A study of a matching pixel by pixel (MPP) algorithm to establish an empirical model of water quality mapping,as based on unmanned aerial vehicle (UAV) images

Linear regression models are a popular choice for the relationships between water quality parameters and bands (or band ratios) of remote sensing data. However, this research regards the phenomena of mixed pixels, specular reflection, and water fluidity as the challenges to establish a robust regression model. Based on the data of measurements in situ and remote sensing data, this study presents an enumeration-based algorithm, called matching pixel by pixel (MPP), and tests its performance in an empirical model of water quality mapping. Four small reservoirs, which cover a mere several hundred-thousand m², in Kinmen, Taiwan, are selected as the study sites. The multispectral sensors, carried on an unmanned aerial vehicle (UAV), are adopted to acquire remote sensing data regarding water quality parameters, including chlorophyll-a (Chl-a), Secchi disk depth (SDD), and turbidity in the reservoirs. The experimental results indicate that, while MPP can reduce the influence of specular reflection on regression model establishment, specular reflection does hamper the correction of thematic map production. Due to water fluidity, sampling in situ should be followed by UAV imaging as soon as possible. Excluding turbidity, the obtained estimation accuracy can satisfy the national standard.     

地震活动中地壳深部流体的作用研究进展

综述了地震深部流体研究的进展并提出了在地震领域应该深入研究的方面。已有大量资料表明岩石圈是一含流体的系统，也是地震发育的主要场所。深部流体赋存相态，运移方式及其与岩石的反应，对震源介质和构造活动有重要影响。     

深部物质运动的气体地球化学特征

根据氦同位素地球化学资料讨论了中国东部和云南腾冲地区上地幔的脱气。尽管地球脱气作用主要发生在地球形成时的十亿年间，但是后期的脱气作用仍是影响大气圈演化的主要因素。在两种力学性质不同的构造带──中国东部大陆裂谷和位于欧亚板块与印度板块缝合带的腾冲火山区，采集了天然气样，并分析了气体组分和氦同位素组成，较高的３Ｈｅ／４Ｈｅ值和地质、地球物理资料表明天然气和温泉气中的氦相当一部分是来自上地幔。来自上地幔的氦和其他气体自第三纪以来不断在气藏中聚集或向大气中逃逸。伴有源于上地幔的岩浆活动的地幔脱气是深部物质运动的具体表现形式，它对新生代气候演变可能有直接影响。     

黑水─泉州地学断面东段深部温度与岩石层厚度

应用地震波速度与岩石放射性生热率之间的实验关系,结合地表岩石生热率的测试,对黑水─泉州地学断面东段１８条一维地震剖面上的热源垂向分布进行了评估．在此基础上,建立了一维和二维稳态热传导模型．根据干玄武岩固相线公式,估算了上地幔介质部分熔融开始的深度（＂热＂岩石层厚度）．模型显示出深部温度场沿断面方向侧向变化显著．莫霍界面温度在４００－７００℃间变化,相应的＂热＂岩石层厚度为７５－２０５ｋｍ．一维和二维温度模型的差异主要表现在侧向热传递显著的下地壳和上地幔中．温度场的变化与造山带的形成年代或后期叠加构造热事件的年龄有关．     

Analysis of Wave Height in Front of a Wave Absorbing Structure with Rubble Foundation

Wave absorbing structures have been widely applied in many countries. In the present paper, the wave heights in front of a vertical wave absorbing structure with rubble foundation as well as in the wave chamber of the structure are analysed using an approximative calculation method, and the dissipating effect of the structure is verified. On the basis of the results of regular waves, the relative wave heights of irregular waves in front of the wave absorbing structure as well as in the chamber have also been analysed.     

Calculation of Wave Reflection Coefficient for Perforated-Pipe Breakwater

The hollow-pipe perforated breakwater is of low reflection. In this paper the functions of reflection coefficients of both regular and random waves are theoretically derived, based on the concept of linear superimposition of reflected and incident waves and with the total flow rate continuity of integral form instead of the non-continuity of the boundary condition, and based on the concept of linear wave spectrum theory. Comparisons between theoretical results presented here and measurements of model tests show reasonable agreement.     

Strategies for waveform processing in sparker data

A sparker is a marine seismic impulsive source used for high-resolution seismic surveys. Sparker sources were very popular during the late 1960s and 1970s before being supplanted by small volume airguns. However, in the last 10 years there has been renewed interest in sparker technology because (1) it can be easily deployed at relatively low costs and (2) in certain areas the use of small airguns is restricted for environmental purposes. In this study a sparker source was used to assess the seismic stratigraphy of Quaternary deposits and to image the sediment/bedrock interface. Three different inverse filtering methods were tested (i.e., spiking deconvolution, match-filtering and vertical seismic profile (VSP) deconvolution) to correct the poor shot-to-shot repeatability of the source and to compress its reverberations. Results show that the matched-filter and VSP deconvolution methods, which design and apply one operator for each shot, produced comparable results, whereas the spiking deconvolution that used the same operator on all traces failed to compress the source signature properly.     

赤道深层射流对深层浮力源响应解之特征的分析

基于赤道深层射流动力模型，研究赤道深层射流对深层浮力源的响应特征，指出线性、连续层化海洋中浮力源驱动下的单一垂直模态建立深层环流的过程等介于线性浅水系统中深水源驱动的深层环流的建立过程。分析赤道深层射流对深层浮力源响应解的某些特征，结果表明，在给定确定波数量值的诸参数下，浮力源在纬向上范围的大小对赤道深层的射流     

Wave kinematics of partial reflection from a vertical wall

A third-order perturbation approximation for the partial reflection from a vertical wall is presented in this paper. The wave parameters are expressed in terms of the amplitude of incident waves. The reflection coefficient is defined as the ratio of the height of reflected waves to incident waves. The numerical results demonstrate the significant influences of reflected coefficient on the wave profile and wave frequency bifurcation. For example, the critical angle of wave frequency bifurcation with partial reflection is about 7.5 degrees, not 21 degrees as reported previously for fully reflection.     

A two-point method for estimating wave reflection over a sloping beach

This work presents a frequency-domain method for estimating incident and reflected waves when normally incident waves’ propagating over a sloping beach in a wave flume is considered. Linear wave shoaling is applied to determine changes of the wave amplitude and phase due to variations of the bathymetry. The wave reflection coefficient is estimated using wave heights measured at two fixed wave gauges with a distance. The present model demonstrates a high capacity of estimating reflection and shoaling coefficients from synthetic wave-amplitude data. Sensitivity tests for the present model due to measurement errors of wave amplitudes and distance of two probes can more accurately predict the reflection coefficients. The measurement error of wave amplitude affects more significantly than measurement error of distance of two probes on calculating reflection coefficient of waves over a sloping bed.