Geochemical fractionation of Ni,Cu and Pb in the deep sea sediments from the Central Indian Ocean Basin: An insight into the mechanism of metal enrichment in sediment

Metal speciation study in combination with major element chemistry of deep sea sediments provided possible metal enrichment pathways in sediments collected from environmentally different locations of Central Indian Ocean Basin (CIB). Metal speciation study suggests that Fe–Mn oxyhydroxide phase was the major binding phase for Ni, Cu and Pb in the sediments. The second highest concentrations of all these metals were present within the structure of the sediments. Easily reducible oxide phase (within the Fe–Mn oxyhydroxide binding phases) was the major host for all the three metals in the studied sediments. Major element chemistry of these sediments revealed that there was an increased tendency of Cu and Ni to get incorporated into the deep sea sediment via the non-terrigenous Mn-oxyhydroxide fraction, whereas, Pb gets incorporated mostly via amorphous Fe-hydroxides into the sediment from the CIB. This is the first attempt to provide an insight into the mechanism of metal enrichment in sediment that host vast manganese nodule.     

郯庐断裂带张八岭隆起段晚中生代岩浆岩继承锆石U-Pb年代学:源区属性及构造意义

大别与苏鲁造山带之间的郯庐断裂带张八岭隆起段,构成了华北与扬子板块之间的断裂边界。该边界带的深部结构状态长期以来存在着不同的认识。本文利用张八岭隆起带沿线出露的晚中生代岩浆岩中继承锆石U-Pb年代学信息,结合地球物理资料及Nd、Pb、Hf同位素资料,分析了其深部的岩浆源区属性及结构状态。张八岭隆起带北段晚中生代岩浆岩继承锆石年龄以1.9~2.7Ga为主,最大峰值年龄为2.5Ga;南段继承锆石年龄以2.2~2.6Ga为主,峰值年龄也为2.5Ga;郯庐断裂带庐江段则以含大量新元古代锆石为特征,在0.7Ga形成显著的分布峰值,并有早元古和少量太古代年龄信息。分析结果表明,张八岭隆起带北段的晚中生代岩浆岩源区为华北下地壳,南段的源区兼有华北和扬子陆壳的信息,而更南部庐江段则以扬子地壳源区为特征。电法剖面揭示,郯庐断裂主边界在张八岭隆起带下向南东倾斜,从而深部存在华北地壳;而南部庐江段转变为向北西陡倾,从而深部皆为扬子地壳。郯庐断裂深部产状特征支持其印支期应为斜向汇聚边界。而其中三叠纪继承锆石的缺失指示隆起带上变质岩应为原地岩石,而非来自大别造山带。     

桩锚支护深基坑施工过程变形特征分析

以济南市某大型深基坑工程为依托,通过FLAC3D对深基坑工程不同施工阶段的变形特性进行了数值计算分析;桩锚支护深基坑,地表最大竖向变行产生在距离基坑边缘10 m位置处,且最大竖向变形量为46.16 mm;最大水平位移发生在桩顶冠梁位置处,最大水平位移为53.45 mm,是基坑支护最薄弱环节,基坑呈现三角形状向内侧滑动的趋势。     

Analysis of soil nail walls performance - Case study

This study surveys the performance of temporary soil nail walls with a maximum height of 29.3 m in the Yas project, located in Tehran. Some numerical models, with various modelling approaches, were developed using finite element software and the proper modelling approaches were specified and verified.The modelling results were analysed and compared with the in situ monitored data. The results demonstrate the model’s horizontal deformations are generally greater than the in situ monitored values. To decrease the differences between models and monitored results, the effect of variations of the soil parameters had been surveyed and the limits of needed variations were specified.     

Effect of Groundwater Fluctuations on Pore Pressures and Earth Pressures on Coastal Excavation Retaining Walls

Pore water and earth pressures acting on retaining structures are investigated using an efficient coastal double-layered excavation model to determine offshore excavation responses to groundwater fluctuations outside foundation pits. Total pore water pressure includes excess pore water pressure (due to groundwater fluctuations) and steady pore water pressure (due to steady seepage) determined using one-dimensional consolidation theory of double-layered soil and one-dimensional steady-state flow theory, respectively. Rankine's active and passive earth pressures are obtained from pore water pressure. This method is applicable to arbitrary groundwater fluctuation conditions. How physical parameters affect pore water pressure is numerically investigated using examples, demonstrating the method's practicality for calculating pore water and earth pressures.     

松辽盆地大陆深部科学钻探2号井完井暨学术研讨现场会召开

正2018年5月26日,自然资源部中国地质调查局在黑龙江省安达市松科二井工程现场召开大陆科学钻探工程(松科二井)完井暨学术研讨现场会。中国地质学会常务副理事长兼秘书长、自然资源部中国地质调查局副局长、松科二井工程领导小组组长李金发宣布松辽盆地大陆深部科学钻探工     

华北地块中部新构造运动

由于印度板块持续向北运动,引起青藏高原的挤出,并于中新世末引起华北地块的向东挤出。大约在7.3 Ma,太行山西侧渭河盆地唐县面首先解体,继而向北、向东发展;到5 Ma左右,太行山东麓断裂带的右行走滑,导致华北中部唐县面全面解体,形成多个太行山内部山间盆地,以及太行山西侧山西地堑系。这些断陷盆地的断陷幅度各不相同,太行山西侧山西地堑系断陷幅度较大,太行山内部山间盆地断陷幅度较小,太行山东部的渤海湾盆地断陷活动不明显。伴随着盆地的形成,太行山相对进入快速隆升阶段。山西地堑系控盆断裂以及太行山东麓断裂带第四纪以来仍存在明显活动,切割并控制第四系,局部在地表形成地裂缝。华北地块中部的应力场恢复以及深部构造分析表明,深部地幔上涌对浅部伸展构造的形成具有重要的影响,深部构造演变与浅部构造演变具有高度的一致性和耦合性。太行山东部渤海湾盆地自中新世以来就进入拗陷阶段,断裂活动弱,构造演化与西侧差异较大,表明这期构造运动动力源于西侧,太行山东麓断裂带作为两侧差异演变的边界,调节着两侧的差异构造活动。     

基于岩石图像深度学习的岩性自动识别与分类方法

岩石岩性的识别与分类对于地质分析极为重要,采用机器学习的方法建立识别模型进行自动分类是一条新的途径。基于Inception-v3深度卷积神经网络模型,建立了岩石图像集分析的深度学习迁移模型,运用迁移学习方法实现了岩石岩性的自动识别与分类。采用此方法对所采集的173张花岗岩图像、152张千枚岩图像和246张角砾岩图像进行了学习和识别分类研究,通过训练学习建立岩石图像深度学习迁移模型,并分别采用训练集和测试集中的岩石图像对模型进行了检验分析。对于训练集中的岩石图像,每组岩石分别用3张图像测试,三种岩石的岩性分类均正确,且分类概率值均达到90%以上,显示了模型良好的鲁棒性;对于测试集中的岩石图像,每组岩石分别采用9张图像进行识别分析,三种岩石的岩性分类均正确,并且千枚岩组图像分类概率均高于90%,但是花岗岩组2张图像和角砾岩组的1张图像分类概率值不足70%,概率值较其他岩石图像低,推测其原因是训练集中相同模式的岩石图像较少,导致模型的泛化能力减小。为了提高识别精确度,对准确率较低的岩石图像进行截取,分别取其中的3张图像加入训练集进行再训练,增加与测试图像具有相同模式的训练样本;在新的模型中,对3张图像进行二次检验,测试概率值均达到85%以上,说明在数据足够的状况下模型具有良好的学习能力。与传统的机器学习方法相比,所提出的岩石图像深度学习方法具有以下优点:第一,模型通过搜索图像像素点提取物体特征,不需要手动提取待分类物体特征;第二,对于图像像素大小,成像距离及光照要求低;第三,采用适当的训练集可获得较好的识别分类效果,并具有良好鲁棒性和泛化能力。     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

Numerical modelling of deep sea air-lift

Deep sea air-lifting of solid particles from depth of 1600 m is simulated with a mathematical model of the three-phase flow in an upward pipe. The computations are carried out for an axisymmetric domain in a transient way. Phase distributions, pressure and velocity profiles together with flow rates for all phases are presented and analysed. The influence of the pipe diameter on the air-lift efficiency was studied for air-lift pipes of different lengths and found to be significant. The lifting efficiency increases with the increase of the pipe diameter due to the reduction of the wall friction influence on the flow. In addition, the efficiency also increases with the increase of the solid particles volume fraction at the inlet. The presented numerical model can be utilized during various stages of the design of the air-lift pumps to help answer fundamental questions on the process, and during their operation to select optimal process parameters and to address possible problems.