Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.     

Effects of Young's modulus on fault displacement

Elastic crack models predict a linear relationship between displacement (u) and rupture (trace) length (L) during slip in a fault zone. Attempts to find universal-scaling laws for L/u, however, have generally failed. Here I propose that these attempts have failed because they do not take into account the changes in the mechanical properties, in particular Young's modulus (stiffness), of the fault zone as it evolves. I propose that Young's modulus affects fault displacement both spatially and temporally: spatially when the trace of a fault at a given time dissects host rocks of different stiffnesses, and temporally when the stiffness of the fault zone itself changes. During the evolution of an active fault zone, the effective Young's modulus of its damage zone and fault core normally decreases, and so does the L/u ratio of the fault. By contrast, during inactive periods sealing and healing of the damage zone and core may increase the stiffness, hence the L/u ratio in subsequent slips. This model predicts that not only will the scaling of L/u within a given fault population vary in space and time, but also that of individual faults. To cite this article: A. Gudmundsson, C. R. Geoscience 336 (2004).     

MgSO4-NaOH-H2O四元交互体系在200℃水热条件下相互作用的动力学研究

利用七水硫酸镁和氢氧化镁,研究了在200℃水热条件下合成产物的物相及其随时间的变化机制。     

土地利用动态管理系统研发中的若干问题研究

土地利用管理是土地管理的核心内容之一。土地利用动态变化加剧了土地管理的压力，建设具有辅助决策功能的土地利用动态信息系统是大势所趋。本文在阐述建设此系统的重要意义基础上，讨论了系统研发中几个关键问题，即“动态”管理的实现、空间数据和属性数据集成管理和决策的初步实现等。本文提出的解决方法，对于类似土地信息系统的建设具有普遍的指导意义。     

Splash-saltation trajectories of soil particles under wind-driven rain

It is usually recognized that relatively large amounts of soil particles cannot be transported by raindrop splashes under windless rain. However, the splash-saltation process can cause net transportation in the prevailing wind direction since variations in splash-saltation trajectory due to the wind are expected in wind-driven rain. Therefore, determining the combined effect of rain and wind on the process should enable improvement of the estimation of erosion for any given prediction technique. This paper presents experimental data on the effects of slope aspect, slope gradient, and horizontal wind velocity on the splash-saltation trajectories of soil particles under wind-driven rain. In a wind tunnel facility equipped with a rainfall simulator, the rains driven by horizontal wind velocities of 6, 10, and 14 m s⁻¹ were allowed to impact three agricultural soils packed into 20×55 cm soil pans placed at both windward and leeward slopes of 7%, 15%, and 20%. Splash-saltation trajectories were measured by trapping the splashed particles at distances downwind on a 7-m uniform slope segment in the upslope and downslope directions, respectively, for windward and leeward slopes. Exponential decay curves were fitted for the mass distribution of splash-saltation sediment as a function of travel distance, and the average splash-saltation trajectory was derived from the average value of the fitted functions. The results demonstrated that the average trajectory of a raindrop-induced and wind-driven soil particle was substantially affected by the wind shear velocity, and it had the greatest correlation (r=0.96 for all data) with the shear velocity; however, neither slope aspect nor slope gradient significantly predicted the splash-saltation trajectory. More significantly, a statistical analysis conducted with nonlinear regression model of C₁(u_*²/g) showed that average trajectory of splash saltation was approximately three times greater than that of typical saltating sand grain.     

灌溉后的黄土剪切特征变化

在中国甘肃省的黑方台阶地上从上世纪60年代开始出现人类定居和开垦活动,并自1968年发展为灌溉农业。随着灌溉的进行地面已出现沉陷和滑坡。地表沉陷是由灌溉水的充填引起黄土结构崩塌造成的。然而崩塌和湿润化对剪切特征的影响目前还不清楚。为了研究湿化后的黄土剪切特征的变化,进行了对马兰黄土未经扰动和重塑土样的直接剪切盒测试。结果显示未扰动土样的粘合力和内摩擦角在湿润化后都下降了,而所观察到的重塑土的弹度参数只有少许变化。未扰动土的不饱合粘合力,据认为其受胶结物质的影响,在饱合后消失了。经灌溉的土的不饱合强度参数与未灌溉土相比表现出差异,它们可能受土壤水分的强烈影响。     

Origin of layering in cumulate gabbros in the Oman ophiolite: Insights from magnetic susceptibility measurements in the Wadi Sadm area

Abstract   Magnetic susceptibility and the anisotropy of magnetic susceptibility were measured on an 800-cm-thick succession of cumulate gabbro in the Sadm area of the Oman ophiolite. The section contained three distinct cumulate units. The susceptibility tends to decrease upward in each from a melanocratic layer (several tens of centimeters thick) to a leucocratic layer (a few meters thick). The susceptibility decreases in accordance with the decreasing number of magnetite grains, which are the alteration product mainly of olivine minerals. This suggests the cyclic downward accumulation of olivine in the cumulate gabbro. The apparent strain deduced from the patterns of magnetic and grain fabrics was the result mostly of simple shear, so that the layering of gabbro is understood to be formed primarily by a crystal cumulus process followed by simple shear deformation.     

Seismic earth pressures on rigid and flexible retaining walls

While limiting-equilibrium Mononobe–Okabe type solutions are still widely used in designing rigid gravity and flexible cantilever retaining walls against earthquakes, elasticity-based solutions have been given a new impetus following the analytical work of Veletsos and Younan [23]. The present paper develops a more general finite-element method of solution, the results of which are shown to be in agreement with the available analytical results for the distribution of dynamic earth pressures on rigid and flexible walls. The method is then employed to further investigate parametrically the effects of flexural wall rigidity and the rocking base compliance. Both homogeneous and inhomogeneous retained soil is considered, while a second soil layer is introduced as the foundation of the retaining system. The results confirm the approximate convergence between Mononobe–Okabe and elasticity-based solutions for structurally or rotationally flexible walls. At the same time they show the beneficial effect of soil inhomogeneity and that wave propagation in the underlying foundation layer may have an effect that cannot be simply accounted for with an appropriate rocking spring at the base.