S-wave crustal and upper mantle's velocity structure in the eastern Tibetan Plateau——Deep environment of lower crustal flow

A teleseismic profile consisting of 26 stations was deployed along 30°N latitude in the eastern Tibetan Plateau. By use of the inversion of P-wave receiver function, the S-wave velocity structures at depth from surface to 80 km beneath the profile have been determined. The inversion results reveal that there is significant lateral variation of the crustal structure between the tectonic blocks on the profile. From Linzhi north of the eastern Himalayan Syntaxis, the crust is gradually thickened in NE direction; the crustal thickness reaches to the maximum value (~72 km) at the Bangong-Nujiang suture, and then decreased to 65 km in the Qiangtang block, to 57―64 km in the Bayan Har block, and to 40―45 km in the Sichuan Basin. The eastern segment of the teleseismic profile (to the east of Batang) coincides geographically with the Zhubalong-Zizhong deep seismic sounding profile carried out in 2000, and the S-wave velocity structure determined from receiver functions is consistent with the P-wave velocity structure obtained by deep seismic sounding in respect of the depths of Moho and major crustal interfaces. In the Qiangtang and the Bayan Har blocks, the lower velocity layer is widespread in the lower crust (at depth of 30―60 km) along the profile, while there is a normal velocity distribution in lower crust in the Sichuan Basin. On an average, the crustal velocity ratio (Poisson ratio) in tectonic blocks on the profile is 1.73 (σ = 0.247) in the Lhasa block, 1.78 (σ = 0.269) in the Banggong-Nujiang suture, 1.80 (σ = 0.275) in the Qiangtang block, 1.86 (σ = 0.294) in the Bayan Har blocks, and 1.77 (σ = 0.265) in the Yangtze block, respectively. The Qiangtang and the Bayan Har blocks are characterized by lower S-wave velocity anomaly in lower crust, complicated Moho transition, and higher crustal Poisson ratio, indicating that there is a hot and weak medium in lower crust. These are considered as the deep environment of lower crustal flow in the eastern Tibetan Plateau. Flowage of the ductile material in lower crust may be attributable to the variation of the gravitational potential energy in upper crust from higher on the plateau to lower off plateau.     

Statistical model on the surface elevation of waves with breaking

In the surface wind drift layer with constant momentum flux, two sets of the consistent surface eleva- tion expressions with breaking and occurrence conditions for breaking are deduced from the first in- tegrals of the energy and vortex variations and the kinetic and mathematic breaking criterions, then the expression of the surface elevation with wave breaking is established by using the Heaviside function. On the basis of the form of the sea surface elevation with wave breaking and the understanding of small slope sea waves, a triple composite function of real sea waves is presented including the func- tions for the breaking, weak-nonlinear and basic waves. The expression of the triple composite func- tion and the normal distribution of basic waves are the expected theoretical model for surface elevation statistics.     

Deep dynamical processes in the central-southern Qinghai-Tibet Plateau—Receiver functions and travel-time residuals analysis of north Hi-Climb

Teleseismic receiver functions and travel-time residuals along the north Hi-Climb broadband seismic array in the central-southern Qinghai-Tibet Plateau show that the lithosphere structures in the central and western Qinghai-Tibet Plateau are different. In the central Qinghai-Tibet Plateau, the Indian Plate is northward subducted beneath the Qiangtang block and arrives at the greatest depth beneath the central-southern Qiangtang block. The delaminated Indian lithospheric slab remains beneath the central Lhasa block to a depth possibly greater than that of the upper interface of the mantle transform zone. In the western Qinghai-Tibet Plateau, the Indian lithospheric plate is gently northward subducted and may have arrived to the south of Tarim plate. Due to the resistance from the gently northward subduction of the Indian mantle lithosphere in the western Qinghai-Tibet Plateau, the upwelling mantle material be-neath the Qiangtang block moves mostly toward the east to bring about the lateral eastward flow of the deep mantle hot material in the central Qinghai-Tibet Plateau.     

A cascade approach to continuous rainfall data generation at point locations

High-resolution temporal rainfall data sequences serve as inputs for a range of applications in planning, design and management of small (especially urban) water resources systems, including continuous flow simulation and evaluation of alternate policies for environmental impact assessment. However, such data are often not available, since their measurements are costly and time-consuming. One alternative to obtain high-resolution data is to try to derive them from available low-resolution information through a disaggregation procedure. This study evaluates a random cascade approach for generation of high-resolution rainfall data at a point location. The approach is based on the concept of scaling in rainfall, or, relating the properties associated with the rainfall process at one temporal scale to a finer-resolution scale. The procedure involves two steps: (1) identification of the presence of scaling behavior in the rainfall process; and (2) generation of synthetic data possessing same/similar scaling properties of the observed rainfall data. The scaling identification is made using a statistical moment scaling function, and the log–Poisson distribution is assumed to generate the synthetic rainfall data. The effectiveness of the approach is tested on the rainfall data observed at the Sydney Observatory Hill, Sydney, Australia. Rainfall data corresponding to four different successively doubled resolutions (daily, 12, 6, and 3 h) are studied, and disaggregation of data is attempted only between these successively doubled resolutions. The results indicate the presence of multi-scaling behavior in the rainfall data. The synthetic data generated using the log–Poisson distribution are found to exhibit scaling behaviors that match very well with that for the observed data. However, the results also indicate that fitting the scaling function alone does not necessarily mean reproducing the broader attributes that characterize the data. This observation clearly points out the extreme caution needed in the application of the existing methods for identification of scaling in rainfall, especially since such methods are also prevalent in studies of the emerging satellite observations and thus in the broader spectrum of hydrologic modeling.     

国家地震紧急救援训练基地废墟训练场训练功能设计

本文简要介绍了国家地震紧急救援训练基地废墟训练场废墟构筑物A的背景和工程概况,主要从搜索功能训练和救援功能训练两个方面对废墟进行了功能设计：针对废墟构筑物A在训练功能实现过程中存在的问题进行了讨论,并提出了解决方法,为废墟A能更好的满足训练功能的要求提出了建议。     

经验格林函数法与随机有限断层法在合成近场强地震动中的联合运用

本文采取将经验格林函数法与随机有限断层法相结合的方式,突出体现了各自方法的优点,通过经验格林函数法确定地震震源参数,用随机有限断层法计算参数、检验其合理性。利用1998年新疆阿图什M6．9级地震的肘L4．7级余震记录,合成了这次地震的最大余震Ms6．0级地震的加速度记录,并将合成的结果与实际记录在频域和时域做了对比,分析研究了地震动特征和这次最大余震的可能破裂特征。同时对经验格林函数法需进一步改进的方向进行了探讨。     

Comparison of source parameters estimated in the frequency and time domains for seismic events at the Rudna copper mine,Poland

Source parameters estimated in the frequency domain for 100 selected seismic events from the Rudna copper mine, with moment magnitude ranging from 1.4 to 3.6, were collected to study their scaling relations and to compare them with the parameters estimated in the time domain. The apparent stress and static stress drop, corrected for the limited bandwidth recording, increase slightly in a similar manner with increasing seismic moment. The ratio of apparent stress to static stress drop, a measure of radiation efficiency, is practically constant and its mean value is close to 0.1. For 37 seismic events, with moment magnitude between 1.9 and 3.4, source parameters were estimated in the time domain from relative source time functions, that displayed unilateral rupture propagation, and their rupture velocity could be estimated. It ranges from 0.23 to 0.80 of shear wave velocity and is almost independent of seismic moment. The fault length, estimated from the average source pulse width and rupture velocity, is clearly dependent on seismic moment and is smaller than the source radius estimated from the corner frequency on the average by about 25 percent. There is no correlation between the values of static stress drop estimated in the frequency and time domains, but the time domain stress drop is in general similar to that estimated in the frequency domain. The apparent stress increases with increasing rupture velocity, and the ratio of apparent stress to static stress drop seems also to depend on rupture velocity.     

二元函数逼近在斜坡可靠度分析中的应用研究

极限平衡分析方法是斜坡稳定性评价中的常用方法,在长期的工程实践中积累了丰富的经验,但其不能考虑斜坡岩土体中实际存在的不确定性,在应用中具有一定的局限性。可靠度分析方法可有效地考虑斜坡系统内的不确定性和相关性,但因状态函数偏导数的求解比较困难,使可靠度分析方法在实际中应用不便。为解决上述问题,根据二元函数插值逼近原理,在矩形区域上构造拉格朗日不完全双二次多项式逼近状态函数,从而近似地计算状态函数的偏导数,求得状态函数的均值和方差,并利用精度较高的一次二阶矩方法来计算斜坡的可靠指标和破坏概率。据鄂西恩施地区马堡营滑坡实例分析表明,引入二元函数插值逼近的一次二阶矩方法计算结果与剩余推力法及Monte-carlo模拟方法结果一致,其精度可满足工程需求。     

省域发展潜力影响要素及其作用机理分析

围绕区域发展潜力来源,建构了区域发展潜力影响要素分析框架,论述了外部环境、内部资源、内部能力的组成及其影响机理。得出：区域发展阶段不同,区域发展潜力影响因素的类型与质量存在分异。且不同发展阶段下发展潜力主导影响因素呈现：（1）处于农业经济主导和工业化初期的区域,受控于自然资源与条件、人口与劳动力;（2）处在工业化中、末期的区域,主导因素是区域经济基础、人力资本和发展战略;（3）处在后工业化和信息时代的区域,区域能力是其主导因素。     

陕西省耕地资源数量与经济发展关系的计量分析

基于1978-2005年陕西省耕地资源数量与经济发展的统计数据,运用协整分析、误差修正模型、脉冲响应函数和方差分解等方法分析了陕西省耕地资源数量与经济发展之间的互动关系,结果显示:1)陕西省耕地资源数量与经济发展之间存在长期均衡关系,但短期内却存在失衡,短期波动向长期均衡趋近的调整幅度为4.23%,调整力度非常小;2)经济发展的冲击可以部分解释耕地资源数量的变化,解释水平为12%以下,耕地资源数量的冲击对经济发展的解释水平在18%以下;3)耕地资源数量、经济发展均显著地受其自身波动的影响.建议从提升经济发展质量和耕地利用效率等方面采取长期性、综合性的政府干预措施.