Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantifying flows along hydrological pathways by applying a new filtering algorithm in conjunction with master recession curve analysis

Quantifying the proportion of the river hydrograph derived from the different hydrological pathways is essential for understanding the behaviour of a catchment. This paper describes a new approach using the output from master recession curve analysis to inform a new algorithm based on the Lyne and Hollick ‘one‐parameter’ signal analysis filtering algorithm. This approach was applied to six catchments (including two subcatchments of these) in Ireland. The conceptual model for each catchment consists of four main flow pathways: overland flow, interflow, shallow groundwater and deep groundwater. The results were compared with those of the master recession curve analysis, a recharge coefficient approach developed in Ireland and the semi‐distributed, lumped and deterministic hydrological model Nedbør‐Afstrømings‐Model. The new algorithm removes the ‘free variable’ aspect that is typically associated with filtering algorithms and provides a means of estimating the contribution of each pathway that is consistent with the results of hydrograph separation in catchments that are dominated by quick response pathways. These types of catchments are underlain by poorly productive aquifers that are not capable of providing large baseflows in the river. Such aquifers underlie over 73% of Ireland, ensuring that this new algorithm is applicable in the majority of catchments in Ireland and potentially in those catchments internationally that are strongly influenced by the quick‐responding hydrological pathways. Copyright © 2013 John Wiley & Sons, Ltd.     

Limitations of suction‐controlled triaxial tests in the characterization of unsaturated soils

Behavior of unsaturated soils is influenced by many factors, and the influences of these factors are usually coupled together. Suction‐controlled triaxial (SCTX) tests are considered to allow researchers to investigate influences of individual variables on unsaturated soils under specified stress path with controls of stresses, pore water, and air pressures. In the past 50 years, SCTX testing method has been established as a standard approach to characterize constitutive behavior of unsaturated soils. Most important concepts for modern unsaturated soil mechanics were developed upon results from the SCTX tests. Among these, one of the most important contributions in the constitutive modeling of elasto‐plastic behavior for unsaturated soils is the Barcelona basic model (BBM) proposed by Alonso et al. in 1990. The BBM successfully explained many features of unsaturated soils and received extensive acceptance. However, the SCTX tests are designed based upon the divide‐and‐conquer approach in which an implicit assumption is used: soil behavior is stress‐path independent. However, it is well‐established that unsaturated soil behavior is elasto‐plastic and stress‐path dependent. It is found that the SCTX tests in fact cannot control the stress path of an unsaturated soil during loading. This incapability, in combination with complicated loading/collapse behavior of unsaturated soils, makes the SCTX tests for characterizing unsaturated soil questionable. This paper discusses the limitations of the SCTX tests in the characterization of unsaturated soils. A possible solution to the problem was proposed based on a newly developed modified state surface approach. The discussions are limited for isotropic conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

The behavior of magneto-acoustic-gravity waves near the cusp resonance in a lossless,compressible, isothermal,stratified, electrically conducting and uniformly magnetized atmosphere. II: The valve effect

Abstract

In the present paper the behavior of (internal) magneto-acoustic-gravity waves near the cusp resonance in a lossless, compressible, isothermal, stratified, electrically conducting atmosphere that is permeated by a uniform, nearly horizontal magnetic field is re-addressed (Kamp, 1989). The previously analyzed linear conversion of long acoustic-gravity waves into short magneto-acoustic waves that carry off the energy from the resonance region along the magnetic field, is re-analyzed with boundary layer techniques that are based on the smallness of the vertical component of the magnetic field. More specifically the existence of the so-called valve effect for the generated magneto-acoustic mode near the critical level is explicitly demonstrated and shown to be governed by two rivalling effects.     

Geochemical and isotopic characterization of trace fossil infillings: New insights on tracemaker activity after the K/Pg impact event

Geochemical and isotopic analyses of the Cretaceous–Paleogene (K/Pg) boundary deposits were conducted at the Caravaca section (External Subbetic, southeast of Spain) in order to evaluate the recovery of the macrobenthic tracemaker community and the bioturbational disturbance. Samples from the infilling material of several lower Danian dark-colored trace fossils (Chondrites, Planolites, Thalassinoides and Zoophycos) located in the uppermost 8-cm of the light upper Maastrichtian strata, as well as samples from the host sedimentary rock of these trace fossils, were analyzed and compared with data from the lower Danian deposits. The values of element ratios indicative of extraterrestrial contamination (Cr/Al, Co/Al and Ni/Al) are higher in the infilling trace fossil material than in the upper Maastrichtian and lower Danian deposits, which suggests a contribution of the ejecta layer. Regarding the isotope composition, the δ¹³C values are lower in the infilling material than in the Maastrichtian host sedimentary rocks surrounding the traces, while the δ¹⁸O are higher in the infilling material. The geochemical and isotopic compositions of the infilling material evidence the unconsolidated character of the sediment, including the red boundary layer. Softground conditions confirm a relatively rapid recovery by the macrobenthic tracemaker community, starting a few millimeters above the K/Pg boundary layer. The mixture of the infilling material of the trace fossils moreover reveals a significant macrobenthic tracemaker activity affecting K–Pg boundary transition sediments that may have significantly altered original signatures.     

Effects of surface flux parameterization on the numerically simulated intensity and structure of Typhoon Morakot (2009)

The effects of surface flux parameterizations on tropical cyclone(TC) intensity and structure are investigated using the Advanced Research Weather Research and Forecasting(WRF-ARW) modeling system with high-resolution simulations of Typhoon Morakot(2009).Numerical experiments are designed to simulate Typhoon Morakot(2009) with different formulations of surface exchange coefficients for enthalpy(C_K) and momentum(C_D) transfers,including those from recent observational studies based on in situ aircraft data collected in Atlantic hurricanes.The results show that the simulated intensity and structure are sensitive to C_K and C_D,but the simulated track is not.Consistent with previous studies,the simulated storm intensity is found to be more sensitive to the ratio of C_K/C_D than to C_K or C_D alone.The pressure-wind relationship is also found to be influenced by the exchange coefficients,consistent with recent numerical studies.This paper emphasizes the importance of C_D and C_K on TC structure simulations.The results suggest that C_D and C_K have a large impact on surface wind and flux distributions,boundary layer heights,the warm core,and precipitation.Compared to available observations,the experiment with observed C_D and C_K generally simulated better intensity and structure than the other experiments,especially over the ocean.The reasons for the structural differences among the experiments with different C_D and C_K setups are discussed in the context of TC dynamics and thermodynamics.     

不同大尺度强迫条件下考虑初始场与侧边界条件不确定性的对流尺度集合预报试验

研究了不同大尺度强迫条件下的暴雨个例中,考虑不同尺度特征的初始扰动与侧边界扰动相互作用构造对流尺度集合预报的可行性,为进一步构建“自适应”于不同强对流天气的对流尺度集合预报系统提供依据。结果表明,在大尺度强迫显著的个例1中,以大尺度扰动信息为主的动力降尺度的增长趋势较集合转换卡尔曼滤波(ETKF)更为显著,且总扰动能量在预报中后期超过集合转换卡尔曼滤波,而在大尺度强迫较弱的个例2中,集合转换卡尔曼滤波扰动能量始终高于动力降尺度。此外,当大尺度强迫显著时,初始扰动与侧边界扰动相匹配会产生相互促进的作用,而不匹配时初始扰动会在预报中后期抑制侧边界扰动的发展,当大尺度强迫较弱时,即使是互相间不匹配的初始扰动与侧边界扰动也能在大部分预报时段起到相互促进的作用,说明初始扰动与侧边界扰动的相互作用机制不仅与天气形势相关,也与二者是否匹配挂钩,另外,扰动的发展特征同样依赖于天气形势;从集合离散度的角度来看,当大尺度强迫明显时,侧边界扰动的作用会在更短的时间内取代初始扰动,从而对离散度起到主导地位;两种初始扰动方法相比,集合转换卡尔曼滤波在多数情况下对总离散度的贡献均大于动力降尺度;从降水量预报及概率预报情况来看,大尺度强迫明显的个例可预报性更高,且各集合成员间的差异较小,大尺度强迫较弱的个例则相反,且当两种初始扰动方案与侧边界扰动相结合时,较仅侧边界扰动均有一定提高。      

Characteristic and Geological Significance of Microbially Induced Sedimentary Structures(MISS) in Terrestrial P-T Boundary in Xingyang,Western He’nan Province

Microbially Induced Sedimentary Structures (MISS) are primary sedimentary structures that arise syndepositionally from microbial community activity. Especially valuable are MISS for the analysis of early Archean (and extraterrestrial) deposits. However, most reports of MISS have focused on the Precambrian and Phanerozoic mass extinction marine sediments, and only a few and terrestrial MISS have been studied. The MISS presented in this paper, which mainly consists of mat growth feature, mat destruction feature and mat decay feature, are well preserved in terrestrial clastic rocks around the P-T boundary in Xiyang area, western Henan. Large U ridges, oriented sand quartz, mica grains and thin clayey laminae arranged parallel to bedding plane are the main features visible under the microscope. Several lines of evidence indicate that the Xingyang MISS are of biogenic origin. Abundant MISS in Xingyang may indicate the degradation of terrestrial ecosystems and proliferation of microbial mats immediately after the severe Permian-Triassic mass extinction. Study aiming at MISS helps to analyze their space distribution in the globe and to probe into links between microbial proliferation and environmental stresses following the end-Permian mass extinction in terrestrial ecosystems.     

层状边坡滑动边界强度参数取值方法研究

滑坡滑带土强度参数取值的准确性,决定了滑坡稳定性计算的可靠程度。因此获得准确、可靠的滑动边界强度参数至关重要。然而在实际情况中,由于取样位置试样的代表性,以及试样转运过程中保存条件的限制,现场所取得的滑带土在室内试验得到的强度参数已经不能完全反映真实环境下的抗剪强度。因此考虑软弱夹层、滑带土各种物理和力学指标间存在必然联系,并表现出特定的规律性,尝试通过试验,揭示指标间的关联规律,并建立了相关性好的关系式,据此评价滑动边界的抗剪强度参数。