Macro- and megafauna communities in three deep basins of the South-East Atlantic

During ‘Meteor’ expedition ‘DIVA 2’ in 2005 the abyssal macro- and megafauna communities were studied in the northern Cape Basin, in the northern Angola Basin and in the eastern and western Guinea Basin. Water depths varied between 5040 and 5670 m.Surface deposit feeding or predatory ophiuroids dominated the megafaunal community in the northern Cape Basin, sponges, sipunculids and fish in the northern Angola Basin, and asteroids, crustaceans and fish in the eastern Guinea Basin, while in the western Guinea Basin sipunculids dominated.In the northern Cape Basin, peracarid crustaceans were the dominant macrofaunal group, followed by polychaetes and bivalves. In the Guinea Basin, polychaetes, peracarid crustaceans and bivalves dominated, although omnivorous or predatory free-living nematodes of macrofaunal size (>0.5 mm) made up 40–60% of the total abundance, with maxima in the western basin.The chlorophyll a content of sediments was lower in the northern Cape and Angola Basins than in the Guinea Basin, which was consistent with the differences in water masses, primary production and flux rate of organic matter in the three basins of the South-East Atlantic. The differences in structure and function of the macro- and megafauna communities in the three basins correlated with the differences in the amount of food reaching the seafloor in tropical and subtropical settings.     

Comparative performances of two- and three-dimensional analyses of soil-cement mixing columns under an embankment load

Abstract

This research presents measurements and simulations of the full-scale behavior of a test embankment built on a soft marine clay deposit improved using soil–cement mixing (SCM) columns in Bangkok, Thailand, using both two-dimensional (2D) and 3D finite element analyses (FEAs). Fixed SCM columns with two different installation patterns, that is, column groups and column rows, were constructed in the soft clay foundation prior to the construction of the embankment. Three column wall methods, namely, equivalent width, equivalent axial rigidity, and equivalent flexural rigidity approaches, were used to convert the 3D individual columns into 2D plane strain column walls. A comparison of the results obtained through the 3D and 2D FEAs revealed that the 2D analyses provide inaccurate results in terms of the column lateral movements, bending moments, and axial loads induced in the SCM columns in addition to the factors of safety against slope failure. This outcome occurred because the actual columns in the 2D FEA were modeled using extended walls, which essentially prevent the movements of soil between two columns or column rows. Correction factors used to convert the 2D analysis results into 3D analysis results were also proposed in this study.     

基于.NET反射技术的插件式GIS软件设计原理与实现

当前主流的GIS软件开发方式--组件式开发已难以适应日益复杂多变的GIS应用需求,尤其表现在GIS应用软件的扩展和维护方面.该文在分析当前流行的插件技术的基础上,给出在.NET 平台上开发插件式GIS应用软件的一种有效解决方案,运用该技术设计了一款插件式GIS软件:DotMap Desktop,通过整合一些开源GIS组件能够完成常见的GIS任务且具有良好的扩展性.采用该方案设计的插件式GIS软件能够方便地运行在各种主流的操作系统上.     

Crustal wide-angle reflection imaging along Lianxian-Gangkou profile in Guangdong province,China

A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection (from crystalline basement and Moho) pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.     

Deriving depths of deep chlorophyll maximum and water inherent optical properties: A regional model

The Bohai Sea is a semi-enclosed inland sea with case-2 waters near the coast. A comprehensive set of optical data was collected during three cruises in June, August, and September 2005 in the Bohai Sea. The vertical profile measurements, such as chlorophyll concentration, water turbidity, downwelling irradiance, and diffuse attenuation coefficient, showed that the Bohai Sea was vertically stratified with a relative clear upper layer superimposed on a turbid lower layer. The upper layer was found to correspond to the euphotic zone and the deep chlorophyll maximum (DCM) occurs at the base of this layer. By tuning a semi-analytical model (24 and 25) for the Bohai Sea, we developed a method to derive water inherent optical properties and the depth of DCM from above-surface measurements. Assuming a ‘fake’ bottom in the stratified water, this new method retrieves the ‘fake’ bottom depth, which is highly correlated with the DCM depth. The average relative error between derived and measured values is 33.9% for phytoplankton absorption at 440 nm, 25.6% for colored detrital matter (detritus plus gelbstoff) absorption at 440 nm, and 24.2% for the DCM depth. This modified method can retrieve water inherent optical properties and monitor the depth of DCM in the Bohai Sea, and the method is also applicable to other stratified waters.     

Crustal velocity structures and their tectonic implications in different tectonic block regions of the Chinese mainland

In this paper,the typical velocity structures and average velocities of the crust in six different active tectonic block regions are presented on the basis of previous studies and their tectonic implications are discussed. The results show that different tectonic units have different features of crustal velocity structures. In general,there are low velocity distributions in the crust in regions with strong tectonic activities,and the scales of low velocity distributions are related to the tectonic activitie...     

中国大陆下扬子及邻区地壳结构基本特征：深地震测深研究综述

The Deep Seismic Sounding( DSS) projects carried out from the 1970 s in the lower Yangtze region and its neighboring area were reviewed in this paper,then the basic wave group features of those wide angle reflection / refraction record sections,and of the crustal structure are summarized. It shows that there were in total five clear wave groups on the record sections,which include the first arrival Pg,the reflection P1 from the bottom interface of the upper crust,the reflection P3 from the bottom interface of the middle crust,the strong reflection Pm from the Moho boundary,and the refraction Pn from uppermost mantle. In general,these phases are easily consistently traced and compared,despite some first arrivals being delayed or arriving earlier than normal due to the shallow sedimentary cover or bedrocks. In particular,in the Dabie Mountain region the seismic events of a few gathered shots always have weak reflection energy,are twisted,or exhibit disorganized waveforms, which could be attributed to the disruption variations of reflection depth,the broken Moho,and the discontinuity of the reflection boundary within crust. The regional crustal structures are composed of the upper,middle and lower crust,of which the middle and lower layers can be divided into two weak reflection ones. The crustal thickness of the North China and Yangtze platform are 30km- 36 km,and the Moho exhibits a flat geometry despite some local uplifts. The average pressure velocity in lower crust beneath this two tectonic area is 6. 7 ± 0. 3km / s. Nevertheless,beneath the Dabieshan area the crustal thickness is 32km- 41 km,the Moho bends down sharply andtakes an abrupt 4km- 7km dislocation in the vertical direction. The average pressure velocity in the lower crust beneath the Dabieshan area is 6. 8 ± 0. 2km / s.     

龙门山中央断裂南段盐井—五龙断裂的浅层地球物理方法探测

在2008年5月12日汶川MS8.0地震和2013年4月20日芦山MS7.0地震中,龙门山中央断裂南段的盐井—五龙断裂均未发现地表破裂现象,加之该断裂浅层地球物理资料极度匮乏,在一定程度上限制了对龙门山断裂带南段地震危险性的评价和发震能力的评估。针对龙门山中央断裂南段的盐井-五龙断裂经过区段的主要乡(镇)所在地多为宽度不大于300m的山间峡谷地区,且探测场区存在交通条件不便、场地工作面狭窄等问题,在浅层地震反射波法探测工作中采用小道间距、小偏移距、多道短排列接收和共反射点多次覆盖观测的地震数据采集方式,并经数据处理后获得地震反射剖面图像。浅层地震探测定位结果结合高密度电阻率成像断面、探槽开挖和钻孔联合剖面资料,共同揭示了NE向的盐井—五龙断裂在宝兴县五龙乡东风村一带精确的空间展布位置、产状规模和近地表构造形态。探测结果表明盐井—五龙断裂于五龙乡北东风村西河两岸的T1阶地处隐伏通过,性质为倾向NW的逆冲断裂,近地表倾角50°~60°,上断点埋深19m。该断裂断错宝兴西河T2、T3阶地,西河右岸T1阶地断裂通过处两侧基岩的断距6~8 m,其破碎带及其影响带宽度约30m。本文浅层地球物理探测成果可对判定盐井—五龙断裂的近地表构造活动提供可靠的地震学证据,也为地震重灾区(宝兴县城)的灾后工程选址重建、地震危险性评价和制定抗震防灾规划提供了科学的基础资料。     

纵横波弹性阻抗联合反演方法

在弹性阻抗反演方法的基础上,充分利用纵波和转换波地震信息,开展了纵横波弹性阻抗联合反演方法研究。首先对转换波反射系数近似精度进行对比分析,选取了转换波弹性阻抗近似公式,并对选取的转换波弹性阻抗公式进行标准化处理;其次详细研究了该反演算法的基本原理,并提出了具体实现流程;最后分别利用二维模型和实际工区的井数据制作叠前角度道集,添加随机噪声,对该反演方法进行模型试算。结果表明,纵横波弹性阻抗联合反演所得纵波速度、横波速度及密度估测值与真实值之间吻合较好;而且与单纯纵波弹性阻抗反演结果相比,纵横波弹性阻抗联合反演所得密度估测值更加稳定,从而为准确储层识别和流体检测提供了可靠的依据。     

鄂尔多斯盆地北部深埋区“地貌—沉积”控水关键要素研究

鄂尔多斯盆地北部深埋煤田区地表主要有沙漠、基岩台地和黄土沟壑等地貌类型,沙漠区工作面涌水量比其他地貌区大1~2个数量级。为了查清煤层顶板直接充水含水层补给水源、导水通道和充水强度的控制要素,从地形地貌和地质沉积方面开展了研究,结果表明:沙漠地貌地势平缓,降水入渗系数大,第四系厚度大、富水性强,为下伏含水层提供了丰富的补给水源;基岩台地和黄土沟壑地貌,地形起伏大,降水入渗系数极小,浅部地层富水性极弱,是下伏含水层补给能力较弱的水源。陆相沉积形成的砂泥岩互层结构,不存在区域性稳定隔水层,各层段均属于弱-中等富水性含水层,3个矿井的白垩系含水层水位下降了20~130 m,证明浅部与深部含水层存在较密切的水力联系。煤层顶板主要发育七里镇砂岩和真武洞砂岩含水层,为厚度较大的中粗砂岩段,直接充水含水层地质沉积条件相似,但是沙漠区工作面顶板钻孔水量、累计预疏放水量和采空区涌水量均远大于其他地貌区,直接充水含水层富水性主要受地貌控制,深部含水层的水源为大气降水和第四系含水层。沙漠地貌区的不同矿井,工作面顶板钻孔水量、累计预疏放水量、采空区涌水量也存在较大差异,该差异与直接充水含水层厚度和岩性等有关,反映了地质沉积条件也是控制含水层富水性的重要因素。地形地貌和地质沉积是控制直接充水含水层富水性和工作面涌水量的关键要素。