Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.     

极地冰芯中记录的火山作用及其对气候的影响

大多数火山喷发以强酸 (主要是硫酸 )的形式在极地冰芯中留下痕迹 ,通过冰芯连续电导率 (ECM)或各个雪冰样品SO42 - 浓度测定能够恢复历史上的火山作用。极地冰芯中已知年代的火山喷发还可用于冰芯定年。极地冰芯记录的火山信号大小依赖于火山喷发的规模和类型 ,火山喷发的地理位置和酸性气体组成 ,大气气溶胶传输 ,以及沉降地点的年积累率和沉积后生过程等。单个火山喷发通常会导致数月至数年的半球乃至全球范围的气候相对变冷 (这种现象在极区变得更明显 ) ,但过去大规模的爆炸性火山喷发对气候的影响及其与气候变化之间的联系仍有待于进一步研究     

中扬子区寒武纪层序地层研究

笔者建立了中扬子区寒武系层序地层格架，研究了中扬子区层序界面和体系域特点，分析了中扬子区层序样式的基本类型及其特征。共划分出2个二级层序、14个三级层序。寒武系下统划分了1个二级层序(SS3)、6个三级层序(SQ1—SQ6)，平均延时约5．0Ma；体系域颜色普遍较深，泥质含量较高，是一套良好的烃源岩。寒武系中上统划分出1个二级层序(SS4)、8个三级层序(SQ7—SQ14)，平均延时约2．9Ma；体系域颜色普遍较浅，云质含量较高，是一套良好的储集层。总体上H型样式为主，T型样式和TH型样式数量相当，反映寒武纪水体中等。二级层序体系域和三级层序体系域都表现出明显的南北向差异性。     

深海岩芯高分辨率的古环境记录-以南海北部陆坡17940-2柱状样为例

本文将深海岩芯高分辩率记录的替代性指标分为沉积型和生物型两类。沉积型替代性指标主要包括沉积物的粒度，沉积速率，粘土矿物；生物型替代性指标主要包括有孔虫，氧同位素，古水温，有机碳通量。对比研究发现，17940—2柱状样沉积物的粒度、沉积速率、有孔虫，氧同位素，古水温，有机碳通量等指标记录海洋环境变化信息程度优于其它替代性指标；沉积型替代性指标与生物型替代性指标记录海洋环境变化信息不同步；海洋环境变化的突变与渐变影响替代性指标记录的同步性。     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.     

慕士塔格冰芯钻孔温度测量结果

2002年8月对慕士塔格冰川累积区海拔6300m左右的两根冰芯钻孔(其中—根达到冰川底部基岩)进行了温度测量，揭示了该处冰川的温度分布特征．结果表明：慕士塔格冰芯的冰温是目前中低纬地区山地冰川中最低的，达-21．79℃，该最低温度出现的位置在35m以下；冰床底部的温度为-20．76℃，也远低于其它山地冰川的冰床温度，极低的温度对成冰过程有重要影响，并有利于获得可靠的冰芯记录。     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.