附有限制条件的间接平差秩亏时解法初探

在附有限制条件的间接平差的应用中,若所列观测方程中实际用到的未知参数的个数少于所选参数的总数u时,就会出现法方程系数阵秩亏的问题。为了解决此问题,在理论公式推导的基础上,给出了一种新的解决方法,并结合算例进行了验证。     

一种适用大旋转角的GPS网三维平差方法

在工程测量中往往采用工程坐标系,该坐标系坐标轴可能与GPS采用的WGS84坐标系的相应坐标轴间存在较大的旋转角,此时若仍直接按照一般方法进行三维约束平差计算会给结果带来不利影响,本文给出了一种适用大旋转角的GPS网三维平差方法,该方法能够很好地处理大旋转角时直接采用一般三维平差模型计算带来的不利影响,同时又能够获得平差后工程网中各点的点位精度。工程应用表明该方法非常有效,具有很好的应用价值。     

A strip adjustment procedure to mitigate the impact of inaccurate mounting parameters in parallel lidar strips

Lidar (laser scanning) technology has been proven as a prominent technique for the acquisition of high-density and accurate topographic information. Because of systematic errors in the lidar measurements (drifts in the position and orientation information and biases in the mirror angles and ranges) and/or in the parameters relating the system components (mounting parameters), adjacent lidar strips may exhibit discrepancies. Although position and orientation drifts can have a more significant impact, these errors and their impact do not come as a surprise if the quality of the GPS/INS integration process is carefully examined. Therefore, the mounting errors are singled out in this work. The ideal solution for improving the compatibility of neighbouring strips in the presence of errors in the mounting parameters is the implementation of a rigorous calibration procedure. However, such a calibration requires the original observations, which may not be usually available. In this paper, a strip adjustment procedure to improve the compatibility between parallel lidar strips with moderate flight dynamics (for example, acquired by a fixed-wing aircraft) over an area with moderately varying elevation is proposed. The proposed method is similar to the photogrammetric block adjustment of independent models. Instead of point features, planar patches and linear features, which are represented by sets of non-conjugate points, are used for the strip adjustment. The feasibility and the performance of the proposed procedure together with its impact on subsequent activities are illustrated using experimental results from real data.     

基于全站仪工程控制测量的三维间接平差法

目前,利用高精度全站仪三维坐标测量功能建立三维工程控制网已成为一种趋势。针对这一问题的观测数据处理,提出了一种考虑平面观测数据和高程观测数据二者间整体性的三维间接平差方法,详细推导了水平角误差方程,天项距误差方程,斜距误差方程等关键步骤,较之已有的方法,严密性和实用性更强,具有一定的参考价值。     

基于GIS的零售商业网点选址评价模型研究

传统零售商业网点选址模型主要是基于统计的静态模型。分析了影响零售商业网点选址的人口、经济、市场竞争三个关键要素,结合GIS,提出了一种基于权重设置的零售商业网点选址评价模型,并阐述了模型的应用流程。该模型在深圳市罗湖区公共信息服务平台中进行了典型应用实现,并检验了模型的应用可行性。     

概括平差模型的解法探讨

分析了概括平差模型系数矩阵可能出现非列满秩情况的原因,研究了如何使系数矩阵为列满秩矩阵,避免了系数矩阵为非列满秩时的复杂解算过程。     

Singular value decomposition and cluster analysis as regression diagnostics tools for geodetic applications

It is well known that high-leverage observations significantly affect the estimation of parameters. In geodetic literature, mainly redundancy numbers are used for the detection of single high-leverage observations or of single redundant observations. In this paper a further objective method for the detection of groups of important and less important (and thus redundant) observations is developed. In addition, the parameters which are predominantly affected by these groups of observations are identified. This method thus complements other diagnostics tools, such as, e.g., multiple row diagnostics methods as described in statistical literature (see, e.g., Belsley et al. in Regression diagnostics: identifying influential data and sources of collinearity. Wiley, New York, 1980). The method proposed in this paper is based on geometric aspects of adjustment theory and uses the singular value decomposition of the design matrix of an adjustment problem together with cluster analysis methods for regression diagnostics. It can be applied to any geodetic adjustment problem and can be used for the detection of (groups of) observations that significantly affect the estimated parameters or that are of negligible impact. One of the advantages of the proposed method is the improvement of the reliability of observation plans and thus the reduction of the impact of individual observations (and outliers) on the estimated parameters. This is of particular importance for the very long baseline interferometry technique which serves as an application example of the regression diagnostics tool.     

Estimation of parameters in a split functional model of geodetic observations (<Emphasis Type="Italic">M</Emphasis><Subscript>split</Subscript> estimation)

The paper presents a method of estimating parameters in two competitive functional models. The models considered here are concerned with the same observation set and are based on the assumption that an observation may result from a realization of either of two different random variables. These variables differ from one another at least in the main characteristic (for example, outliers can be realizations of one variable). A quantity that describes the opportunity of identifying a single observation with one random variable is assumed to be known. That quantity, called the elementary split potential, is strictly referred to the amount of information that an observation can provide about two competitive assumptions concerning the observation distribution. Parameter assessments that maximize the global elementary split potential (concerning all observations), are called M _split estimators. A generalization of M _split estimation presented in the paper refers to the theoretical foundation of M-estimation. An erratum to this article can be found at     

基于全站仪观测数据的三维平差模型及数据处理

建立基于全站仪多维观测数据的三维网平差模型,用VisualBasic语言编制计算程序,使其自动完成控制网的平差,解决实际应用中全站仪采集数据和成果处理中存在的问题,指导测绘生产,使全站仪更方便地用于地形控制测量、工程控制测量等测绘工程中。     

网形不一致的工程控制网稳定性分析

对于施工周期较长的大型工程,通常需要对控制网进行定期复测和稳定性分析。控制网复测期间,有时会遇到点位破坏或增设新点等情况,从而使两期控制网的网形不一致。针对控制网无固定起算点和网形改变的问题,讨论控制网的稳定性分析方法,并进行实例分析,为控制网的正确使用提供重要保证。