Water level observations from unmanned aerial vehicles for improving estimates of surface water–groundwater interaction

Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.     

Measurement of stream cross section using ground penetration radar with Hilbert–Huang transform

This study presents a new method to measure stream cross section without having contact with water. Compared with conventional measurement methods which apply instruments such as sounding weight, ground penetration radar (GPR), used in this study, is a non‐contact measurement method. This non‐contact measurement method can reduce the risk to hydrologists when they are conducting measurements, particularly in high flow period. However, the original signals obtained by using GPR are very complex, different from studies in the past where the measured data were mostly interpreted by experts with special skill or knowledge of GPR so that the results obtained were less objective. This study employs Hilbert–Huang transform (HHT) to process GPR signals which are difficult to interpret by hydrologists. HHT is a newly developed signal processing method that can not only process the nonlinear and non‐stationary complex signals, but also maintain the physical significance of the signal itself. Using GPR with HHT, this study establishes a non‐contact stream cross‐section measurement method with the ability to measure stream cross‐sectional areas precisely and quickly. Also, in comparison with the conventional method, no significant difference in results is found to exist between the two methods, but the new method can considerably reduce risk, measurement time, and manpower. It is proven that the non‐contact method combining GPR with HHT is applicable to quickly and accurately measure stream cross section. Copyright © 2013 John Wiley & Sons, Ltd.     

Borehole failure analysis in a sandstone under anisotropic stresses

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.     

松辽盆地大陆科钻二开段大井眼钻井液技术

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。     

Verification and Correction of Cloud Base and Top Height Retrievals from Ka–band Cloud Radar in Boseong,Korea

In this study,cloud base height(CBH) and cloud top height(CTH) observed by the Ka-band(33.44 GHz) cloud radar at the Boseong National Center for Intensive Observation of Severe Weather during fall 2013(September-November) were verified and corrected.For comparative verification,CBH and CTH were obtained using a ceilometer(CL51) and the Communication,Ocean and Meteorological Satellite(COMS).During rainfall,the CBH and CTH observed by the cloud radar were lower than observed by the ceilometer and COMS because of signal attenuation due to raindrops,and this difference increased with rainfall intensity.During dry periods,however,the CBH and CTH observed by the cloud radar,ceilometer,and COMS were similar.Thin and low-density clouds were observed more effectively by the cloud radar compared with the ceilometer and COMS.In cases of rainfall or missing cloud radar data,the ceilometer and COMS data were proven effective in correcting or compensating the cloud radar data.These corrected cloud data were used to classify cloud types,which revealed that low clouds occurred most frequently.     

双线偏振雷达资料在数值模式中的应用: 模拟器的构建

基于Rayleigh-Gans散射原理构造一个S波段双线偏振雷达模拟器。模拟器考虑了云冰、雪、雨和雹4种水凝物,以水凝物的混合比和数浓度以及水凝物粒子的轴比、相对介电常数、下落倾角为输入量,计算得到水平/垂直偏振反射率因子、差分反射率、比差分相位等偏振量。通过二维理想飑线模拟的试验结果表明,模拟器合理地再现了二维理想飑线系统成熟期的主要偏振特征:雹的反射率较高,差分反射率较低(又称Zdr洞);对流云区的Zdr柱;层云区的反射率和比差分相位的0℃层亮带特征;雨滴反射率与差分反射率因子的“雨线”统计特征。利用该模拟器建立了模式变量和偏振雷达观测的联系,有助于未来将偏振雷达观测资料应用于模式预报效果评估及对流尺度资料同化等方面的研究和应用。      

TRMM星载测雨雷达和地基雷达反射率因子数据的三维融合

TRMM卫星上的测雨雷达(TRMMPR)探测资料分布均匀且具有很高的垂直分辨率,但灵敏度较低;地基雷达(GR)水平分辨率较高且具有较高的灵敏度,但其垂直分辨率低。通过将TRMM PR与GR反射率因子数据的三维数据融合,得到了更优的反射率因子图像。测雨雷达与地基雷达三维数据融合主要分为以下几步:测雨雷达与地基雷达数据预处理——如去杂波、衰减校正;测雨雷达与地基雷达时空匹配;选取和应用合适的三维图像融合算法;对融合后的图像进行效果评估。试验结果表明:融合后的图像不仅增大了信息量,更好地检测弱降水,还提高了空间三维(3D)分辨率,能更好地反映降水区域细节,且使得数据总体上具有更高的完整性和可靠性。此外,还将基于雷达资料估测的降水数据与地面雨量计数据进行对比,估计反射率因子数据融合在降水测量上的有效性。      

毫米波雷达与无线电探空对云垂直结构探测的一致性分析

在众多种针对云垂直结构的探测中,毫米波雷达可获取云底、云顶、云厚等完整的云垂直结构信息,并可以连续监测云的垂直剖面变化,是有力的探测手段之一。而无线电探空因其直接的测量优势,能直观、确切地描述大气湿度垂直结构,可将其进一步处理生成云垂直结构信息,并作为一种数据源用于与毫米波雷达云垂直结构探测结果进行比对,以评估毫米波雷达针对云宏观垂直结构的探测性能,为毫米波雷达更好地应用于云探测提供参考。通过获取位于北京南郊观象台的毫米波雷达2014年10月28日至2015年2月17日长达113天连续观测的反射率因子以及探空温、压、湿数据,设计或选取合适的方法对二者进行云边界的计算,并进行云高（包括云底高和云顶高）以及云层数的一致性比对分析。结果认为,除对于高层云的云顶高度毫米波雷达由于探测限制不能探测到10 km以上的云顶,某些时刻与探空产生较大差异外,在云底高度以及中低云的云顶高度上可以与探空观测取得很好的匹配效果,对于云的垂直分层上二者也有较强的一致性。该毫米波雷达具有较为准确并连续刻画10 km以下云垂直结构的能力。     

Tide,Wind, and River Forcing of the Surface Currents in the Fraser River Plume

A long-term record of surface currents from a high-frequency radar system, along with near-surface hydrographic transects, moored current meter records, and satellite imagery, are analyzed to determine the relative importance of river discharge, wind, and tides in driving the surface flow in the Fraser River plume. The observations show a great deal of oceanographic and instrumental variability. However, averaged quantities yielded robust results. The effect of river flow, which determines buoyancy and inertia near the river mouth, was found by taking a long-term average. The resulting flow field was dominated by a jet with two asymmetric gyres; the anticyclonic gyre to the north had flow speeds consistent with geostrophy. The mean flow speed near the river mouth was 14.3?cm?s^–1, while the flow further afield was 5?cm?s^–1 or less. Wind stress and surface currents were highly coherent in the subtidal frequency band. Northwesterly winds drive a surface flow to the southeast at speeds of nearly 30?cm?s^–1. Southeasterly winds drive a surface flow to the northwest at speeds reaching 20?cm?s^–1; however, there is more spatial variability in speed and direction relative to the northwesterly wind case. A harmonic analysis was used to extract the tidally driven flows. Ellipse parameters for the major tidal constituents varied considerably in both alignment and aspect ratio over the radar domain, in direct contrast to a barotropic model which predicted rectilinear flow along the Strait of Georgia. This is a result of water filling and draining the shallow mud flats north of the Fraser's main channel. The M₂ velocities at the surface were also weaker than their barotropic counterparts. However, the shallow water constituent MK₃ was enhanced at the surface and nearly as strong as the mean flow, implying that non-linear interactions are important to surface dynamics.