铅锌矿床Rb-Sr定年研究综

本文在总结Rb-Sr等时线定年的基本前提和矿床Rb-Sr等时线定年存在的问题的基础上,综述了铅锌矿床流体包裹体和闪锌矿Rb-Sr等时线定年的研究进展,同时对该定年方法存在的问题进行了简要评述。综合分析表明,Rb-Sr等时线定年(尤其是闪锌矿Rb-Sr等时线定年)为铅锌矿床较理想的直接定年方法,但该定年方法还存在许多理论和技术问题,有待深入研究;铅锌矿床Rb-Sr等时线定年应以深入细致的地质、地球化学研究为基础,定年过程中必须严慎对待样品采集、样品挑选、流体包裹体溶液提取和质谱分析等各个环节。     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

地震勘探资源频率域叠加方法研究

在叠前共深度点道集内各地震道的动、静校正误差很小的情况下，地震资料时间域水平叠加方法有较好的叠加结果。但是，如果动、静校正的误差较大时，叠加效果将受到影响，即叠后振幅和分辨率都会降低。因此，提出一种频率域叠加方法。该方法既具有常规水平叠加方法能提高信噪比的优点，又能将共深度点道集内的走时时差消除，达到内相叠回的目的。几个比较叠加方法效果的有噪CDP道集叠加的例子证明了该方法的效果。     

碳酸盐岩岩溶作用的元素地球化学表征--以塔河1号的S60井为例

通过对塔河地区奥陶系碳酸盐岩及其胶结物方解石的化学成分及方解石晶体微形貌研究后认为 :塔河一号S6 0井埋深 5 433.2 0～ 5 435m发育的岩溶角砾灰岩,属于高度大于 2m的大型古岩溶洞穴沉积;而埋深 5 435m中晶洞中的方解石是地表岩溶带的早中期的淡水与海水的混合带的产物。在本文中,作者指出碳酸盐岩矿物学及地球化学可有效地应用于表生岩溶作用中的深度、强度、期次以及成岩序列及古沉积环境判别等项研究中。     

遗传算法在边坡数值计算中的应用

改进了进化方向的遗传算法与有限元数值法，结合并研制了相应的软件。应用该软件对多类型岩土边坡进行弹性模量、内聚力、内摩擦角等参数反演分析，显示误差很小，收敛速度也很快，这说明改进进化方向遗传算法这种新型的优化算法在多类型岩土参数优化估计中具有独特的优势。     

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

地下水数值计算中断层处理的"切割-导通法"

从对断层导水性能的分析出发 ,提出了地下水数值计算中断层处理的“切割—导通法” ,既考虑断层侧向导水性 ,又考虑了其垂向导水性 ,更符合断层导水的实际情况 ,也易于描述较大断裂在走向上的导水性差异。     

软土地基沉降计算的误差分析

对引起路堤荷载下软土地基沉降从竖应力、固结沉降、瞬时沉降和后期沉降的计算四个方面,常见计算方法误差的诸多因素,从受力、沉降原理上进行了详细分析并提出一些建议,以使沉降更为接近实际.     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.