绿柱石与硅铍石原位结晶实验研究

绿柱石与硅铍石均为铍矿物家族中的主要成员,是重要的工业铍矿物,利用背散射和电子探针研究矿物特性时,常可见两者共生或发生交代的现象（饶灿,2009;Reyf, 2008; Evensen, 1999）,其结晶条件对于成矿环境与成矿机制均具有重要的指示意义。前人已进行了关于绿柱石,硅铍石等铍矿物稳定性的实验研究,但研究多采用高温淬火的高温高压实验装置,误差大,且无法原位观测矿物结晶习性（王振杰, 1992;Sirbescu et al., 2009）,本文利用热液金刚石压腔,原位观测了绿柱石与硅铍石的结晶过程,得到了它们结晶的温压条件及结晶习性。     

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes (M_w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity (M_w ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.     

Wave run-up on bermed coastal structures

Reliable estimation of wave run-up is required for the effective and efficient design of coastal structures when flooding or wave overtopping volumes are an important consideration in the design process. In this study, a unified formula for the wave run-up on bermed structures has been developed using collected and existing data. As data on berm breakwaters was highly limited, physical model tests were conducted and the run-up was measured. Conventional governing parameters and influencing factors were then used to predict the dimensionless run-up level with 2% exceedance probability. The developed formula includes the effect of water depth which is required in understanding the influence of sea level rise and consequent changes of wave height to water depth ratio on the future hydraulic performance of the structures. The accuracy measures such as RMSE and Bias indicated that the developed formula is more accurate than the existing formulas. Additionally, the new formula was validated using field measurements and its superiority was observed when compared to the existing prediction formulas. Finally, the new design formula incorporating the partial safety factor was introduced as a design tool for engineers.     

台风Haitang(0505)登陆过程地形影响的数值模拟试验

以2005年严重影响我国的登陆台风Haitang为研究对象,在用MM5模式成功模拟台风登陆前后路径、强度、降水以及结构特征的基础上,通过地形敏感性试验,分析了地形对台风的影响及其机理。结果表明:台风在经过台湾及其后在福建登陆期间的异常路径是地形诱生低压发生发展的结果;在降水强度上东部沿海特殊地形对台风北侧东南气流的辐合抬升使得暴雨增幅度1倍以上;地形对台风强度也有一定影响,约为4～5hPa。通过对有无地形影响时台风结构的比较发现地形影响主要在低层,使得高度场分裂两个中心,低层台风主体受山脉阻挡在位置上落后于高层。分析还发现台风登陆前夕移动方向西侧相当位温向西倾斜也可能与地形有关。     

EXPERIMENTAL INVESTIGATION AND ANALYSIS OF HEC-6 RIVER MORPHOLOGICAL MODEL

Only comparatively few experimental studies have been carried out to investigate the performance of the HEC-6 river morphological model. The model was developed by the Hydrologic Engineering Center of the US Army Corps of Engineers. In this study, experiments were carried out in a 20 m long concrete flume 0.6 m wide with varying rectangular cross-sections. The channel bed is paved with uniform sand of D₅₀ = 0.9 mm and D₉₀ = 1.2 mm within the test reach of 12 m. Two types of experiments were carried out with sediment transport, one under steady uniform flow and another under steady non-uniform flow conditions. Nine steady uniform flow experiments were carried out to compare the measured equilibrium relationship of flow and sediment transport rate with two bedload formulae, namely, Du Boys and Meyer–Peter and Muller, and with three total load formulae, namely, Toffaleti, Laursen and Yang. It was found that even though the sediment transport consists of a certain portion of bedload, the total load formulae give satisfactory results and better agreement than the two bedload formulae. Five steady non-uniform flow experiments were carried out under various conditions of varying bed profile and channel width and also with sediment addition and withdrawal. The measured transient water surface and bed profiles are compared with the computed results from the HEC-6 model. It was found that the Toffaleti and Yang total load formulae used in the HEC-6 model give the most satisfactory prediction of actual bed profiles under various conditions of non-uniform flow and sediment transport. The effects of Manning's n, variations of sediment inflow, various sediment transport formulae, sediment grain size and the model numerical parameters, i.e. distance interval Δx and numerical weighting factor, on the computed water surface and bed profiles were determined. It was found that the selection of the sediment transport formulae has the most significant effect on the computed results. It can be concluded that the HEC-6 model can predict satisfactorily a long-term average pattern of local scour and deposition along a channel with either a small abrupt change in geometry or gradually varying cross-sections. However, the accuracy of the model prediction is reduced in the regions where highly non-uniform flow occurs.     

Meio-epifaunal wood colonization in the vicinity of methane seeps

In deep-sea environments, plant remains of several origins are found, including branches, twigs, leaves, and wood pieces, among others. As most of the deep-sea bottoms are oligotrophic and nutrient-limited, plant remains provide an oasis of localized organic enrichment and a substrate for colonization. Sunken wood was suggested to play an important evolutionary role in the diversification of chemosynthetic ecosystems, possibly representing stepping stones for the colonization between vent and seep ecosystems. In order to understand colonization processes of the Pacific Costa Rican meio-epifaunal assemblages associated with sunken wood, a field experiment was conducted on Mound 12 (8°55.778′N, 84°18.730′W) at ~1,000 m water depth. Woodblocks were placed in four different habitats (Mussel beds, tube worms, near mussel beds, rubble bottoms), and different local environmental conditions (seepage-active and seepage-inactive sites). Seven experimental Douglas fir woodblocks (each 1,047 cm² in surface area) were deployed from the R/V Atlantis using the manned submersible Alvin in February 2009 and recovered after 10.5 months in January 2010. Sample processing and analyses led to a data set of abundance (total 9,951 individuals) and spatial distribution of nine meio-epifaunal higher taxa/groups. Meio-epifaunal densities on individual woodblocks ranged from 3 to 26 ind.10 cm². Copepods accounted for the highest abundances (75.1%), followed by nauplii larvae (11.7%) and nematodes (9.8%). The maximum number of individuals (26.3 ind.10 cm⁻²) was found in blocks placed in seepage-inactive areas (near active mussel beds) in contrast to 2.9 ind.10 cm⁻² in active areas (within a mussel bed). A hierarchical cluster analysis grouped blocks according to seepage activity and not to habitat, but tests of similarity showed no significant differences in higher taxon composition and abundances, probably owing either to substrate homogeneity or low sample size. Copepods were the most abundant representatives, suggesting that this group is one of the most successful in colonizing in the early stage of succession, in this case while hardwood substrates are not yet decomposed or bored by bivalves.     

基于破碎临界区的新型拍岸浪统计计算模型研究

When waves propagate from deep water to shallow water, wave heights and steepness increase and then waves roll back and break. This phenomenon is called surf. Currently, the present statistical calcula...     

半连续培养下东海原甲藻和中肋骨条藻种群生长过程与种间竞争研究

采用半连续培养方法研究了温度和营养盐(N和P)限制对中国东海2种重要赤潮生物东海原甲藻和中肋骨条藻生长及种间竞争的影响。结果表明,东海原甲藻在20℃和25℃时生长状态良好,具有明显的指数增长期,15℃时细胞生长明显受到影响;中肋骨条藻具有较广的温度适应性,15~25℃时均具有明显的指数增长期。东海原甲藻可以忍受低营养盐环境并种群增长,而中肋骨条藻细胞增长需要较丰富的营养盐。在营养盐充足的环境里中肋骨条藻具有竞争优势,相反,在营养盐限制的环境中,东海原甲藻是竞争的优胜者。实验结果与东海原甲藻赤潮爆发现场的环境调查结果基本一致,可以作为解释东海原甲藻赤潮形成原因的依据。     

‘Initial’ Soil Moisture Effects on the Climate in China——A Regional Climate Model Study

In this study,the effects of ‘initial’ soil moisture(SM) in arid and semi-arid Northwestern China on subsequent climate were investigated with a regional climate model. Besides the control simulations(denoted as CTL),a series of sensitivity experiments were conducted,including the DRY and WET experiments,in which the simulated ‘initial’ SM over the region 30 –50°N,75 –105°E was only 5% and 50%,and up to 150% and 200% of the simulated value in the CTL,respectively. The results show that SM change can modify ...     

Stress‐dependent hardening and failure surfaces of dry sand

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.