基于微电子系统（MEMS）加速度地震勘探三分量数字检波器简介

基于微电子机械系统（MEMS）制成的微加速度三分量数字地震检波器。集数据采集、处理及传输功能干一体，在结构模型、工作原理、性能指标控制等方面不同于常规检波器，其信号幅值在低于自然频率范围内没有衰减。因其独特的制造技术，MEMS检波器具有超低噪声，大动态范围和极高的向量保真度性能。     

吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

绿片岩三轴流变力学特性的研究(Ⅰ):试验结果

为了解锦屏一级水电站坝基绿片岩的流变力学特性，采用岩石全自动流变伺服仪对绿片岩进行了三轴压缩流变试验。基于试验结果，研究了绿片岩在不同围压作用下的轴向应变以及侧向应变随时间的变化规律，讨论了流变特性对岩石应力一应变曲线的影响，探讨了不同应力水平下的轴向以及侧向流变速率变化趋势，分析了不同围压下流变的破裂机制，掌握了绿片岩三轴流变的基本规律，从而为该水电站工程流变数值分析时参数的辨识提供了可靠的依据。     

绿片岩三轴流变力学特性的研究(II):模型分析

首先,基于在岩石全自动流变伺服仪上得到的绿片岩三轴流变试验曲线,采用五元件线性粘弹性模型对表现为粘弹性流变特性的曲线进行了辨识,获得了绿片岩的粘弹性流变参数;然后,提出了一个新的非线性粘性元件,并将其与塑性体并联起来,得到一个新的非线性粘塑性体(NVPB),该体能充分反映岩石的加速流变特性:同时,将NVPB模型与五元件粘弹性模型串联起来,建立了一个新的岩石七元件非线性粘弹塑性流变模型。采用绿片岩加速流变全过程曲线,对提出的岩石七元件非线性粘弹塑性流变模型进行了辨识,得到了岩石七元件非线性粘弹塑性流变模型的材料参数。流变模型与试验结果的比较,显示了所建模型的正确性与合理性。     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

A critical state interpretation for the cyclic liquefaction resistance of silty sands

Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p₀<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

Study of the liquefaction resistance of a saturated sand reinforced with Geosynthetics

This article presents various tests using a cyclic triaxial instrument, on samples of saturated Hostun RF sand, reinforced with circular sheets of geosynthetic material. Tests performed with different types of geosynthetics of different compressibility, rigidity and roughness characteristics indicate a significant increase in liquefaction resistance for samples reinforced with compressible, non-woven geotextiles. The undrained behaviour of saturated Hostun RF sand reinforced with non-woven geotextiles is analysed on the basis of different test series. This analysis highlights the influence of reinforcement compressibility on interstitial pressure distribution in the sample, thus showing the role of this type of inclusion in the increase in liquefaction resistance.     

天津泰达地区粉土振动液化特性的研究

本文以动三轴试验和原位测试数据为基础，以天津地区砂性土为例，探讨砂性土振动液化机理及孔隙水压力变化规律，采用多种方法分析判别砂性土液化，为高烈度地区重要工程建筑抗震设计提供重要数据。