湖北蕲春花岗岩类锆石SHRIMP年龄：大别山造山带内弱变质—未变质晋宁期花岗岩类的发现

蕲春花岗质杂岩体包括斑状二长花岗岩和花岗岩两部分,它们之间在化学性质上存在着很大的差异,前者表现为高Al 2O3(15.73%)、相对高CaO(2.46%)、Na2O含量明显高于K2O(Na2O/K2O=1.27),尤以强烈亏损重稀土元素和极强的轻、重稀土元素分馏程度[(La/Yb)N=46.8]为特征而类似于太古宙高Al2O3的TTG岩石.而后者则以较低的Al2O3含量(14.05%)、贫CaO(0.82%)、K2O含量明显高于Na2O(Na2O/K2O=0.81)为特征,轻、重稀土元素的分馏程度[(La/Yb)N=10.89]也较片麻状二长花岗岩中弱得多.两类岩石中锆石的U-PbSHRIMP年龄分别为824.6±17.6 Ma和784±20 Ma,该时代与大别山造山带内花岗片麻岩的原岩形成年龄类似.大别山造山带内弱变质-未变质晋宁期花岗岩的出现表明扬子板块印支期向北俯冲时,该花岗质杂岩处于俯冲板片的后缘,可代表造山带内扬子基底的原地露头.而岩体周围的高压变质杂岩应是折返上来的无根构造岩片,大别山造山带内高压超高压变质杂岩的出露不是整体性抬升剥蚀的结果.     

Timing and geochemical characters of the Sanchazi magmatic arc in Mianlüe tectonic zone, South Qinling

The Sanchazi mafic-ultramafic complex in Mianlue tectonic zone, South Qinling can be subdivided into two blocks, i.e. Sanchazi paleo-magmatic arc and Zhuangkegou paleo-oceanic crust fragment (ophiolite). The Sanchazi paleo-magmatic arc is mainly composed of andesite, basaltic and basalt-andesitic gabbro (or diorite), andesitic dyke, plagiogranite and minor ultramafic rocks, which have typical geochemical features of island arc volcanic rocks, such as high field strength element (e.g. Nb, Ti) depletions and lower Cr, Ni contents. The Light rare earth element (LREE) and K enrichments of these rocks and zircon xenocrystals of 900 Ma from plagiogranite suggest that this magmatic arc was developed on the South active continental margin of the South Qinling micro-continent. The U-Pb age of (300 ± 61)Ma for zircons from plagiogranite indicates that the Mianlue paleo-oceanic crust was probably subducted underneath the South Qinling micro-continent in Carboniferous. This is consistent with the formation time (309Ma) of the Huwan eclogite originating from oceanic subduction in Dabie Mountains, suggesting that the Mianlue paleo-ocean probably extended eastward to the Dabie Mountains in Carboniferous. The high-Mg adakitic rocks in Sanchazi paleo-magmatic arc suggest that the subducted oceanic crust was relatively young (＜25Ma) and hot.     

Structural features and petroleum geology of the fold-thrust belt in the southern Tarim basin, China

The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and petroleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the paleo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.     

Change of crustal gravitational potential energy in the Taiwan orogen by the Chi-Chi earthquake sequence

The active convergence between the northwest corner of the Philippine Sea Plate and the southeast margin of the Eurasian Plate has given rise to the Taiwan mountain-building and produced numerous earthquakes. Among the earthquakes, the 1999 Chi-Chi earthquake is the largest one recorded in the century. In this study, we examine the crustal gravitational potential energy (GPE) change in the Taiwan orogen caused by the Chi-Chi earthquake sequence, which was catalogued by the regional broadband seismometer array for a whole year. As a result, we find that the crust was going up and down randomly during the earthquake sequence, but an overall cumulative gain of the crustal GPE, +1.82×10¹⁶ J, was rapidly achieved in 1 month after the main shock. The crustal GPE was nearly still afterwards and reached +1.90×10¹⁶ J in 1 year. Spatially, although the main surface faulting has occurred in western Taiwan, the crustal GPE gain is mainly distributed in central Taiwan at the area where the existing crustal GPE is high and the existing lithospheric GPE is relatively low. The crustal GPE loss by the Chi-Chi earthquake sequence can also be observed and is generally distributed at both sides of the crustal GPE gain area. The crustal GPE gain mainly found in central Taiwan corroborates that the uplift of the Taiwan orogen is principally taking place in central Taiwan, rather than in the more hazardous western Taiwan.     

秦岭造山带岩浆岩地球物理场特征

根据不同类型岩浆岩的岩石密度、磁性的不同,通过重磁异常分离、延拓、求导、异常的彩色编码及重、磁特征信息的复合处理等,按重磁反映的岩浆岩带所处的构造单元部位、岩浆系列特征以及与矿带的时空关系,将秦岭造山带划分为2带和7个群段.     

大别山南部宿松磷矿含磷地层的时代归属与变形特征及其构造评价

根据对大别山南部宿松磷矿含磷地层的区域分布、地层序列、时代归属、构造变形的系统研究,提出磷矿层属震旦系的新认识。含磷岩系经受了两次强烈的变形改造,原始层理经过了强烈改造,宿松磷矿构成总体包络面呈北西西走向、向南倾斜的褶皱化单斜。矿层的多层化、尖灭复合和加厚现象等主要受构造的控制,而非完全受古地形的控制。用褶皱的观点对原先勘探剖面中的磷矿体进行了重新圈连,籍以指导磷矿的调查、评价和开采。最后对磷矿分布的古地理特征进行了讨论,并从构造的观点对磷矿进行了评价。     

大别山太湖地区榴辉岩峰期变质条件与构造意义

大别山太湖地区曾被作为“冷”、“热”榴辉岩带的交界处所在，我们对大别山太湖地区的进行了1：10000地质填图，并详细研究了该地区榴辉岩的岩相学和矿物成分变化，以及KD值、峰期变质P-T条件。研究表明榴辉岩自南向北可分为三类：①朱家冲型榴辉岩；②大坝型榴辉岩；③金河桥型榴辉岩。其中朱家冲型榴辉岩和金河桥型榴辉岩显示出明显的温度、压力差异，它们形成的P-T条件分别为：P=2．14GPa、T=563℃和P=3．76GPa、T=791℃。大坝型榴辉岩的峰期变质P-T条件差别较大，在柯石英-石英相变线附近徘徊，变质环境相当于高压一超高压过渡环境。朱家冲型榴辉岩与大坝型榴辉岩分别对应于前人所划分的“冷”、“热”榴辉岩，并且两者在峰期，变质温、压条件上是连续变化的，没有明显的温、压间断。因此，我们认为本区所谓的“冷”、“热”榴辉岩带界线是不存在的。     

山西五台地区系舟山逆冲推覆构造地质特征

系舟山逆冲推覆构造带位于中生代燕山造山带的西南端，分布于系舟山掀斜向斜的北西翼，形成于晚侏罗世晚期，空间上由一系列近平行排列的逆冲断裂组成，剖面上表现为侧幕展布的犁式逆冲断裂所构成的前陡、后缓的单冲式叠瓦状构造。主体由北西向南东方向逆冲．逆冲扩展方式为前展式，运移距离大于5．8km。推覆构造中应力状态在横、纵向上呈现有规律的变化，根带以挤压为主的高角度逆冲断裂及复杂多级褶皱为主；中带以单剪为主，形成叠瓦状构造；锋带挤压作用增强，发育反冲断层和不对称褶皱。随着挤压应力的松弛减弱，山前形成规模较大的正断层。     

Transformation of garnet epidote amphibolite to eclogite, western Dabie Mountains, China

Omphacite and garnet coronas around amphibole occur in amphibolites in the Hong'an area, western Dabie Mountains, China. These amphibolites consist of an epidote–amphibolite facies assemblage of amphibole, garnet, albite, clinozoisite, paragonite, ilmenite and quartz, which is incompletely overprinted by an eclogite facies assemblage of garnet, omphacite and rutile. Coronas around amphibole can be divided into three types: an omphacite corona; a garnet–omphacite–rutile corona; and, a garnet–omphacite corona with less rutile. Chemographic analysis for local reaction domains in combination with petrographical observations show that reactions Amp + Ab + Pg = Omp +Czo + Qtz + H₂O, and Amp + Ab = Omp ± Czo + Qtz + H₂O may lead to the development of omphacite coronas. The garnet–omphacite–rutile corona was formed from the reaction Amp + Ab + Czo + Ilm ± Qtz = Omp + Grt + Rt + H₂O. In garnet–omphacite coronas, the garnet corona grew during an early stage of epidote amphibolite facies metamorphism, whereas omphacite probably formed by the reactions forming the omphacite corona during the eclogite facies stage. It is estimated that these reactions occurred at 0.8–1.4 GPa and 480–610 °C using the garnet–clinopyroxene thermometer and omphacite barometer in the presence of albite.     

Late-Stage Ductile Deformation in Xiongdian-Suhe HP Metamorphic Unit, North-Western Dabie Shan, Central China

New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shun, central China. The finegrained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet,omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism,are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes.Two late-stages of widely developed, sequential ductile deformations D3 and D4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D3 fabrics are best preserved in the Suhe tract of low post-D3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D4 structures are attributed to the main episode of ductile extension (D^24) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the northductile shearing (D^24) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic(250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinline UHP metamorphic belt formed durin~ the Early Paleozoic (500-400Ma).