太湖波浪数值模拟

在太湖实际波浪观测的基础上,采用率定验证后的第三代动谱平衡方程,考虑实际水底地形、波浪折射、浅化、反射、破碎、湖流等条件下,对太湖波浪进行数值模拟,研究太湖波浪的主要影响因素.结果表明:SWAN模型可以较好地模拟风作用下太湖风浪的生成和传播过程,模型在太湖应用是合适的;波高、波长、波周期等波浪参数在太湖的分布与风速、风向、水深等因素密切相关;在相同风向、不同风速情况下,太湖波浪发展至稳定状态的时间不一样;在不同风向,相同风速持续作用下,有效波高达到稳定的时间差不多,变化趋势也比较相同.说明波浪的发展不光取决于风速的大小,还同风的持续吹的时间和风区长度有关.     

Methods and applications of 3-D wave equation common-azimuth prestack migration

To tackle the difficulties of a 3-D full volume prestack migration based on the double-square-root (DSR) one-way wave equation in practical applications, the common-azimuth migration approach is first discussed using dual-domain wave propagators under the theoretical frame of crossline common-offset migration. Through coordinate transforming, a common-azimuth prestack tau migration technology that recursively continues the source and receiver wavefields and picks up the migrated results in the two-way vertical traveltime (tau) direction is developed. The migrations of synthetic data sets of SEG/EAGE salt model prove that our common-azimuth migration approaches are effective in both depth and tau domains. Two real data examples show the advantages of wave-theory based prestack migration methods in accuracy and imaging resolution over the conventional Kirchhoff integral methods. Translated from Oil Geophysical Prospecting, 2006, 41(6): 629–634 [译自: 石油地球物理勘探]     

Experimental researches on reflective and transmitting performances of quarter circular breakwater under regular and irregular waves

A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB). Based on regular wave tests, the reflection and transmission characteristics of QCB are analyzed and a few influencing factors are investigated. Then, the wave energy dissipation as wave passing over the breakwater is discussed based on the hydraulic coefficients of QCB and SCB. In irregular wave experiments, the reflection coefficients of QCB and their spectrums are studied. Finally, the comparisons between the experimental results and numerical simulations for QCB under regular and irregular wave conditions are presented.     

Direct dating of folding events by 40Ar/39Ar analysis of synkinematic muscovite from flexural-slip planes

Timing of folding is usually dated indirectly, with limited isotopic dating studies reported in the literature. The present study investigated the timing of intracontinental, multi-stage folding in Upper Proterozoic sandstone, limestone, and marble near Beijing, North China, and adjacent regions. Detailed field investigations with microstructural, backscattered electron (BSE) images and electron microprobe analyses indicate that authigenic muscovite and sericite crystallized parallel to stretching lineations/striations or along thin flexural-slip surfaces, both developed during the complex deformation history of the study area, involving repeated compressional, extensional and strike-slip episodes. Muscovite/sericite separates from interlayer-slip surfaces along the limbs and from dilatant sites in the hinges of folded sandstones yield muscovite ⁴⁰Ar/³⁹Ar plateau ages of ∼158–159 Ma, whereas those from folded marble and limestone samples yield ages of 156 ± 1 Ma. Muscovite from thin flexural-slip planes on fold limbs and hinges yields ages within analytical error of ∼155–165 Ma. Further muscovite samples collected from extensionally folded limestone and strike-slip drag folds yield younger ages of 128–125 Ma with well-defined plateaus. To assess the potential influence of the detrital mica component of the host rock on the age data, two additional muscovite samples were investigated, one from a folded upper Proterozoic–Cambrian sandstone outside the Western Hills of Beijing and one from a folded sandstone sampled 20 cm from folding-related slip planes. Muscovite separates from these samples yield significantly older ages of 575 ± 2 Ma and 587 ± 2 Ma, suggesting that the timing of folding can be directly determined using the ⁴⁰Ar/³⁹Ar method. This approach enables the identification and dating of distinct deformation events that occur during multi-stage regional folding. ⁴⁰Ar/³⁹Ar dating can be used to constrain the timing of muscovite and sericite growth at moderate to low temperatures (<400 °C) during folding, yielding well-defined plateau ages and thereby the age of deformation in the upper crust.     

The statistics of particle velocities and accelerations under waves with directional spread

The statistics of the horizontal component of the water particle velocity vector under random waves are considered. A spread in the directions of travel of the component wave trains does not affect the rms value of the modulus r but it affects the shape of its probability distribution in such a way that the pr3bability of extreme values is reduced. For small and moderate directional spreads the modulus for a given probability of exceedance is reduced by a factor which tends to F_s as the probability of exceedance tends to zero, where F_s is the spread factor (which is typically 0.9 in temperate storms). However, the convergence on this asymptote is not complete for probabilities of engineering importance, particularly for wide directional spreads. The standard deviation of the probability distribution of the direction of the vector is reduced roughly in inverse proportion to r. The same conclusions apply to particle accelerations.     

A time-dependent numerical model of the mild-slope equation

On the basis of the previous studies, the simplest hyperbolic mild-slope equation has been gained and the linear time-dependent numerical model for the water wave propagation has been established combined with different boundary conditions. Through computing the effective surface displacement and transforming into the real transient wave motion, related wave factors will be calculated. Compared with Lin’s model, analysis shows that calculation stability of the present model is enhanced efficiently, because the truncation errors of this model are only contributed by the dissipation terms, but those of Lin’s model are induced by the convection terms, dissipation terms and source terms. The tests show that the present model succeeds the merit in Lin’s model and the computational program is simpler, the computational time is shorter, and the computational stability is enhanced efficiently. The present model has the capability of simulating transient wave motion by correctly predicting at the speed of wave propagation, which is important for the real-time forecast of the arrival time of surface waves generated in the deep sea. The model is validated against analytical solution for wave diffraction and experimental data for combined wave refraction and diffraction over a submerged elliptic shoal on a slope. Good agreements are obtained. The model can be applied to the theory research an d engineering applications about the wave propagation in a biggish area.     

2009年“莫拉克”台风登陆过程阵风特征分析

利用上海台风研究所移动观测车获取的“莫拉克”台风登陆过程中超声风、温等观测资料对地面阵风特性进行了诊断分析.结果表明,在风速时间序列中叠加有周期为3-7 min的阵风扰动,显现出明显的相干结构,即沿顺风方向阵风风速峰期有下沉运动,谷期有上升运动;阵风扰动的各向异性特征明显,沿顺风方向的阵风扰动能量最大,其次是沿侧向和垂直方向的扰动能量;沿顺风方向的阵风垂直动量通量向下传播,而沿侧风方向阵风扰动动量垂直通量总体贡献接近于0.阵风扰动沿顺风方向的积分空间尺度和时间尺度最大,沿侧风方向和垂直方向其次,均明显大于湍流的积分空间和时间尺度.此外,阵风扰动的其他特征还包括:感热垂直通量极小;当平均风速较大时阵风风向变化幅度较小,而风速较小时阵风风向变化幅度则较大;动力学分析表明,阵风扰动主要表现出重力内波的一些特性.     

南海东北部C型内孤立波的观测与分析

基于布放在南海东北部陆坡海域的5套潜标观测到的内孤立波波列数据和孤立波扰动KdV(PKdV)理论,研究内孤立波在趋浅陆架上的传播特征。得出如下结果:1)观测到的内孤立波属于C型内孤立波,即平均重现周期为(23.41±0.31)h。2)内孤立波在西传爬坡过程中,其振幅表现为先增大后减小再增大,与该海域温跃层深度的变化趋势一致;由观测数据和理论计算得到的孤立波振幅增长率(SAGR)数值接近,表明该海域的内孤立波的振幅变化可以采用由孤立波PKdV方程导出的趋浅温跃层理论来描述。3)随着水深变浅,内孤立波传播方向向北偏移,传播速度减小,即在A,B和D站位,传播方向分别为279°,296°和301°,偏转角度达22°;传播速度分别为2.36,2.23和1.47 m/s,减小38%。     

超磁致伸缩声波震源的时频特征与实测研究

宽频带、大功率、短余振声波震源是高分辨率探测大尺度复杂结构体的关键技术,为了解决探测距离与其分辨率的矛盾问题,采用超磁致伸缩材料制作的声波发射器作为震源,研制了一种新的声波探测仪器。该震源中心频率为5 kHz,激励电压300~600 V,具有辐射声功率大、余振短（3.5个周期）、频带宽（1~3 kHz）的特性;其最大的优点是每次激发的声波信号一致性好,可以采用单点多次激发,通过多次叠加的数据处理技术提高信噪比,较好地解决了声波探测距离与分辨率的矛盾,并成功地应用于煤矿采场顶煤厚度探测。现场探测结果表明：大功率声波探测系统能够有效提取4~7 m煤岩交界面的反射波信号,借助于小波多分辨分析信号处理方法,有效地提高了采场顶煤厚度探测的精度及其可靠性,为顶煤厚度精确探测提供了一条有效途径。     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.