规则波作用下台阶地形上墩柱绕流三维数值研究

利用Flow-3D建立三维数值波浪水槽,模拟波浪在不对称台阶地形上的传播。系统研究规则波作用下墩柱周围水流的流动特性,分析墩柱周围的瞬时速度场、涡量场以及KC值变化,不同相位时墩柱前、后水平流速分布情况。结果表明:波浪在台阶地形传播的过程中,墩柱迎水面的涡动结构不够明显;高涡量呈对称状聚集在墩柱的背水面,并形成一对旋转方向相反的涡结构;周期对KC值的影响比波高的影响要明显;墩柱迎水面水平方向流速变化较大,侧面水平流速变化最为剧烈,背面由于受到墩柱的掩护作用水平方向流速变化不大,在墩柱的正面和侧面竖向环流明显。     

Implementation of baroclinic terms in a three-dimensional hydrodynamic model and its application to Anzali Port, Iran

Baroclinic terms have been implemented in a three-dimensional fully hydrodynamic model developed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] modifying its momentum equations to account for density gradients and utilizing the scalar (salinity, temperature, etc.) conservation equation (SCE) and a state equation for the calculation of density. In the solution of advection-diffusion terms of the governing Navier-Stokes equations (NSE) and SCE, a symmetric splitting method was applied to ensure the long-term stability of simulations. Correction terms proposed by Ruddic et al. (1995) were applied to SCE to ensure the conservation of the scalar quantity. In the presence of baroclinic terms, the zero gradient pressure in the vertical direction in the vicinity of surface and bottom boundaries assumed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] created spurious currents. This problem was solved by assuming a hydrostatic pressure variation at those boundaries. The ability of extended model was validated by comparing its results with an experimental test case. The simulation of hydrodynamic and salt intrusion at Anzali Port located at the southern coasts of Caspian Sea in Iran was carried out by the model with both barotropic and baroclinic modes. The simulated results with baroclinic mode show a better agreement with measured data as compared to the results of barotropic mode that clearly demonstrate the significance of baroclinic terms in the simulation of cyclic intrusion of salt wedge into the Port Basin.     

A comparison of economic performance in the fisheries sector: A short- and long-term perspective

Indicators of the economic performance of fishing vessels are frequently computed in various countries. In this paper, we use different types of information to assess capital value and the economic performance of fishing vessels. On the one hand, field surveys provide technical and financial information on the main components of fishing capital. On the other hand, book values are given in bookkeeping databases. We use both sources of information on fishing capital are used for the same set of vessels, namely the commercial fishing fleet of the French region of Brittany. Based on these two sources, measures of economic performance can be produced for the short term using gross surplus; and for the long term including the cost of capital. The measures of performance obtained are presented and the differences between them are then discussed.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

面向目标自适应三维大地电磁正演模拟

本文将面向目标的自适应算法应用于三维大地电磁数值模拟.使用基于非结构网格的矢量有限单元法对起伏地表大地电磁正演模拟问题进行求解.使用利用垂向电流密度在物性界面上的连续性对后验误差进行估算的算法指导网格优化.由于全局自适应算法针对观测点优化网格的能力较差,本文通过求解正演问题的对偶问题计算后验误差的加权系数,并对相关加权系数进行改进,从而实现了面向目标的自适应算法.与传统基于结构化网格的电磁正演算法相比,采用非结构网格能够更好地拟合起伏地表和地下不规则异常体.由于使用了面向目标的自适应算法,本文能够使用更少的网格达到较高的计算精度.通过对比本文模拟结果与半空间响应和全局自适应算法计算结果,并通过对比使用改进前和改进后加权系数得到的网格剖分结果验证了本文算法的有效性.

     

Integrating lysimeter drainage and eddy covariance flux measurements in a groundwater recharge model

Abstract

Field-scale water balance is difficult to characterize because controls exerted by soils and vegetation are mostly inferred from local-scale measurements with relatively small support volumes. Eddy covariance flux and lysimeters have been used to infer and evaluate field-scale water balances because they have larger footprint areas than local soil moisture measurements. This study quantifies heterogeneity of soil deep drainage (D) in four 12.5-m² repacked lysimeters, compares evapotranspiration from eddy covariance (ET_EC) and mass balance residuals of lysimeters (ETwb_Lys), and models D to estimate groundwater recharge. Variation in measured D was attributed to redirection of snowmelt infiltration and differences in lysimeter hydraulic properties caused by surface soil treatment. During the growing seasons of 2010, 2011 and 2012, ETwb_Lys (278, 289 and 269 mm, respectively) was in good agreement with ET_EC (298, 301 and 335 mm). Annual recharge estimated from modelled D was 486, 624 and 613 mm for three calendar years 2010, 2011 and 2012, respectively. In summary, lysimeter D and ET_EC can be integrated to estimate and model groundwater recharge.

Editor D. Koutsoyiannis     

Predicting the displacement of triple pendulum™ bearings in a full‐scale shaking experiment using a three‐dimensional element

The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum? (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.     

Comparison of 2D versus 3D modeling approaches for the analysis of the concrete faced rock‐fill Cokal Dam

This paper's primary purpose is to compare the 2D and 3D analysis methodologies in investigating the performance of a concrete faced rock‐fill dams under dynamic loading conditions. The state of stress on the face plate was obtained in both cases using a total strain based crack model to predict the spreading of cracks on the plate and the corresponding crack widths. Results of the 2D and 3D analyses agree well. Although significantly more demanding, 3D analyses have the advantage of predicting the following: (i) the opening of the vertical construction joints; (ii) the cracking at the valley sides; and (iii) the crushing of the plate during the seismic action. During the earthquake loading, the cracking predicted at the base of the face plate after the impounding spread significantly towards the crest of the dam; however, the crack widths are obtained relatively small. Crushing of the face plates at the construction joints is the primary cause of the large scale cracking predicted on the face plate for high intensity earthquakes. Earthquake induced permanent deformation of the fill increases the compressive stresses on the face plate, thereby reducing the minute cracking on the plate. However, this effect also leads to significant increases in the residual openings at the construction joints and at the plinth level. Copyright © 2013 John Wiley & Sons, Ltd.     

九瑞矿集区重磁三维约束反演及深部找矿意义

研究九瑞矿集区成矿地层和岩体的三维分布特征可为区域成矿背景和成矿规律研究提供新的信息,实现研究区深部及外围找矿突破.本文首先综合分析研究区区域地质及地层和岩石密度和磁化率特征,然后将区域地质和12条地质剖面信息利用自行开发的GIF2UBCmodel程序构建剩余密度和磁化率参考模型和上下边界约束模型,实现了带约束重磁数据三维反演.反演结果揭示九瑞矿集区剩余密度和磁化率三维分布特征,解译了矿集区主要地层和岩体分布特征.该区存在邓家山—东雷湾以及武山—丁家山两个大型岩体;盖层褶皱与结晶基底隆起方向一致,是深部基地隆起的继承.通过与矿集区已知矿床对比发现,高磁性岩体边缘和基底隆起(高密度体)两翼为成矿有利区.