Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.     

Insights into the complexity of crustal differentiation: K2O‐poor leucosomes within metasedimentary migmatites from the Southern Marginal Zone of the Limpopo Belt,South Africa

Differentiation of the continental crust is the result of complex interactions between a large number of processes, which govern partial melting of the deep crust, magma formation and segregation, and magma ascent to significantly higher crustal levels. The anatectic metasedimentary rocks exposed in the Southern Marginal Zone of the Limpopo Belt represent an unusually well‐exposed natural laboratory where the portion of these processes that operate in the deep crust can be directly investigated in the field. The formation of these migmatites occurred via absent incongruent melting reactions involving biotite, which produced cm‐ to m‐scale, K₂O‐poor garnet‐bearing stromatic leucosomes, with high Ca/Na ratios relative to their source rocks. Field investigation combined with geochemical analyses, and phase equilibrium modelling designed to investigate some aspects of disequilibrium partial melting show that the outcrop features and compositions of the leucosomes suggest several steps in their evolution: (1) Melting of a portion of the source, with restricted plagioclase availability due to kinetic controls, to produce a magma (melt + entrained peritectic minerals in variable proportions relative to melt); (2) Segregation of the magma at near peak metamorphic conditions into melt accumulation sites (MAS), also known as future leucosome; (3a) Re‐equilibration of the magma with a portion of the bounding mafic residuum via chemical diffusion (H₂O, K₂O), which triggers the co‐precipitation of quartz and plagioclase in the MAS; (3b) Extraction of melt‐dominated magma to higher crustal levels, leaving peritectic minerals entrained from the site of the melting reaction, and the minerals precipitated in the MASs to form the leucosome in the source. The key mechanism controlling this behaviour is the kinetically induced restriction of the amount of plagioclase available to the melting reaction. This results in elevated melt H₂O and K₂O and chemical potential gradient for these components across the leucosome/mafic residuum contact. The combination of all of these processes accurately explains the composition of the K₂O‐poor leucosomes. These findings have important implications for our understanding of melt segregation in the lower crust and minimum melt residency time which, according to the chemical modelling, is <5 years. We demonstrate that in some migmatitic granulites, the leucosomes constitute a type of felsic refractory residuum, rather than evidence of failed magma extraction. This provides a new insight into the ways that source heterogeneity may control anatexis.     

Deformation structures associated with the Trachyte Mesa intrusion,Henry Mountains,Utah: Implications for sill and laccolith emplacement mechanisms

Deformation structures in the wall rocks of igneous intrusions emplaced at shallow crustal depths preserve an important record of how space was created for magma in the host rocks. Trachyte Mesa, a small Oligocene age intrusion in the Henry Mountains, Utah, is composed of a series of stacked tabular, sheet-like intrusions emplaced at 3–3.5 km depth into sandstone-dominated sedimentary sequences of late Palaeozoic–Mesozoic age. New structural analysis of the spatial distribution, geometry, kinematics and relative timings of deformation structures in the host rocks of the intrusion has enabled the recognition of distinct pre-, syn-, and late-stage-emplacement deformation phases. Our observations suggest a two-stage growth mechanism for individual sheets where radial growth of a thin sheet was followed by vertical inflation. Dip-slip faults formed during vertical inflation; they are restricted to the tips of individual sheets due to strain localisation, with magma preferentially exploiting these faults, initiating sill (sheet) climbing. The order in which sheets are stacked impacts on the intrusion geometry and associated deformation of wall rocks. Our results offer new insights into the incremental intrusion geometries of shallow-level magmatic bodies and the potential impact of their emplacement on surrounding host rocks.     

渝东南下古生界页岩构造裂缝形成及分布控制因素

天然裂缝对页岩气储集和渗流有重要影响,但目前对页岩构造裂缝研究不够深入。本文通过露头、岩心裂缝观察和分析,探讨了渝东南下古生界页岩构造裂缝类型、形成机理及分布控制因素。基于裂缝特征及力学成因,将剪切裂缝分为高角度剪切裂缝、倾斜滑脱裂缝和水平滑脱裂缝。倾斜滑脱裂缝是在上覆岩层重力和水平构造应力共同作用下沿应力集中的软弱面发生剪切滑动形成,水平滑脱裂缝是在构造挤压应力作用条件下主要沿页理面方向的剪切或层间滑动形成;页理发育程度及岩层曲率是控制水平滑脱裂缝形成的关键因素,岩石矿物组成、构造作用及岩层厚度是控制其它类型构造裂缝形成和分布的主要因素,页岩岩石力学层的划分需要根据裂缝特征、岩性变化特征、岩石力学参数及沉积界面等综合确定,岩层厚度与层间构造裂缝密度呈负相关关系。     

国内外前寒武纪条带状铁建造研究现状

条带状铁建造(BIFs)主要发育于早前寒武纪时期(3.8~1.8Ga),记录了早期地球演化的重要信息且蕴含丰富的铁矿石资源。本文梳理总结了国内外BIF相关领域的研究认识及存在问题:1统计对比显示,BIF沉积事件与地幔柱、地壳增生等重大地质事件相关;2稀土元素及Nd同位素示踪表明,Fe来源于海水与海底高温热液的混合溶液,其中高温热液与海水比例为1:1000;3 BIFs缺乏负Ce异常且富集重Fe同位素,暗示沉积时古海洋整体处于缺氧环境以避免Fe~(2+)发生氧化;4一些重要科学问题尚未解决,例如Si的主要来源、沉淀机制及条带成因等;5华北克拉通BIFs多形成于约2.54Ga,BIF类型、形成时代与富矿成因等问题有待深入研究。本文认为,加强国内外典型BIFs的对比研究并适当应用现代先进测试技术,有利于探索BIF沉积的精细过程及古老克拉通的早期演化。     

Mesoscale numerical simulation study of warm fog dissipation by salt particles seeding

Based on the dynamic framework of WRF and Morrison 2-moment explicit cloud scheme, a salt-seeding scheme was developed and used to simulate the dissipation of a warm fog event during 6–7 November 2009 in the Beijing and Tianjin area. The seeding effect and its physical mechanism were studied. The results indicate that when seeding fog with salt particles sized 80 μm and at a quantity of 6 gm~(-2) at the fog top, the seeding effect near the ground surface layer is negative in the beginning period, and then a positive seeding effect begins to appear at 18 min, with the best effect appearing at 21 min after seeding operation. The positive effect can last about 35 min. The microphysical mechanism of the warm fog dissipation is because of the evaporation due to the water vapor condensation on the salt particles and coalescence with salt particles.The process of fog water coalescence with salt particles contributed mostly to this warm fog dissipation. Furthermore, two series of sensitivity experiments were performed to study the seeding effect under different seeding amounts and salt particles sizes. The results show that seeding fog with salt particles sized of 80 μm can have the best seeding effect, and the seeding effect is negative when the salt particle size is less than 10 μm. For salt particles sized 80 μm, the best seeding effect, with corresponding visibility of 380 m, can be achieved when the seeding amount is 30 g m~(-2).     

浙江盛夏一次强对流天气的特征及其成因分析

利用常规气象观测资料、区域自动站加密观测资料、GFS 0.5°×0.5°逐6 h分析场数据,以及多普勒雷达、风廓线、微波辐射计探测资料,对2014年7月26日浙江盛夏一次强对流天气过程的特征及其成因进行了诊断分析,结果表明:此次过程发生在副热带高压边缘,由于高空槽东移过程中带来了弱冷空气的渗透,并有大量不稳定能量积聚,形成了午后"上干冷、下暖湿"这样有利于强对流发生的不稳定层结条件和环境背景场。当低层925 hPa的中尺度辐合线和对流层中层700 hPa的垂直上升运动区相重合时,中尺度辐合线附近在未来6 h内产生了强对流,这对强对流的发生发展具有一定的预报指示意义。宁波中尺度辐合线是由偏南风和东北风辐合而成,同时受沿海和喇叭口地形影响,该辐合线早已存在,之后触发了宁波地区的强对流天气。杭州中尺度辐合线是由于宁波雷暴的地面出流增强了偏东风气流,从而加强了偏东风与环境东北风的辐合,导致了杭州中尺度辐合线的形成,随后在辐合线附近出现了剧烈的对流天气。     

干侵入对我国东部一次强飑线过程的作用分析

利用NCEP/NCAR再分析资料、雷达资料、FY2E卫星资料等,对2014年7月30日至31日发生在我国东部的一次强飑线天气过程进行综合分析,并着重分析了干侵入对此次飑线过程的作用。结果表明：中层阶梯槽引导高层干冷空气向下入侵后叠加在低层暖湿气流之上,增强了大气不稳定,不稳定能量累积;低空切变线促使不稳定能量释放,是此次飑线的重要触发机制。对干侵入的分析结果表明：此次飑线过程中,干侵入来源于高空槽后下沉气流,干侵入底部风场调整使得飑线在移动过程中发生了转向。在飑线发展过程中,干侵入范围扩大、强度增强;干侵入使飑线发生区域上空空气变冷、变干,增强了大气不稳定。干侵入底部的低相当位温空气与飑线内部高相当位温空气混合是飑线长时间维持的重要原因。     

我国砂岩型铀矿分带特征研究现状及存在问题

作为一种重要的国家战略资源,砂岩型铀矿床是当今世界上最重要的铀矿床类型之一。本文详细地介绍了砂岩型铀矿在国内外的分布特征及占比情况,并对外生地质作用矿床类型中表生流体作用形成的层间渗透砂岩型和潜水渗透砂岩型铀矿床进行了讨论,发现层间渗透砂岩型铀矿床在外表颜色、矿物组合以及地球化学等方面均具有明显的氧化-还原分带现象,此外,矿床内部还具有细菌分带现象。颜色分带在氧化带、氧化-还原过渡带以及还原带之间具有明显不同的特征;矿物组合在不同分带之间各不相同;地球化学分带表现为U、TOC含量以及Fe~(2+)/Fe~(3+)、Th/U比值在各分带之间差异较大。此外,硫酸盐还原菌、硫杆菌、铁细菌及硝化菌等细菌在不同分带之间的数量相差悬殊,而且硫酸盐还原菌数量与TOC呈明显正相关性。通过矿化带内的碳、硫同位素分析,发现硫酸盐还原菌参与了成矿过程,推测其可能是导致碳、硫同位素分馏的主要因素。总体来看,颜色分带、矿物分带、地球化学分带以及细菌分带均与氧化-还原分带呈耦合关系。本文通过总结层间渗透砂岩型和潜水渗透砂岩型铀矿床的成矿模式和当前分带研究中存在的问题,提出了由细菌、地球化学反应参与的砂岩型铀矿床成矿机理,以及未来亟需解决的若干关键科学问题。典型砂岩型铀矿床的分带现象在物、化、探、遥等领域的异常响应对寻找砂岩型铀矿床具有重要的指导意义。     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.