Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

模块化模糊神经网络的数值预报产品释用预报研究

综合应用预报量自身时间序列的拓展,数值预报产品和模块化模糊神经网络方法,进行了一种新的数值预报产品释用预报研究。将这种新方法与常规的数值预报产品完全预报(PP)方法进行了对比试验。结果表明,这种模块化模糊神经网络数值预报产品释用预报方法比PP预报方法的预报精度显著提高。并且,通过对预报模型“过拟合”现象的研究发现,这种模块化模糊神经网络的数值预报产品释用预报模型具有很好的泛化性能。     

温度客观预报自动化业务系统

介绍了一以Ｔ６３数值预报产品为因子，用卡尔曼滤波方法作４８小时最高，最低温度客观预报方法及其自动化业务系统，能补充目前地市台温度预报主要依靠主观预报的不足，对温度有一定的预报能力。     

高岭土深加工产品开发

当前世界上煅烧高岭土产品已瞄准高档化、专用化、精细化和功能化，深加工系列产品已应用于高档汽车、船舶、乳胶、颜料、化工、造纸、涂料等方面。内蒙古自治区有丰富的高岭土资源，我们应依托优势资源，尽快掌握高新技术，开发高岭土系列产品，争取在较短的时间内在国内外激烈的市场竞争中立于不败之地，为自治区的经济繁荣起到积极的推动作用。     

Bildung bromhaltiger Desinfektionsnebenprodukte nach Chlorung von Bodenseewasser in Abhängigkeit von Aufbereitungsschritten und der Bromidkonzentration

Formation of Brominated Disinfection By-products after Chlorination of Water from Lake Constance Depending on Treatment Steps and Bromide Concentration The formation of halogenated disinfection by-products (DNP) (trihalomethanes (THM), haloacetic acids (HES), haloacetonitriles (HAN), haloketones (HKE) and chloropicrin (TCNM)) was studied after chlorination (0.5 mg/L) of raw water and drinking water from Lake Constance. The objectives of this study were to investigate the effect of bromide ion on the distribution of DNP-species resulting from chlorination and to draw up a bromide mass-balance. The treatment of water from Lake Constance with ozone decreased the formation of DNP about 35% and of total organic halogens (AOX) about 45%. This decline in DNP-formation is mainly due to the formation of chloroform, dichloro- and trichloroacetic acid. Though there is only a small amount of bromide (6.2 μg/L) in water from Lake Constance, about 32% of THM, 16% of HES, and 30% of HAN contained bromine after chlorination of treated water. The addition of bromide ion (up to 1 mg/L) shifted the DNP-composition to more brominated species. The distribution of the DNP-species depends on the initial molar bromide-to-chlorine ratio. A mathematic model showed the same pattern of DNP-species depending on the initial molar bromide-to-chlorine ratio that was observed experimentally in microstrained raw water and drinking water from Lake Constance. After chlorination of microstrained raw water, 27% of the bromide were incorporated in known DNP, 34% in unknown substances, and about 39% of bromide were not converted to organic bromine. After chlorination of treated water, only 16% of the bromide were incorporated in unknown substances, whereas 34% were found in known DNP. About 50% were found as bromide again. After addition of bromide (up to 25 μg/L) to ozonated and treated water from Lake Constance, between 60 and 72% of the bromide that had reacted after chlorination were found in analyzed low-molecular DNP.     

Toxic Cyanobacteria in Greek Freshwaters, 1987—2000: Occurrence,Toxicity, and Impacts in the Mediterranean Region

In a survey in Greece from 1987 to 2000 hepatotoxic cyanobacterial blooms were observed in 9 out of 33 freshwaters. Microcystins (MCYSTs) were detected by HPLC in 7 of these lakes, and the total MCYST concentration per scum dry weight ranged from 50.3 to 1638 ± 464 μg g^—1. Cyanobacterial genera (Microcystis, Anabaena, Anabaenopsis, Aphanizomenon, Cylindrospermopsis) with known toxin producing taxa were present in 31 freshwaters. From our data and a review of the literature, it would appear that Mediterranean countries are more likely 1) to have toxic cyanobacterial blooms consisting of Microcystis spp. and 2) to have higher intracellular MCYST concentrations. A case study in Lake Kastoria is used to highlight seasonal patterns of cyanobacterial and MCYST‐LR occurrence and to assess cyanotoxin risk. Cyanobacterial biovolume was high (> 11 μL L^—1) throughout the year and was in excess of Guidance Level 2 (10 μL L^—1) proposed by WHO for recreational waters and Alert Level 2 for drinking water. Further, surface water samples from April to November exceeded Guidance Level 3, with the potential for acute cyanobacterial poisoning. Intracellular MCYST‐LR concentrations (max 3186 μg L^—1) exceeded the WHO guideline for drinking water (1 μg L^—1) from September to November with a high risk of adverse health effects. Preliminary evidence indicates that in 3 lakes microcystins are accumulated in some aquatic organisms. Generally, a high risk level can be deduced from the data for the Mediterranean region.     

Bedload transport resistance in rough open‐channel flows

During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance f_bt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict f_bt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of f_bt and grain resistance f_c suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, f_bt/f_c increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydrological connectivity of soil pipes determined by ground‐penetrating radar tracer detection

Soil pipes are common and important features of many catchments, particularly in semi‐arid and humid areas, and can contribute a large proportion of runoff to river systems. They may also signi?cantly in?uence catchment sediment and solute yield. However, there are often problems in ?nding and de?ning soil pipe networks which are located deep below the surface. Ground‐penetrating radar (GPR) has been used for non‐destructive identi?cation and mapping of soil pipes in blanket peat catchments. While GPR can identify subsurface cavities, it cannot alone determine hydrological connectivity between one cavity and another. This paper presents results from an experiment to test the ability of GPR to establish hydrological connectivity between pipes through use of a tracer solution. Sodium chloride was injected into pipe cavities previously detected by the radar. The GPR was placed downslope of the injection points and positioned on the ground directly above detected soil pipes. The resultant radargrams showed signi?cant changes in re?ectance from some cavities and no change from others. Pipe waters were sampled in order to check the radar results. Changes in electrical conductivity of the pipe water could be detected by the GPR, without data post‐processing, when background levels were increased by more than approximately twofold. It was thus possible to rapidly determine hydrological connectivity of soil pipes within dense pipe networks across hillslopes without ground disturbance. It was also possible to remotely measure travel times through pipe systems; the passing of the salt wave below the GPR produced an easily detectable signal on the radargram which required no post‐processing. The technique should allow remote sensing of water sources and sinks for soil pipes below the surface. The improved understanding of ?owpath connectivity will be important for understanding water delivery, solutional and particulate denudation, and hydrological and geomorphological model development. Copyright © 2004 John Wiley & Sons, Ltd.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.