聚丙烯纤维复合土抗裂补强特性试验研究

将聚丙烯纤维按不同类型、不同组合、不同含量掺入土中的三轴压缩试验,研究了聚丙烯纤维复合土的应力-应变性状及对复合土强度特性的影响。试验结果表明,加固黏性土要选择分散性好的束状单丝聚丙烯纤维,而不是网状聚丙烯纤维,聚丙烯纤维按占土质量0.2%时为最佳掺入量,束状单丝聚丙烯纤维长度为6 mm+10 mm+15 mm+19 mm的4种组合较为理想,可使聚丙烯纤维复合土微结构联结强度得到明显改善,抗裂补强,黏性土抗剪强度得到极大的提高。     

强夯地基效应及加固机制浅析

强夯地基效应,是指经强夯处理使地基土的结构形式,强度和变形大小,及其作用过程发生的改变。通过对强夯过程中一系列的现象分析,揭示强夯地基效应的形成机制,对强夯地基效应的三个方面及其之间的联系进行分析,其结论对于强夯处理设计和加固机制的认识有较大意义。     

大地测量在研究青藏地壳运动及其机制中的作用

基于对GPS和重力测量数据的分析,扼要地介绍了重力与内部构造关系,大地水准面的场源与其动力效应等方面的研究内容和方法。总结了利用重力与形变资料研究青藏地区的现代地壳运动及其动力机制的研究结果。     

Determination of the elastic modulus set of foliated rocks from ultrasonic velocity measurements

Ultrasonic measurements of compressional and shear wave velocities under hydrostatic pressure up to 70 MPa were carried out on cylindrical specimens cored across and along the foliation planes. Our measurements revealed that the foliation of the metamorphic rocks induces a clear velocity anisotropy between two orthogonal directions; faster along the foliation plane and slower across the plane in most rock types. All velocity components monotonically increase with the confining pressure, probably due to the closure of microcracks distributed in rock specimens. We determined the complete set of dynamic moduli of foliated metamorphic rocks with two assumptions; transverse isotropy due to the foliation and ellipsoidal seismic energy propagation from a point source. The calculated elastic moduli referring to different directions could be valuable for the design of various engineering structures in planar textured rock mass.     

Numerical studies on the effect of temperature on the unsaturated hydraulic response of geotextiles

A series of coupled thermo-hydraulic simulations were performed on a soil–geotextile column to understand the effect of temperature on suction distribution throughout the soil column and on the hydraulic performance of the geotextile as a drainage/capillary barrier layer. Two different constant temperatures of 0 °C and 38 °C and a temperature gradient of 4 °C along the column were modeled. Changing the temperature from 0 °C to 38 °C did not have a significant effect on the suction head distribution in the soil–geotextile column. The temperature gradient resulted in appreciable thermal vapor flow and changes in suction head and hydraulic conductivity of the geotextile. During drainage, the temperature gradient and lower temperature at the top of the column increased suction in the geotextile and its ability to function as a capillary barrier. During capillary rise, the temperature gradient and lower temperature at the top of the column decreased the suction in the geotextile and its ability to function as a capillary barrier. Changing the direction of the thermal gradient reversed the water vapor flow direction and its effect on the suction in the geotextile. A temperature gradient did not have a noticeable effect on the suction head of the geotextile when positive pore pressure was developed in the geotextile and adjacent soil during drainage.     

水位下降条件下土钉加固土坡破坏特性研究

水位下降是导致滑坡的重要原因之一,而土钉是加固土坡的有效手段。进行离心模型试验,再现了水位下降时土钉加固土坡的变形和破坏过程,测量了土坡的位移变化。试验结果表明,水位下降条件下土钉加固土坡的破坏模式以绕钉破坏为主,滑裂面从坡顶逐渐向下发展至坡面;土钉加固土坡的破坏过程与变形局部化过程表现出显著的耦合变化;土钉加固机制主要表现为通过土钉与坡体的相互作用,减小土坡的变形和变形局部化程度,从而提高土坡的稳定性。增加土钉长度使得滑裂面向坡内部移动,显著减小土坡的变形及变形局部化程度,从而提高了土坡安全性。     

Numerical simulation of the shear behavior of rockfills

A strain hardening model is proposed for simulation of the shear behavior of rockfills, including the non-linear stress–strain relationship, stress-dependence of stiffness, non-linear strength envelope, and particularly the shearing contraction and dilatancy. This model utilizes the Mohr–Coulomb yield criterion, which is defined by the mobilized friction angle varying with plastic octahedral shear strain. The development of Rowe’s stress dilatancy theory is reviewed, with its limitation for rockfills highlighted. A modified solution is then proposed to derive the mobilized dilatancy angle of rockfills. Compared with large-scale triaxial testing results, it has been demonstrated that this simple model is capable of predicting the shear behavior of rockfills with fair accuracy.     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.     

数据库系统研制中的几个实用技术

本文根据几个数据系统开发发的实践经验,针对距平台数据导入,无ＤＳＮ连接、动态结账,软、硬盘备份恢复,控件优化等方面提出了几种简洁有效的实用技术。     

河南省禹州市地质灾害与防治预案

禹州市是河南省地质灾害大市。通过对该市地质灾害的表现形式、形成条件、诱发因素及其危险性的初步评估,提出了地质灾害的防治建议和预案,制定了近、中、远三期具体治理规划和达到的目标,并举出实例来说明建立预警系统和制定防治预案的可行性。