电磁波信号在对流层中路径弯曲改正的级数展开式

大气折射延迟是空间大地测量中的一个主要误差源。本文严格地给出了中性大气路径弯曲改正的原理性公式。通过对各种因素量级的分析,在亚毫米量级的精度上给出了一个以视天顶距正切和正割乘积为参数的级数展开模型。新模型在球对称大气模型下,级数展开模型的精度达到了毫米量级,理论上可以展开到任意阶次,且可允许观测高度角小到5°。     

露天矿GPS卡车调度系统数据流处理方法

露天矿GPS卡车调度系统是数字矿山建设中的重要组成部分,是露天矿生产管理利用GPS／GIS技术提高生产效益的有效途径之一。本文根据露天矿GPS卡车调度系统的组成、工作原理和数据流交换模式,提出了基于数据回放条件下的装卸车时序匹配计算方法以及数据流处理的主要内容。抚顺西露天矿的实践证明,该计算方法是一种处理卡车调度系统数据流的有效且可行的办法。     

三种电离层延迟多频修正算法的比较

电离层延迟多频修正算法在修正电离层延迟的同时会放大观测噪声等伪距误差的影响。分析了电离层延迟双频修正、三频一阶修正和三频二阶修正三种修正算法及观测噪声的影响。以Galileo系统的四个载波频率为例,对不同频率组合下三种修正算法进行了比较。结果表明电离层延迟多频修正中,并不是观测量的频点数越多或修正掉的高阶项越多修正精度越高,还与观测伪距噪声的大小以及采用的修正方法有关。为多频测距系统的电离层延迟修正算法和最佳频率组合设计提供了一种可行的分析方法。     

酸溶——催化极谱法测定地质样品中的钨、钼

本文采用混合酸溶解样品,对影响催化体系稳定的酸度、温度和不同反应时间的因素分别进行了对比试验,确定催化体系相对稳定的最佳条件,经过大量样品的分析验证,分析方法可靠。     

GPS单频精密单点定位方法与实践

讨论了单频精密单点定位的解算方法与思路,编写了单频精密动态单点定位的程序,实现了事后动态单频精密单点定位.     

矿井涌水量混沌时间序列分析与预测

矿井地下水系统是个非线性系统,由于地下水系统的复杂性,很难完全确定影响矿井涌水量的因素,因此传统的矿井涌水预测表现出较大的局限性。而混沌时间序列分析能够利用单变量处理方法,分析矿井地下水系统中,由于多因素耦合作用所产生的矿井涌水量时间序列。通过对某矿区1985年9月至2005年2月矿井涌水量时间序列资料的分析,显示矿井涌水量时间序列具有混沌特征;通过对比预测值和实测值,表明预测精度高。因此,混沌时间序列分析方法用于矿井涌水量预测是可行的。     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.     

The ionospheric eclipse factor method (IEFM) and its application to determining the ionospheric delay for GPS

A new method for modeling the ionospheric delay using global positioning system (GPS) data is proposed, called the ionospheric eclipse factor method (IEFM). It is based on establishing a concept referred to as the ionospheric eclipse factor (IEF) λ of the ionospheric pierce point (IPP) and the IEF’s influence factor (IFF) . The IEF can be used to make a relatively precise distinction between ionospheric daytime and nighttime, whereas the IFF is advantageous for describing the IEF’s variations with day, month, season and year, associated with seasonal variations of total electron content (TEC) of the ionosphere. By combining λ and with the local time t of IPP, the IEFM has the ability to precisely distinguish between ionospheric daytime and nighttime, as well as efficiently combine them during different seasons or months over a year at the IPP. The IEFM-based ionospheric delay estimates are validated by combining an absolute positioning mode with several ionospheric delay correction models or algorithms, using GPS data at an international Global Navigation Satellite System (GNSS) service (IGS) station (WTZR). Our results indicate that the IEFM may further improve ionospheric delay modeling using GPS data.     

动态最小二乘支持向量机学习算法

针对大样本集的训练问题和动态训练样本的模型更新问题,提出了动态最小二乘支持向量机学习算法.该算法充分利用已建好的模型,逐渐加入新样本,并可删除位于任何位置的非支持向量,避免了矩阵求逆运算,保证了算法的高效率.大坝变形及电离层延迟两个时间序列的预报实例表明,该算法具有计算时间短、预报精度高的特点.     

葛店矿双庙扩大区三维地震勘探

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。