From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

岩体工程质量分级应用研究

岩体质量评价采用的测试技术包括地质勘察、弹性波检测和室内岩石力学试验。结合水布垭水利枢纽大坝建基岩体工程质量评价实例,对岩体工程质量分级的应用进行了研究。     

一种在异构系统中实现负载平衡的方法

提出了在异构系统实现负载平衡的区域分解算法和实现负载平衡的计算方法，利用它的负反馈性质解决了异构系统处理机计算速度测量误差造成的负载测量不准问题，并对处理机速度变化，速度测量误差、处理机数量、网格点计算量的分布等因素的影响进行了计算，结果表明本方法具有很强的平衡负载能力和较强的适应性；根据计算结果提出了解决模式网格点计算量不易测量问题的解决方案，并用扩散方程和模拟物理过程进行试验，试验表明这种方法是可行的，平衡负载的效果十分显著。     

冰云短波辐射特性参数化

该文对卷云和高层云分别构造了15种冰晶尺度分布，3种云高和云厚，总共30种冰水含量、90种冰水程长模式。对尺度小于与大于30 μm的冰晶粒子的单次散射特性分别用表面积等效冰球Mie理论和射线光学理论进行计算。采用delta-Eddington法计算了在4种不同地面反射率下冰云的多重散射辐射传输特性，提出了冰云辐射特性的参数化公式，指出参数化公式可以用于气候模式或大气环流模式。     

Amelioration of soil fertility by woody perennials in cropping fields: evaluation of three tree species in the semi-arid zone of Nigeria

Soil was sampled from cropping fields in radial patterns from beneathAcacia albida, Parkia bigloboza(Jacq.) Benth. andEucalyptus camaldulensisDehnh. near Zaria, Nigeria. Results of analysis show a significant coarsening of soil texture and a decrease in organic matter and cation exchange capacity with increasing distance from all three tree species at a depth of 0–15 cm. Concentrations of nitrogen and some exchangeable cations decreased significantly with increasing distance from beneath acacia and parkia, and soil pH decreased with increasing distance from eucalyptus. The implication of the results for land management are discussed in relation to increasing productivity and soil use sustainability.     

岩石受力状态对弹性波传播速度的影响初探

岩石所受的三向应力状态对其弹性波传播性质有一定的影响，此认识为所做的以泥质砂岩、泥岩和硅质胶结的坚硬砂岩为试样的实验所证实。实验结果表明，泥质砂岩和泥岩的ｖＰ／ｖＳ值几乎保持不变，硬质砂岩的ｖＰ／ｖＳ曲线却在应力达破坏荷载的９０％左右出现下凹现象。经热处理后的硬质砂岩这一下凹现象则更突出     

弹性波CT技术及应用

弹性波ＣＴ技术是一种新的物探方法。本文简单地介绍了该技术的方法原理及影响图像重建的因素，并以实例说明了弹性波ＣＴ技术在煤矿井下的应用效果     

席状岩浆房中的岩浆冷却及动力稳定性

关于岩浆房中岩浆的结晶分异方式一直存在着争议，其基本矛盾在于对岩浆冷却历史及热不稳定性可能引起的对流形式的理解各不相同。本文在充分考虑席状岩浆房的基本物理特征的基础上，建立了稳定岩浆体系的动态冷却模型，并以攀枝花层状岩体为例，计算了相应的温度场、密度场及粘度场。同时，提出了一种基于能量守恒的、对热不稳定性进行分析的新方法。计算了热不稳定性可能引起的对流强度、对流区域及对流时间，并深入讨论了在一定的热不稳定状态下，不同的岩浆屈服强度对对流特征参量的影响。结果表明，在该岩体的整个固化过程中，如果曾发生过自发对流，其对流也是极微弱而短暂的，不会影响中下部岩浆房中岩浆的固化和结晶。这一结论与对该岩体的实际观察相符。     

恐龙蛋化石物质组分研究

研究了ＸＬ０１恐龙蛋化石蛋腔内壁和腔内絮状物质的无机组分。采用常规的双目实体显微镜、偏光显微镜及扫描电子显微镜、电子探针和Ｘ光衍射仪，对蛋腔内主要三种矿物物相的物理性质、化学组成及矿物晶体结构进行了研究。并对腔内的矿物形态、结构特点及有利于有机大分子ＤＮＡ保存的条件做了讨论