福州江滨地区超高层建筑灌注桩成孔工艺分析

以福州江滨地区2个有代表性的超高层建筑桩基础工程实例为依据,通过无卡式冲击 正循环,旋挖 气举反循环,回转 泵吸反循环3种成孔工艺之间的比对,提出了在福州市江滨地区超大粒径厚层卵石与花岗岩地层灌注桩施工成孔工艺方面的一些见解,认为回转 泵吸反循环是较为可靠的工艺。     

Development of a hybrid simulation controller for full‐scale experimental investigation of seismic retrofits for soft‐story woodframe buildings

Hybrid simulations of a full‐scale soft‐story woodframe building specimen with various retrofits were carried out as part of the Network for Earthquake Engineering Simulation Research project – NEES‐Soft: seismic risk reduction for soft‐story woodframe buildings. The test structure in the hybrid simulation was a three‐story woodframe building that was divided into a numerical substructure of the first story with various retrofits and a full‐scale physical substructure of the upper two stories. Four long‐stroke actuators, two at the second floor and two at the roof diaphragm, were attached to the physical substructure to impose the simulated seismic responses including both translation and in‐plane rotation. Challenges associated with this first implementation of a full‐scale hybrid simulation on a woodframe building were identified. This paper presents the development and validation of a scalable and robust hybrid simulation controller for efficient test site deployment. The development consisted of three incremental validation phases ranging from small‐scale, mid‐scale, to full‐scale tests conducted at three laboratories. Experimental setup, procedure, and results of each phase of the controller development are discussed, demonstrating the effectiveness and efficiency of the incremental controller development approach for large‐scale hybrid simulation programs with complex test setup. Copyright © 2016 John Wiley & Sons, Ltd.     

汶川地震(Ms8.0）地表建筑体变形特征及其构造意义

通过汶川地震震区大量的实地考察已证实沿着早先活动断裂主要发育了两条地表破裂带：一条是沿着映秀－北川断裂产生的逆冲伴随右旋走滑破裂带,长275km,最大垂直位移达11m,水平位移达12m; 另一条纯逆冲性质的破裂带,沿着灌县－安县断裂发育,最大垂直位移达4m。活动断裂之上的地表破裂带是野外工作中确定地震断裂性质的重要现象。另外,在活动断裂相邻区域和远离区域的路面以及建筑体还大量存在变形现象。通常沿活动断裂产生的地表破裂是典型的同震破裂,相邻区域的地表路面及建筑体发育的变形属于次生变形,远离区域发育的变形则属于震后变形。对次生变形和震后变形测量数据的应用容易影响活动断裂特征的确定和性质的判断,因为路面等建筑体上的挤压拱起、叠置以及水平错断等现象多是受到地震过程中通过断裂活动突然释放的巨大能量作用在局部地表建筑体产生的变形。但是,分布广泛的挤压现象暗示了区域上挤压应力场环境,有利于地表同震破裂位置的推测及地震断裂性质的判断。     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

芦山7.0级地震医疗建筑震害与启示

鉴于医疗建筑在防灾救灾中的重要地位和作用,本科考小组对雅安地区医疗建筑在芦山地震中的震害进行了调查,调查包括不同烈度区、不同结构类型和建筑年代、不同级别的医疗卫生机构,对结构构件、非结构构件、医疗设备的震害特征,以及其他影响医疗秩序和使用功能的因素做了阐述和分析,并总结了汶川灾后新建及重建项目的抗震效果.调查表明,雅安地区医疗建筑在建筑结构的抗震安全性及救灾功能的实现方面仍存在很多问题,反映了我国医疗建筑的普遍问题.因此,对医疗建筑的抗震设防,需要作进一步系统的研究.     

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.     

地理国情普查数据支持下的人口空间化方法

针对传统的人口空间化方法存在数据源多、模型复杂、忽视居住建筑类型的影响等问题,提出了一种以居住建筑作为人口分布参考的人口空间化方法。在地理国情普查数据的支持下,文章选取株洲市境内的18个乡镇为研究区。首先,将研究区内的居住建筑重分类为多层房屋、低矮房屋和废弃房屋,采用最小二乘法求算各类居住建筑的居住密度。然后,根据各乡镇人口估计值的相对误差对各乡镇各类居住建筑的居住密度进行修正。最后,运用GIS的叠加分析技术得到250m格网人口密度图。检验结果表明,人口估计值与人口统计值的线性拟合斜率为0.965,另外基于居住建筑重分类的人口空间化方法使得人口估计精度较未重分类时有了明显提高。     

半自动机载LiDAR点云建筑物三维重建方法

针对全自动建筑物3D重建存在需要后续人工检验,且发现重建错误需要花费额外时间修改的问题,提出了一种半自动的面向对象的机载LiDAR点云建筑物3D重建方法。基于建筑物类别点云的联通分析和平面生长分割结果,提出了自动的建筑物栋数检测、单栋建筑物外轮廓提取、单栋建筑物内部结构线提取方法;同时,在计算机无法完成部分工作时,人工辅助计算机完成高程阶越线提取、识别建筑物屋顶附属物点云等工作。实验证明,该方法可以适用于高密度机载LiDAR点云数据中城区大部分建筑物的3D模型重建。     

1D System identification of a 54‐story steel frame building by seismic interferometry

A 54‐story steel, perimeter‐frame building in downtown Los Angeles, California, is identified by a wave method using records of the Northridge earthquake of 1994 (M_L = 6.4, R = 32 km). The building is represented as a layered shear beam and a torsional shaft, characterized by the corresponding velocities of vertically propagating waves through the structure. The previously introduced waveform inversion algorithm is applied, which fits in the least squares sense pulses in low‐pass filtered impulse response functions computed at different stories. This paper demonstrates that layered shear beam and torsional shaft models are valid for this building, within bands that include the first five modes of vibration for each of the North–South (NS), East–West (EW), and torsional responses (0–1.7 Hz for NS and EW, and 0–3.5 Hz for the torsional response). The observed pulse travel time from ground floor to penthouse level is τ ≈1.5 s for NS and EW and τ ≈ 0.9 s for the torsional responses. The identified equivalent uniform shear beam wave velocities are β_eq ≈ 140 m/s for NS and EW responses, and 260 m/s for torsion, and the apparent Q ≈ 25 for the NS and torsional, and ≈14 for the EW response. Across the layers, the wave velocity varied 90–170 m/s for the NS, 80–180 m/s for the EW, and 170–350 m/s for the torsional responses. The identification method is intended for use in structural health monitoring. Copyright © 2013 John Wiley & Sons, Ltd.     

考虑震害因子耦合作用的砌体建筑群破坏概率模型研究

砌体建筑群在地震中往往破坏严重损失巨大,合理评估地震作用对不同种类砌体结构造成破坏的风险变得至关重要。传统基于后验概率的地震危险性分析方法忽略了砌体建筑个体差异性的影响,未深入考虑多种震害因子的耦合作用。本文以华南地区砌体建筑群为例,开发了一种集成概率方法来对城市砌体结构的破坏风险进行建模,考虑建筑年代、层数、使用用途和墙厚四类震害因子的耦合影响,采用(Kolmogorov-Smirnov)K-S检验,在设定地震动参数下选取Gaussian分布、Log-Normal分布、Gumbel分布和Beta分布四种概率分布对该地区砌体建筑物的破坏状态概率分布参数进行拟合。通过均方根误差(Root Mean Square Error)RMSE进行拟合优度评价,最终建立基于Gaussian分布和Log-Normal分布的砌体建筑物破坏联合概率模型。最后,以华南地区三个城市典型砌体建筑物为例进行实例对比验证,将基于本文建立的建筑破坏概率模型推算出的砌体建筑群震害矩阵与基于单体结构分析得到的震害矩阵进行对比,与理论值最大偏差为0.033 3。研究表明：本文构建的集成概率方法能够获得更加合理的城市砌体建筑...