关于岩石圈有效弹性厚度的地质理解

简要回顾了岩石圈均衡理论的发展及岩石圈区域均衡和挠曲理论在岩石圈动力学研究中起的作用,阐述岩石圈有效弹性厚度(Te)的概念和特征。强调Te的研究是地质学和地球物理学的紧密结合,即通过岩石圈挠曲理论和区域均衡原理,对地形和重力资料进行谱分析计算,来获取岩石圈的物理性质信息。计算的Te(和相应的挠曲刚度)是岩石圈等效的强度,与爆破地震、地震层析成像和大地电磁测深等方法观测到的岩石圈和地壳厚度不同,它们之间只有通过岩石圈的屈服刚度包络面(YSE)才能比较。大洋和大陆岩石圈YSE的理论计算,表明Te值显著小于地震学的地壳和岩石圈厚度。尤其对于大陆岩石圈,地壳厚度、热年龄和应变率均可显著影响岩石圈的强度。本文还以滇西为实例介绍了对相干值曲线计算的新认识和当前岩石圈Te研究的最新趋势。     

Optical properties of pseudovitrinite; implications for its origin

A set of Pennsylvanian coals from the North American coal basins, ranging in vitrinite reflectance from 0.65% to 1.75%, was examined, with special emphasis on the optical properties of pseudovitrinite. The results suggest that pseudovitrinite originates from the same material as telocollinite. Slits in the pseudovitrinite seem to have originated in situ due to low-temperature oxidation of woody material; their opening might have been facilitated by devolatilization during coalification. The dominant orientation of the slits is perpendicular to bedding. The intensity and orientation of the slits in pseudovitrinite could be important factors in predicting coalbed gas extraction from coal.     

地统计学方法在土壤学中的应用

地统计学目前在土壤科学中得到广泛的应用和发展,成为认识土壤特征的一个重要工具.地统计学的空间变异函数和克里格插值等方法是土壤性状分析的主要手段,空间变异函数主要用于描述土壤理化性状空间变异特性,不同的插值方法可优化田间试验设计和田间采样方案,克里格插值方法则特别适用于未测量点土壤属性值的估测等.近年插值方法又被广泛应用于确定区域土壤环境容量和土壤质量标准,随机模拟则用于对土壤特性进行不确定性估计等.因而,地统计学方法对我国大量土壤学资料的整合与分析具有极大的应用前景.     

Analytical prediction of aggregates' effects on the ITZ volume fraction and Young's modulus of concrete

In order to evaluate analytically the ITZ volume fraction (f_ITZ) in concrete, a three phase model is proposed for the random concrete microstructure using the Voronoï tessellation. Within this model, the ITZ local thickness is a statistical variable depending on the local paste thickness available between each couple of neighbouring aggregates. The f_ITZ is found to not exceed 7% for typical concretes. Then, the concrete Young's modulus is predicted analytically using a four‐phase generalized self consistent model but in which the proposed f_ITZ is considered. It is found that the concrete Young's modulus increases when increasing aggregates volume fraction, aggregates maximum size and the proportion of coarse aggregates and when decreasing the ITZ thickness and Young's modulus. Finally, the validity of the proposed model is discussed based on a comparison between its predictions and three sets of experimental results related to normal and high strength concretes taken from literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrologic response of engineered media in living roofs and bioretention to large rainfalls: experiments and modeling

The hydrologic response of engineered media plays an important role in determining a stormwater control measure's ability to reduce runoff volume, flow rate, timing, and pollutant loads. Five engineered media, typical of living roof and bioretention stormwater control measures, were investigated in laboratory column experiments for their hydrologic responses to steady, large inflow rates. The inflow, medium water content response, and outflow were all measured. The water flow mechanism (uniform flow vs. preferential flow) was investigated by analyzing medium water content response in terms of timing, magnitude, and sequence with depth. Modeling the hydrologic process was conducted in the HYDRUS‐1D software, applying the Richards equation for uniform flow modeling, and a mobile–immobile model for preferential flow modeling. Uniform flow existed in most cases, including all initially dry living roof media with bimodal pore size distributions and one bioretention medium with unimodal pore size distribution. The Richards equation can predict the outflow hydrograph reasonably well for uniform flow conditions when medium hydraulic properties are adequately represented by appropriate functions. Preferential flow was found in two media with bimodal pore size distributions. The occurrence of preferential flow is more likely due to the interaction between the bimodal pore structure and the initial water content rather than the large inflow rate.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Inverse modelling using PS‐InSAR data for improved land subsidence simulation in Las Vegas Valley,Nevada

Las Vegas Valley has had a long history of groundwater development and subsequent surface deformation. InSAR interferograms have revealed detailed and complex spatial patterns of subsidence in the Las Vegas Valley area that do not coincide with major pumping regions. This research represents the first effort to use high spatial and temporal resolution subsidence observations from InSAR and hydraulic head data to inversely calibrate transmissivities (T), elastic and inelastic skeletal storage coefficients (S_ke and S_kv) of the developed‐zone aquifer and conductance (CR) of the basin‐fill faults for the entire Las Vegas basin. The results indicate that the subsidence observations from InSAR are extremely beneficial for accurately quantifying hydraulic parameters, and the model calibration results are far more accurate than when using only groundwater levels as observations, and just a limited number of subsidence observations. The discrepancy between distributions of pumping and greatest levels of subsidence is found to be attributed to spatial variations in clay thickness. The Eglington fault separates thicker interbeds to the northwest from thinner interbeds to the southeast and the fault may act as a groundwater‐flow barrier and/or subsidence boundary, although the influence of the groundwater barrier to this area is found to be insignificant. Copyright © 2016 John Wiley & Sons, Ltd.     

Variational analysis of dynamics of fissured poroelastic rocks

Rocks can be modeled in a continuum framework as fissured, poroelastic materials, i.e., materials with two degrees of porosity, one due to the fissures and another one due to the pores. The governing equations of motion of fissured poroelastic rocks established by Beskos are rederived here by establishing a variational statement which also provides the boundary conditions of the problem. This is accomplished by considering strain, dissipation and kinetic energies as well as the work of external forces. The above statement is also derived here by employing the method of weighted residuals.