Taxonomical and Biogeochemical Investigation of Elements in Holocene Mollusk Shells in the South and Southwestern Marmara Basin,Turkey

Concentrations of some heavy metals and trace elements such as Cr, Ga, Ni, Zn, Mo, Cu, Pb, Yb, Y, Nb, Ti, Sr, Ba, Mn, Sc, Co, V, Zr, Fe, Al, W, Se, Bi, Sb, As, Cd in recent mollusk shells and factors affecting their distribution and deposits collected from various depths in the southern and southwestern parts of the Marmara Sea are investigated. The distribution of the elements in the shells is categorized into four groups. Of these, concentrations of 12 elements （As, Bi, Cd, Co, Ga, Mo, Nb, Sb, Se, Sc, W and Yb） are below zero [（0.053-0.79）×10^-6]; concentrations of seven elements （Cr, Ni, Pb, V, Y, Zr and Cu） are （1.0-6.0）×10^-6; concentrations of four elements （Ti, Mn, Ba and Zn） are 10- 20×10^-6; and concentrations of five elements （Si, Al, Fe, Mg and Sr） are （47.44-268.11）×10^-6. The taxonomic characteristics of the 29 elements were studied separately in mollusk shells such as Chamalea gallina （Linn6）, Pitar rudis （Poli）, Nassarius reticulatus （Linn6）, Venerupis senescens （Coocconi）, Mytilus galloprovincialis （Lamarck）, Mytilaster lineatus （Gemelin in Linne） and Chlamys glabra. It was found that, in mollusk taxonomy, the elements have unique values. In other words, element concentrations in various mollusk shells depend mainly on the taxonomic characteristics of mollusks. In various bionomic environments different element distributions of the same species are attributed to the different geochemical characters of the each environment. Data obtained in this study indicate that the organisms are the most active and deterministic factors of the environment.     

评价生物气生成量、生成期的元素平衡法及其应用

生物气的生成期对其成藏有至关重要的制约作用,但目前国内外尚缺少可信、有效方法来对此进行评价。针对这一难题,考虑到无论生物气的生成机理如何,都是一个有机元素之间的物质平衡过程,文章探索并建立了评价生物气生成量的元素平衡法,并利用松辽盆地大量的实际分析数据,对这一评价方法(模型)进行了标定和应用。结果表明,松辽盆地生物气的生成可能主要发生在800m以浅的埋深条件下;区内源岩生物气的生成量约为285.0×1012m3;生物气的主要生成期在嫩江组沉积末期之前。     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

A continuous/discontinuous Galerkin framework for modeling coupled subsurface and surface water flow

We consider conjunctive surface-subsurface flow modeling, where surface water flow is described by the shallow water equations and ground water flow by Richards’ equation for the vadose zone. Coupling between the models is based on the continuity of flux and water pressure. Numerical approximation of the coupled model using the framework of discontinuous Galerkin (DG) methods is formulated. In the subsurface, the local discontinuous Galerkin (LDG) method is used to approximate ground water velocity and hydraulic head; a DG method is also used to approximate surface water velocity and elevation. This approach allows for a weak coupling of the models and the use of different approximating spaces and/or meshes within each regime. A simplified LDG method based on continuous approximations to water head is also described. Numerical results that investigate physical and numerical aspects of surface–subsurface flow modeling are presented. This work was supported by National Science Foundation grant DMS-0411413.     

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

太原盆地农田区大气降尘对土壤重金属元素 累积的影响及其来源探讨

通过研究太原盆地大气干湿沉降中重金属元素的含量分布特征及年输入通量,讨论其对土壤中重金属元素累积的影响。同时采用富集因子法探讨降尘物质的来源。研究结果表明,降尘中重金属元素As、Cd主要来源于人为活动,Pb的来源可能是人为源和自然源。而Hg则主要来源于自然源。     

西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。     

三维地震小面元采集技术在晋城矿区的应用

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。