、灾害地质等研究中的应用与进展。     

柴达木盆地北缘早古生代碰撞造山系统

柴达木盆地北缘在早古生代形成了一条碰撞造山带，该造山带结构保存较完整，可分辨出深俯冲板片、火山岛弧带、蛇绿杂岩带、岛弧深成岩带等组成单元。其中，俯冲板块主要由中元古代鱼卡河岩群和中新元古代花岗片麻岩构成，在寒武纪末-奥陶纪可能全部或部分俯冲到岩石圈深部，发生了高压-超高压变质作用。火山岛弧主要由中基性火山岩、细碎屑岩等组成，成岩时代为晚寒武世-奥陶纪。蛇绿杂岩带由超镁铁质岩、辉长岩、玄武岩和少量硅质岩组成，形成于弧后扩张脊构造背景，成岩时代为寒武纪-奥陶纪。岛弧深成岩成分变化较大，由闪长岩变化到花岗岩，成岩时代为奥陶纪。而造山带北侧的欧龙布鲁克微陆块则具有双层结构，由德令哈杂岩和达肯大坂岩群构成基底，盖层为全吉群。     

中国甘肃发现世界上最大牙齿的植食性恐龙:巨齿兰州龙(新属、新种)

巨齿兰州龙（新属、新种）是发现于中国甘肃省兰州盆地早白垩世地层中的一新鸟脚类恐龙，其牙齿是世界上已知植食性恐龙中最大的。兰州龙下颌长1m，每侧有14个齿槽，而单个牙齿宽约4cm，这是已知恐龙中的首次报道。分支系统学分析发现巨齿兰州龙与非洲早白垩世Lurdusaurus arenatus关系密切。它们代表了鸟脚类恐龙进化中四足行走的笨重的一新支。兰州龙的发现也表明欧亚大陆与非洲在早白垩世具有较密切的联系。     

Investigating the propagation mechanism of unmodelled systematic errors on coordinate time series estimated using least squares

The propagation of unmodelled systematic errors into coordinate time series computed using least squares is investigated, to improve the understanding of unexplained signals and apparent noise in geodetic (especially GPS) coordinate time series. Such coordinate time series are invariably based on a functional model linearised using only zero and first-order terms of a (Taylor) series expansion about the approximate coordinates of the unknown point. The effect of such truncation errors is investigated through the derivation of a generalised systematic error model for the simple case of range observations from a single known reference point to a point which is assumed to be at rest by the least squares model but is in fact in motion. The systematic error function for a one pseudo-satellite two-dimensional case, designed to be as simple but as analogous to GPS positioning as possible, is quantified. It is shown that the combination of a moving reference point and unmodelled periodic displacement at the unknown point of interest, due to ocean tide loading, for example, results in an output coordinate time series containing many periodic terms when only zero and first-order expansion terms are used in the linearisation of the functional model. The amplitude, phase and period of these terms is dependent on the input amplitude, the locations of the unknown point and reference point, and the period of the reference point's motion. The dominant output signals that arise due to truncation errors match those found in coordinate time series obtained from both simulated data and real three-dimensional GPS data.     

黑龙江气候变暖的时空变化特征

进入80年代以来，黑龙江气温明显变暖，近120年来年平均气温上升1.4℃，春季次之，气温突变在1990年前后，从年、各季平均气温变化趋势与全国北半球及全球气温变化进行比较，年及冬季我国增暖中心在黑龙江，春季增暖中心在内蒙古北部及黑龙江省；夏秋增暖不明显，但仍有上升趋势，近50年来，50～70年代黑龙江省及全国各大区域普遍增暖不明显，80年代开始黑龙江省增暖明显，三北地区次之，90年代黑龙江增暖更加明显，而全国及其他区域上升已达到80年代北方增温幅度，这里从黑龙江变暖的事实，突变时间，与全球、北半球、全国区域的气温及雪盖海温变化关系来揭示黑龙江气候变化的时空特点。     

显式自由表面模型时间分裂格式的一个积分方案

讨论了有关显式自由表面模型的时间分裂格式中的分裂误差。在传统的积分方案中，由于采用蛙跳格式，斜压动量方程具有三层的时间离散结构，但是，正压动量方程在相应的时间层上只有二层的离散结构。因此，正压方程与斜压方程的时间离散结构是不相容的。分析结果表明，这是导致分裂误差的原因。本提出一种能保持时间离散结构相容的正压和斜压方程的时间积分方案。该积分方案的分裂误差很小因此特别适合于需要长期积分的气候研究。该方案在北太平洋的一个自由表面模型中得到了应用。     

Electrical aerosol spectrometer of Tartu University

The electrical aerosol spectrometer (EAS) of the parallel measuring principle at Tartu University is an efficient instrument for rapid measurement of the unstable size spectrum of aerosol particles. The measuring range from 10 nm to 10 μm is achieved by simultaneously using a pair of differential mobility analyzers with two different particle chargers. The particle spectrum is calculated and measurement errors are estimated in real time by using a least-squares method. Experimental calibration ensures reliability of measurement. The instrument is well suited for continuous monitoring of atmospheric aerosol.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

广西凭祥地区早二叠世的岩浆弧及其构造意义

广西凭祥地区有3种不同建造背景的二叠-三叠系，深水相的下二叠统呈一飞来峰推覆在台地型的石炭纪-早三叠世沉积和早-中三叠世浊积岩上，与前者共生的基性-超基性岩是古特提斯岩浆弧的记录，当时的被动大陆边缘在百色阳圩-田林八渡，说明洋壳向南西消减，早二叠世弧的原形成位置可能在越南境内，早-中三叠世的弧则已向北东迁移，在中越交界区形成图尔基式造山带。     

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.