高山峡谷区影响土壤测量找矿效果的元素表生活动特性研究

研究发现，高山峡谷区内土壤中元素的表生活动以表生富集作用为主，元素表征富集作用的程度、富集层位和粒级等受矿化作用和自然风化作用双重影响。非矿化地段土壤中元素的表生富集程度较矿化带处土壤中元素表生富集程度更强；矿化带处B层土壤比A层土壤中元素的富集强度稍大，元素明显地富集在粗粒级组分中；近矿（化）带的非矿化地段，A、B两层土壤仍受到矿化组分的影响，A层土壤比B层土壤受到的影响更加明显，粗粒级组分比细粒级组分反映敏感，C层土壤中元素在细粒级组分中轻微富集。根据本次研究结果，调整了高山峡谷区土壤测量工作方法，经试点测量验证，找矿效果良好。     

柯树背岩体的元素地球化学特征及其成矿意义

对柯树背岩体的岩石化学，稀土元素，微量元素及铀金成矿元素进行了系统的研究。研究结果表明：柯树背岩体F9大断裂（鹰潭－安远深大断裂）以东部分（东体）与F9大断裂以西部分（西体）在稀土分布模式，微量元素，铀金成矿元素及矿化特征上存在很大的差别，东体与寨背岩体类似，为同熔系列花岗岩，对铀成矿不利；西体为重熔再生岩浆成因的改造型花岗岩，对铀成矿有利，具有良好的成矿远景。     

工程场地的特征与工程地质分区

工程场地与城市在空间尺度上相去甚远 ,但工程场地所具备的与环境行为相近的共性 ,使其属性分析可以推广应用到城市建设所面对的整个工程地质环境。从这一意义上说 ,工程场地是整个城市宏观工程地质环境的微观单元 ,众多微观单元的组合构成了环境的宏观总体。为此 ,工程场地的三大属性特性、适宜性、稳定性 ,可以作为城市工程地质环境分析中分析方法的基础。从工程场地分析推广到城市工程地质环境分析 ,还将有助于保证城市工程地质环境分析的定量化水平。     

碳酸盐岩岩溶作用的元素地球化学表征--以塔河1号的S60井为例

通过对塔河地区奥陶系碳酸盐岩及其胶结物方解石的化学成分及方解石晶体微形貌研究后认为 :塔河一号S6 0井埋深 5 433.2 0～ 5 435m发育的岩溶角砾灰岩,属于高度大于 2m的大型古岩溶洞穴沉积;而埋深 5 435m中晶洞中的方解石是地表岩溶带的早中期的淡水与海水的混合带的产物。在本文中,作者指出碳酸盐岩矿物学及地球化学可有效地应用于表生岩溶作用中的深度、强度、期次以及成岩序列及古沉积环境判别等项研究中。     

遗传算法在边坡数值计算中的应用

改进了进化方向的遗传算法与有限元数值法，结合并研制了相应的软件。应用该软件对多类型岩土边坡进行弹性模量、内聚力、内摩擦角等参数反演分析，显示误差很小，收敛速度也很快，这说明改进进化方向遗传算法这种新型的优化算法在多类型岩土参数优化估计中具有独特的优势。     

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.     

GEOCHEMICAL EFFECTS OF MAJOR ELEMENTS DURING FLUID-ROCKS INTERACTION IN MARINWOBO FAULT IN THE SOUTH MARGIN AREAS OF ALTAI MOUNTAINS

There are four types of metamorphic rocks in the Marinwobo fault, i. e, cataclasite, mylonite,mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.