延安新区地表垂直形变时空演化的经验正交函数分析

采用SBAS-InSAR技术对43景Sentinel-1A影像进行处理,获取延安新区（北区）地表形变信息,并运用经验正交函数对结果进行分解,得到研究区域的时间系数和空间分布。结果表明,延安新区（北区）的最大沉降速率为-56 mm/a,最大抬升速率为32 mm/a。从第1模态可以看出,挖方、填方是造成地表抬升和沉降的主要原因;第2模态则反映了工程建设不同时期对应的不同地表形变状态,即加速、减缓、平稳3个阶段。     

菲律宾棉兰老岛2019年4次MW>6.0地震断层运动模型及库仑应力传输研究

基于雷达干涉测量技术,利用ALOS-2、Sentinel-1卫星升降轨雷达影像,获得2019-10~12发生在菲律宾棉兰老岛的4次M_W>6.0地震的同震形变场,并以此形变结果为约束,反演得到4次地震的断层运动模型。综合分析发现,此次地震序列由3条断裂的破裂引起,其中2019-10-16和2019-10-31的2次地震为同一发震断裂,2019-10-31地震断层破裂区域位于2019-10-16地震断层破裂的东北延伸段,最大滑动量约为1.1 m,约为2019-10-16地震最大滑动量的2倍。2019-10-29地震由一条独立断层破裂引起,断层最大滑动量约为2.0 m。2019-12-15地震由一条东北向倾斜断层破裂引起,断层最大滑动量约为3.0 m。此外,2019-10-16地震引起2019-10-29地震显著滑动区明显的正向库仑应力传输;而2019-10-29地震显著增加了2019-10-31地震震源区域的库仑应力;前3次地震对2019-12-15地震孕震断层的库仑应力传输总和为负值,说明静态库仑应力传输可能不是此次地震触发的主要诱因。     

分数阶傅里叶变换联合支持向量机的建筑物变形预测

提出一种分数阶傅里叶变换(fractional Fourier transformation, FrFT)与支持向量机(support vector machine, SVM)相结合的建筑物变形组合预测模型。首先利用FrFT对变形时间序列进行多尺度分析,将复杂时间序列分解为一系列结构较为简单的子序列;然后利用SVM对每个子序列分别建立预测模型,通过将各个子序列的预测结果进行综合叠加,得到最终预测结果;同时考虑到SVM模型参数选择的难题,提出一种改进果蝇优化算法(improved fruit fly optimization algorithm, IFOA)对其进行全局寻优,提升预测性能。以西南地区某混凝土坝变形实测数据为例开展验证实验,结果表明,本文组合预测模型能够充分挖掘数据中隐含的趋势性和规律性信息,获得较高的预测精度。     

New Late Jurassic palaeomagnetic data from the northern Sichuan basin: implications for the deformation of the Yangtze craton

Upper Jurassic red sandstones and red siltstones were collected from 67 layers at 12 localities in the Penglaizhen formation. This formation is in the north of Bazhong county (31.8°N, 106.7°E) in the Sichuan basin, which is located in the northern part of the Yangtze craton. Thermal demagnetization isolated a high-temperature magnetic component with a maximum unblocking temperature of about 690 °C from 45 layers. The primary nature of the magnetization acquisition is ascertained through the presence of magnetostratigraphic sequences with normal and reversed polarities, as well as positive fold and reversal tests at the 95 per cent confidence level. The tilt-corrected mean direction of 36 layers is D = 20.0°, I = 28.8° with α ₉₅ = 5.8°. A Late Jurassic palaeomagentic pole at 64.7°N, 236.0°E with A ₉₅ = 7.0° is calculated from the palaeomagnetic directions of 11 localities. This pole position agrees with the two other Late Jurassic poles from the northern part of the Yangtze craton. A characteristic Late Jurassic pole is calculated from the three poles (68.6°N, 236.0°E with A ₉₅ = 8.0°) for the northern part of the Yangtze craton. This pole position is significantly different from that for the southern part of the Yangtze craton. This suggests that the southern part of the Yangtze craton was subjected to southward extrusion by 1700 ± 1000  km with respect to the northern part. Intracraton deformation occurred within the Yangtze craton.     

Surface vertical displacements, potential perturbations andgravity changes of a viscoelastic earth model induced by internal point dislocations

Using the viscoelastic correspondence principle, we utilize the surface coseismic spheroidal deformation fields (i.e. vertical displacements, potential perturbations and gravity changes) of SNREI earth models caused by four typical types of point dislocation, derived by Sun & Okubo (1993 ), to deduce the fundamental formulas for spheroidal fields relevant to viscoelastic earth models. In computations, we employ a strike-slip dislocation on a vertical plane buried at the bottom of the lithosphere to estimate the maximal viscous relaxation responses to this kind of source that possibly exist on the surface of the earth. We take the seismic moment as 10²²  N  m, which is characteristic of an average large earthquake. The numerical results demonstrate that, if we take the viscosity as 10¹⁹  Pa  s in the asthenosphere, and 10²¹  Pa  s in the other mantle layers, the rates of surface vertical displacements and gravity changes within about 2.5° for the 10 postseismic years are respectively 1.5–8.1  cm  yr⁻¹ and 4.0–14.9  μgal  yr⁻¹ : the viscous relaxation for this mantle viscosity profile proceeds much faster than for a constant mantle viscosity of 10²¹  Pa  s.     

扬子地台西北缘前陆逆冲带及煤田构造特征

扬子地台西北缘前陆逆冲带(即龙门山逆冲带)的形成和演化控制着扬子地台内部及其西北缘煤炭资源的聚积和赋存。它可分为根带、中带、锋带三部分。根带无煤聚积,工业煤炭资源赋存在中带,锋带的煤系埋藏过深。前陆逆冲带内的煤田构造变形是适应前陆逆冲挤压应力作用的结果,以发育有冲断叠瓦扇、双冲构造、平行褶皱、斜歪褶皱、飞来峰、逆冲岩席、断夹块等构造样式为特征。前陆逆冲带的形成是特提斯构造域长期演化、沿三条缝合带发生三次碰撞的结果。      

晋冀蒙地区的垂直形变特征

基于1998、2006和2013年3期水准复测资料,平差计算得到1998~2006年和2006~2013年的垂直形变速率及其垂直形变速率梯度。根据计算结果研究晋冀蒙地区的地壳垂直形变运动趋势以及主要断裂带的活动性,分析区域垂直形变速率和垂直形变速率梯度的演变。结果揭示出吕梁山地块后一时段上升速率增加、太行山地块由前一时段上升变为后一时段下降、盆地地带变化复杂的垂直形变态势。     

新疆觉罗塔格韧性变形带组构及动力学意义

新疆觉罗塔格韧性变形带,惯称秋格明塔什-黄山韧性剪切带,发育于吐哈地块和中天山地块之间的EW向石炭系火山-沉积建造中,由一组走向EW、产状陡立的透入性片理组成。韧性变形带内韧性构造形迹发育,并可分为4个等级:大型构造、小型构造、微观构造和超微观构造。不同级别构造形迹的组构分析表明,觉罗塔格韧性变形带的内部组构是对称的,这意味着其成因于对称的构造变形。与主界面平行的大量压性构造形迹的产出,说明该对称组构成因于与垂直变形带(面)的共轴挤压作用,即觉罗塔格韧性变形带是一个韧性挤压带。      

岩石变形图像分析的计算机统计方法初探

本文利用岩石变形形成的显微构造现象(如压力影、亚颗粒、位错、动态重结晶颗粒等),通过图象分析计算机数理统计方法,来推测地质体变形特征、变形环境、应力状态等。