纳米氢氧化镁的合成方法

以氯化镁和氨水为原料,进行各种工艺条件的试验,在此基础上通过加入各种分散剂获得过滤、洗涤性能良好的氢氧化镁沉淀,并加一定的CaCl2作为添加剂大大提高了产品的收率。根据试验得到最佳的工艺条件,制备出纯度高、成本低的纳米氢氧化镁。     

消油剂和120#燃料油对海胆DNA损伤及甲基化影响

利用120#燃料油分散液和消油剂处理的乳化液测定海胆急性毒性和慢性DNA损伤及全基因组甲基化水平变化,确定消油剂处理的120#燃料油对海胆的毒性影响。结果表明:消油剂单独使用对海胆的影响微乎其微,经消油剂处理的燃料油乳化液中的多环芳烃质量浓度明显高于分散液中的质量浓度;乳化液和分散液对海胆都有明显的毒性作用,其96h半数效应浓度(EC50)值分别为12.03g/L和29.15g/L;DNA损伤研究表明,乳化液处理的海胆肠细胞彗星拖尾情况比同质量浓度分散液中拖尾情况更加严重;全基因组甲基化水平比分散液中更低,表明乳化液的急性毒性更大,所造成的DNA损伤更加严重。结果提示消油剂的使用会增大燃料油对海胆的毒性效应。     

Biodegradation of petroleum hydrocarbons at low temperature in the presence of the dispersant Corexit 9500

Our study examined the effects of Corexit 9500 and sediment on microbial mineralization of specific aliphatic and aromatic hydrocarbons found in crude oil. We also measured gross mineralization of crude oil, dispersed crude oil and dispersant by a marine microbial consortium in the absence of sediment. When provided as carbon sources, our consortium mineralized Corexit 9500 the most rapidly, followed by fresh oil, and finally weathered oil or dispersed oil. However, mineralization in short term assays favored particular components of crude oil (2-methyl-naphthalene > dodecane > phenanthrene > hexadecane > pyrene) and was not affected by addition of nutrients or sediment (high sand, low organic carbon). Adding dispersant inhibited hexadecane and phenanthrene mineralization but did not affect dodecane and 2-methyl-naphthalene mineralization. Thus, the effect of dispersant on biodegradation of a specific hydrocarbon was not predictable by class. The results were consistent for both high and low oiling experiments and for both fresh and weathered oil. Overall, our results indicate that environmental use of Corexit 9500 could result in either increases or decreases in the toxicity of residual oil through selective microbial mineralization of hydrocarbons.     

Field experiments to improve the efficacy of gargoor (fish trap) fishery in Kuwait’s waters

Fish traps were investigated to understand the effects of season, bait type, trap size, and trap soak time on catch rates, catch composition, and trap loss rates from March 2004 to September 2005, to improve the performance and management of Kuwait’s gargoor (cage style fish trap) fishery, which used to be the nation’s most important one in terms of value and landings volume. Catch rates were the highest in April/May (5-8 kg/trap haul) and again in December (7 kg/trap haul). Bait type and trap size also affected catch rates and species composition. Of the seven baits tested, the best catch rates, >5 kg/trap haul, occurred with cuttlefish (Sepia pharaonis), but wolf-herring (Chirocentrus dorab) and mullet (Liza klunzingeri) also produced good results (4-5 kg/trap haul). Within the five tested sizes, the two largest-sized traps captured more fish and larger size fish. Analysis of variance (ANOVA) showed significant differences of catch rate among traps with different baits as well as among traps of different sizes. Duncan test further revealed these differences between two specific baits and sizes. Cluster Analysis of species composition showed more differences among different baits than among different trap sizes. Longer soak times did not result in larger catch rates, but increased trap loss. About 10-day soak time resulted in trap loss 7%, while 40-day soak time could result in a loss of around 20%. Consequently, it is recommended that the gargoor be checked every 10 or fewer days. The average overall catch rate during the study period was lower than that of 1980s (4.5 vs. 5.8 kg/trap haul), indicating a possible decline of fish abundance in Kuwait’s waters. It is recommended that the number of gargoor fishing boats and gargoors from each boat should be limited to allow stock rehabilitation.     

Complex relationships between salt type and rock properties in a durability experiment of multiple salt–rock treatments

A laboratory salt weathering experiment was performed using five salts to attack eight types of rocks to determine the relative significance of rock durability and salt aggressivity to salt crystallization damage. The influence of individual rock properties on the salt susceptibility of the rocks was also evaluated. To study the relation between pore characteristics, salt uptake, and damage, the pre‐ and post‐experiment pore size distributions of the rocks were also examined. It is observed that both salt type and rock properties influenced the damage pattern. The durability ranking of the rocks became significantly altered with the salt type while the variation in salt efficacy ranking with rock type was less pronounced. Of the five salts used, sodium chloride and aluminium sulfate were invariably ineffective with all rock types while sodium carbonate, sodium sulfate, and magnesium sulfate, were markedly more effective in damaging most types of rock used. Of the rock properties investigated, the microporosity (of pores smaller than 0·05 or 0·1 µm) showed the most significant influence on deterioration of the rocks associated with salt crystallization, whereas microporosity of pores smaller than 5 µm played a more important role in salt uptake. Pore size distribution was thus the key factor controlling salt uptake and damage. Rocks with a large number of pores (<5 µm) and a high proportion of pores (<0·05 or 0·1 µm) were particularly susceptible to salt crystallization damage. However, anomalies arose that could not be explained in terms of rock properties or salt efficacy alone. Overall, the relative influences of salt type/efficacy and rock type/properties on salt damage propensity were not clear enough to draw a reasonable conclusion. Salt crystallization damage appears to be influenced by the individual interactions between salts and rocks, which could explain the anomalous results. Copyright © 2009 John Wiley & Sons, Ltd.     

Evolution of droplets in subsea oil and gas blowouts: Development and validation of the numerical model VDROP-J

The droplet size distribution of dispersed phase (oil and/or gas) in submerged buoyant jets was addressed in this work using a numerical model, VDROP-J. A brief literature review on jets and plumes allows the development of average equations for the change of jet velocity, dilution, and mixing energy as function of distance from the orifice. The model VDROP-J was then calibrated to jets emanating from orifices ranging in diameter, D, from 0.5 mm to 0.12 m, and in cross-section average jet velocity at the orifice ranging from 1.5 m/s to 27 m/s. The d₅₀/D obtained from the model (where d₅₀ is the volume median diameter of droplets) correlated very well with data, with an R² = 0.99. Finally, the VDROP-J model was used to predict the droplet size distribution from Deepwater Horizon blowouts. The droplet size distribution from the blowout is of great importance to the fate and transport of the spilled oil in marine environment.     

Hydrodynamics of oil jets without and with dispersant: Experimental and numerical characterization

In this paper, we present the analysis of an underwater horizontal oil jet experimental measurement and Computational Fluid Dynamics (CFD) using the Reynolds Averaged Navier Stokes (RANS) equations. Two oil subsurface releases were conducted: one with crude oil and another with crude oil premixed with dispersant at the dispersant to oil ratio (DOR) of 1:20. The jet profile was captured by a camera at moderate resolution, and the instantaneous velocity was measured by a Vectrino Profiler. The velocity components, turbulence kinetic energy, and turbulence dissipation rate from the experiment agreed well with those from the CFD simulation using the k-epsilon turbulence model. The spread angle of the jet was found to be around 21° and 24° from the experiment measurement, for oil without dispersant and oil with dispersant, respectively. The latter is close to the angle of miscible jets at 23°. The jet profile of oil with dispersant had a smaller buoyancy than that without dispersant, which is probably due to the large water entrainment for the oil with dispersant jet. The cross sections of the jet for both cases gradually became flattened with distance, as the plume turned upward.     

Large-scale dispersant leaching and effectiveness experiments with oils on calm water

The use of dispersants to treat oil spills in calm seas is discouraged because there is insufficient ‘mixing energy’ to cause immediate dispersion of the oil. However, dispersants might be applied while the seas are calm, in the expectation that they would work later when sea states increase. The present study examined the persistence of dispersants in treated oil slicks on calm water in a large outdoor wave tank. Test slicks, pre-mixed with dispersant, were allowed to stand on static and flowing water for up to six days, after which their dispersibility was tested by exposing them to breaking waves. Results showed that thicker slicks exposed to calm water for up to six days dispersed completely with the addition of breaking waves. Thinner slicks and slicks exposed to water movement became less dispersible within two days. The loss of dispersibility was caused by dispersant loss rather than by oil weathering.     

甘肃“十五”数字化水位观测资料分析及地震前兆监测效能评估

通过对甘肃地区的"十五"数字化观测台网水位资料的年、月、日动态特征以及主要影响数字化水位资料的干扰因素等进行分析,发现大多数井点的资料连续可靠,特大地震的震后效应明显。目前数字化水位观测中存在的问题是个别井点的水位动态存在一些明显的突变和缺数。根据以往的震例总结,年变规律明显的井点,有可能在地震中期或中短期前兆异常监测中发挥一定的效能;观测资料日均值月动态和时均值日动态规律明显的井点,在地震短期或短临前兆监测中有可能发挥一定的效能。潮汐理论用于模拟观测资料的处理方法,也可以在数字化观测资料中应用。总体来说,甘肃地区"十五"数字化水位观测质量明显要高于"九五"台网的质量。