Geology and Mineral Chemistry of Uranium- and Thorium-bearing Minerals in Rare-Metal (NYF) Pegmatites of Um Solimate,South Eastern Desert,Egypt

The garnet muscovite granitic pegmatite of Um Solimate, in southern Egypt, represents a promising asset for strategic and economic metals, especially Bi–Ni–Ag–Nb–Ta as well as U and Th. The ore bodies occur as large masses, pockets and/or veins of very coarse-grained pegmatites, which consist mainly of K-feldspar, quartz and albite with subordinate muscovite, garnet, and biotite. Radiometric data revealed that eU- and eTh-contents of the pegmatites reach up to 39 ppm and 82 ppm, respectively. The studied pegmatites are enriched in primary U and Th minerals (uraninite, coffinite, thorianite and uranothorite) as well as Hf-rich zircon and monazite, which give rise to anomalous radioactive zones. Niobium-tantalium-bearing minerals (i.e. ferrocolumbite, microlite and uranopyrochlore), xenotime, barite, galena, fluorite, and apatite are ubiquitous, and, consequently, the studied pegmatites belong tothe Niobium–Yttrium–Fluorine-type (NYF) family. The noble metal mineralization includes argentite (Ag2S), native Ni and Bi as well as bismite and bismoclite. In addition, beryl and tourmaline are observed in pegmatites near the contact with metasediments and ultramafic bodies. The observed compositional variations of Ta/(Ta+Nb) and Mn/(Mn+Fe) ratios in columbite (0.08–0.45 and 0.11–0.57, respectively) and Hf contents in zircon (3.54–6.46 wt%) may reflectan extreme degree of magmatic fractionation leading to formation of the pegmatite orebody.     

基于多源遥感影像的长春市城市建成区提取

夜光遥感影像记录的城市灯光与人类活动密切相关,已广泛应用于城市信息提取。珞珈一号作为新一代夜光遥感数据源,比以往的夜光数据具有更高的空间分辨率和光谱分辨率,可以更清晰地表达城市建成区范围和内部结构。本文利用珞珈一号夜光遥感影像,通过人类居住指数（human settlement index, HSI）、植被覆盖和建筑共同校正的城市夜光指数（vegetation and build adjusted nighttime light urban index, VBANUI）及支持向量机（support vector machine, SVM）监督分类3种方法对长春市城市建成区进行提取,并与利用NPP/VIIRS（suomi national polar-orbiting partnership/visible infrared imaging radiometer suite）夜光遥感影像、采用同样方法得到的结果对比。结果显示：本文提出的VBANUI提高了传统植被覆盖校正的城市夜光指数（vegetation adjusted nighttime light urban index, VANUI）的提取精度,使用珞珈一号夜光遥感影像通过VBANUI提取的城市建成区结果最优,其Kappa系数为0.80,总体分类精度为90.74%;使用珞珈一号和NPP/VIIRS夜光遥感影像通过HSI按最佳阈值提取城市建成区的Kappa系数分别为0.75和0.72,总体分类精度分别为88.27%和86.54%;复合数据的SVM监督分类法中Landsat-NDBI、Landsat-NDBI-VIIRS、Landsat-NDBI-LJ和Landsat-NDBI-LJlog的Kappa系数分别为0.602、0.627、0.643和0.681,总体分类精度分别为81.11%、81.52%、82.25%和84.48%。研究结果表明：3种提取方法下,均为使用珞珈一号夜光遥感影像的结果优于使用NPP/VIIRS夜光遥感影像的结果,证明相比于NPP/VIIRS夜光遥感影像,珞珈一号夜光遥感影像更适用于城市尺度的建成区范围提取。     

利用分布式光纤声传感设备开展青藏高原易贡湖浅层结构探测

地震数据是利用地震学方法探测地下结构的基础条件,然而传统地震仪器难以获得极端环境地区(水下、高原等)的长时间、高密度连续数据。较之国际仪器厂商,国内的DAS研制相对较晚。自2016年起,国产DAS逐步应用于石油测井和城市区域地下结构探测,而运用在极端环境下的探测工作尚未见报道。中国科学院半导体研究所与青藏高原研究所经过多年合作研究,于2021年4月将自主研发的DAS系统首次应用于青藏高原的野外数据采集。本次试验同时记录了地面和水下的连续背景噪声和重锤数据。该研究利用背景噪声成像技术,获得了西藏易贡湖地区地表70 m以内的横波速度结构。本次研究为极端环境下的低成本、高密度数据采集和地下结构探测提供了理论和试验依据。     

渤海海域埕岛低凸起东部南区新生代断裂系统及油气分布的控制作用

埕岛低凸起东部南区新生代受控于伸展与走滑作用,断裂构造复杂,传统认为中深层北东向与近东西向断层属于同期同沉积断层。针对这一观点及引起的问题,利用钻井和地震资料,运用构造地质理论解析断裂系统。研究区主要发育正断层、走滑正断层两种类型,断开层位有基底—东营组、平原组—东营组、平原组—基底三种情况,现今断裂以东营组与馆陶组之间的区域不整合面为时限划分为两期断裂系统。早期断裂主要切开基底—东下段,属于同沉积断层;晚期断裂主要切开平原组—东营组,可断达基底,其发育受早期断裂制约。北东向与近东西向断层分别属于早晚两期断裂系统,对油气分布各起关键性控制作用:先期基底升降引起的伸展作用形成北东向断层,控制洼槽地貌与深水重力流沉积环境,发育了连片的层状砂质碎屑流;后期郯庐断裂右行走滑派生了近东西向雁列断层,断层面既充当储层上倾方向的遮挡条件,又在东西向挤压时封闭性变差而变成油气垂向运移通道,断层及断层作用控制了圈闭分布与油气聚集的有序性,自东向西,圈闭及油水界面依次升高且充满度变小,呈全充满、欠充满、半充满等状态。断裂系统研究将地质体置于一定的构造应力场中,分析断层组合的空间排列和交切关系以及断层的力学机制和位移特征等,探究时空演化对油气分布的控制作用。断裂系统研究方法在构造作用叠合区具有适宜性,对该区及类似地区的勘探开发具有现实意义。     

福建凤山矿区石墨矿地质特征及控矿因素分析

通过对福建省漳平市凤山矿区石墨矿近年来硐探、钻探等地质资料系统的梳理,在分析矿区地质特征和矿体特征的基础上,深入研究了石墨矿的控矿因素。研究认为该区石墨矿是由赋存于中二叠统童子岩组的无烟煤经过高温、高压作用进一步变质而成的。煤层受到岩浆热变质作用使碳物质(煤)分解,重新富集形成以隐晶质(土状)为主的隐晶质石墨矿,因此本区石墨矿的控矿因素是温度和构造。由于过往对福建煤系石墨资源的研究程度不够深入,造成大部分煤系石墨矿划归煤矿,致使石墨矿资源被浪费,本次通过野外地质勘查、采样样品测试等工作,确定了凤山矿区为煤系石墨矿,为下一步勘探工作提供有力依据,为合理开发利用矿产资源指明新的方向。     

Pore structure and heterogeneity of shale gas reservoirs and its effect on gas storage capacity in the Qiongzhusi Formation

Fine characterization of pore systems and heterogeneity of shale reservoirs are significant contents of shale gas reservoir physical property research.The research on micro-control factors of low productivity in the Qiongzhusi Formation(Fm.)is still controversial.The lower Cambrian Qiongzhusi Fm.in the Qujing,Yunnan was taken as the object to investigate the influence of mineral compositions on the phys-ical properties of the reservoir and the heterogeneity of shale,using the algorithm to improve the char-acterization ability of Atomic Force Microscopy(AFM).The results showed that:(1)The pores are mainly wedge-shaped pores and V-shaped pores.The pore diameter of the main pore segment ranges from 5 to 10 nm.Mesopores are mainly developed in the Qiongzhusi Fm.shale in Well QD1,with the average pore diameter of 6.08 nm.(2)Microscopic pore structure and shale surface properties show strong hetero-geneity,which complicates the micro-migration of shale gas and increases the difficulty of identifying high-quality reservoirs.(3)The increase of clay mineral content intensifies the compaction and then destroys the pores.Conversely,brittle minerals can protect pores.The support and protection of brittle minerals to pores space depend on their content,mechanical properties and diagenesis.(4)Compression damage to pores,large microscopic roughness and surface fluctuations and strong pore structure heterogeneity are the reasons for the poor gas storage capacity of the Qiongzhusi Fm.,which will lead to poor productivity in the Qiongzhusi Fm.     

Discovery and significance of Lizifang metamorphic core complex in Zhuanghe area of southern Liaoning

On the basis of the previous regional geological survey, based on the macroscopic and microscopic structural survey, combined with the comprehensive analysis of the regional magmatic activity and dating data, the authors in this paper revealed that there is another metamorphic core complex structure in Lizifang area of Southern Liaoning, namely Lizifang metamorphic core complex. A typical three-layer structure and five parts exist in the core complex, which are the footwall composed of Neo-archean metamorphic plutonic rocks and mesozoic granite intrusive rocks, the detachment fault zone composed of different levels of tectonic rocks, and the upper plate composed of Precambrian sedimentary cap and Cretaceous extensional basin. Lizifang metamorphic core complex formed in the Early Cretaceous Epoch, and the upper plate moved from NWW to SEE relaive to the footwall, which was similar with Jinzhou metamorphic core complex and Wanfu metamorphic core complex in geometry, kinematics polarity and formation time, indicating the same dynamic background. The determination of the metamorphic core complex may provide a basis for the late Mesozoic lithospheric thinning process and the mechanical and rheological properties of the lithosphere in the east of North China Craton. At the same time, the metamorphic core complex is closely related to the mineralization of gold deposits. So the detachment fault zone of Lizifang metamorphic core complex can serve as the key work area for further gold exploration, which may possess large mineralization potential.     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

Hydro-geochemistry of groundwater and surface water in Dschang town(West Cameroon): Alkali and alkaline-earth elements ascertain lithological and anthropogenic constraints

This study focuses on the sources of alkali and alkaline-earth elements based on the geochemistry of groundwater and surface water in Dschang concerning environmental and anthropogenic constraints. A comprehensive set of 50 samples from groundwater and surface water were analyzed by ICPMS and processed by spatial interpolation in a GIS environment. The results highlight a geochemical anomaly at the center of the densely inhabited area subject to a profusion of open dumps discharges. This anomaly with the highest spatial contents of Be(Cs, Rb, Mg) suggests an anthropogenic source that demarcates with the lowest alkali and alkaline-earth elements on the peripheral area of Dschang. Other findings include lithological constraints with volcanic rocks being the main source compared to granitoid.The study points out good correlations between Be, Cs, Rb and Mg spatial distributions and physicochemical parameters of waters(K, EC, TDS), and inversely with the lowest p H. p H is established as the most functioning physico-chemical constraint of alkali and alkaline-earth mobility in Dschang. The p H lowest values within the geochemical anomaly also highlight the impact of human activities on water acidity, which later enhance elements mobility and enrichment. Despite low elements contents relative to WHO standards, our findings point out an example of anthropogenic impact on water geochemistry linked to solid waste pollution; it also demonstrates significant anthropogenic changes of environmental physicochemical parameters of prime importance in the mobility and distribution of elements in the study area.Similar assessments should be extended in major towns in Cameroon.     

An Operational Precipitable Water Vapor Retrieval Algorithm for Fengyun-2F/VISSR Using a Modified Three-Band Physical Split-Window Method

The Visible and Infrared Spin-Scan Radiometer(VISSR) onboard the Fengyun-2(FY-2) satellite can provide valuable thermal infrared observations to help create a precipitable water vapor(PWV) product with high spatial and temporal resolutions. The current FY-2/VISSR PWV product in operation is produced by using a traditional two-band physical split-window(PSW) method, which produces low quality results under dry atmospheric conditions. Based on the sensitivity characteristics of FY-2 F/VISSR water vapor channel and two split-window channels to atmospheric water vapor, this study developed a new, robust operational PWV retrieval algorithm for FY-2 F to improve the operational precision of the current PWV product. The algorithm uses a modified three-band PSW method, which adds a scale for the water vapor channel in the improved three-band PSW method. Integrated PWV products from the radiosonde data in 2016 are used here to validate the precision of the PWV retrieved by the modified three-band and traditional two-band PSW methods. The mean bias, root mean square error(RMSE), and correlation coefficient of the PWV retrieved by the modified three-band PSW method are 0.28 mm, 4.53 mm, and 0.969, respectively. The accuracy is much better than the PWV retrieved by the two-band method, whose mean bias, RMSE, and correlation coefficient are 12.67 mm, 29.35 mm, and 0.23. Especially, in mid-or high-latitude regions, the RMSE of the PWV is improved from 10 to 2 mm by changing the inversion in the two-band method to the modified three-band PSW method. Furthermore, the modified three-band PSW results show a better consistency with the radiosonde PWV at any zonal belt and season than the two-band PSW results. This new algorithm could significantly improve the quality of the current FY-2 F/VISSR PWV product, especially at sites where the actual PWV are lower than 15 mm.