高光谱遥感数据三次光滑样条滤噪

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。     

自由测站法曲线座标计算程序设计

通过对曲线测设和测点坐标计算过程的分析，把坐标计算的程序设计归结为有向直线与X轴顺时针夹角即方位角的计算和线路转向转角的计算，弥补了测点位置和计算公式分类复杂等不足，简化了程序设计和计算过程。     

MODIS数据在乌鲁木齐地区植被景观动态监测中的应用

根据EOS／MODIS卫星时次高覆盖面广的特征，选取从4．10月的MODIS晴空资料，对整个乌鲁木齐地区植被景观进行动态监测，利用植被指数最大合成法制作了每月植被指数专题图。为了能够结合物候更好地分析乌鲁木齐地区植被随季节变化趋势以及不同时期植被生长状况，我们还制作了植被景观专题图及其变化评价图。评价图的优势在于能直观地反映植被变化的趋势，并能将变化的程度数字化，还可以根据不同的评价图叠加DEM做相应的分析。为乌鲁木齐地区植被变化研究提供有效的依据。     

地质雷达及浅层地震在泥质粉砂岩中断裂带上的曲线特征

探讨了如何利用地质雷达及浅层地震有关原理判释泥质粉砂岩中隐伏断裂带的性质和特征。主要的工作方法是通过现场实测，分析地质雷达反映在张性断裂带和压性断裂带上的曲线特征，分析浅层地震相遇时距曲线在断裂带上的曲线特征。后者的主要特征有：（1）在断裂带上初至时间延长；（2）在断裂带上左右支时距曲线上下跳动的幅度均等；（3）在断裂带上跳动的长度不一；（4）在断裂带左右支时距曲线上下跳动或反相；（5）时距曲线呈喇叭口。阐明了地质雷达和浅层地震的原理及其在泥质粉砂岩中勘查断裂构造的效果     

非饱和膨胀土的土-水特征曲线研究

在干旱和半干旱地区 ,土体中含水量的变化常会引发各种工程问题。研究表明 ,非饱和土的工程性质不仅取决于土的组成、结构和应力状态 ,还与土中的吸力密切相关。非饱和土的土 -水特征曲线表达了土体中含水量与吸力的关系 ,是非饱和土研究的重要内容之一。     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

基于广义Kопытов模型及乙型水驱曲线的综合预测法

将广义Kопытов预测模型和乙型水驱曲线方法有机的结合起来，得到了油田开发中后期——递减时期的一种预测水驱开发油田的含水率、产油量、产水量及其相应的累积产量随开发时间变化的方法，此方法克服了在水驱油田预测开发指标中二者所存在的局限性。     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.