Crystal chemical significance of chemical zoning in dissakisite-(Ce)

Dissakisites from Trimouns dolomite mine, France, have two kinds of single crystals: chemical-zoned and homogeneous types. Back-scattered electron microprobe (BSE) images of these dissakisites reveal both Ca–Al rich dark zones and Fe-ΣREE rich bright zones. Crystal structures of three dark and two bright zones in a chemical-zoned dissakisite and of a homogeneous zone in unzoned dissakisite were refined to individual R indices (about 3.0–5.0%) based on 1,400 observed [|F ₀| > 4σF ₀] reflections measured with MoKα X-radiation using the single crystal diffractometer. The differences in brightness between their BSE images arise from those in coupled substitutions of the elements occupying A2 and M3 sites. The main reason for these differences is that ten-coordinated A2 polyhedra and M3 octahedra are directly linked through their shared edge, which creates a great potential for making this coupled substitution. This zoning indicates that formation of the whole zoned crystal, where each zone could be grown steadily with its crystallographic axes mutually parallel to each other, may be identified as autoepitaxy.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Ground motion estimation during the Kashmir earthquake of 8th October 2005

In this article, analytical methods have been used to estimate ground motion during the 8 October 2005, Kashmir earthquake. Peak ground acceleration (PGA) values at several stations in the epicentral region have been estimated by empirical analytical source mechanism models. As an alternate analysis, PGA estimates have also been obtained using the stochastic finite fault seismological model. The estimated PGAs are compared with that obtained from damage values. A PGA contour map in the near-source region is provided. It is found that very near to the epicenter, PGA would have reached more than 1 g. It is demonstrated that empirical analytical models can be effectively used to estimate ground motion due to rupture of active faults.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

贵州修文小山坝铝土矿中镓等伴生元素分布规律研究

通过ICP-MS等分析方法对贵州小山坝铝土矿中伴生元素的研究,发现该矿床TiO2、Ga、Ge、Sc、Nb、Li和REE等有用伴生元素在铝土矿矿体中均有较高富集,其含量大多接近或超过了工业综合利用标准,具有较大的经济价值,特别是矿区富铁铝土矿石中Ga和Sc等含量异常高.贵州铝土矿资源丰富,其伴生元素在铝土矿冶炼过程中所产生的赤泥中更为富集,因此,贵州铝土矿综合利用前景十分巨大,这些元素潜在的经济价值,在某种程度上,甚至会超过主导产品氧化铝的价值.开展铝土矿中镓等伴生有用元素的分布及赋存状态的研究,对于镓等稀散元素在特殊地质地球化学环境中超常富集机制、矿产资源综合价值的重新认识评估和矿产资源的综合利用将十分重要,不仅可为铝工业注入新的活力,增加新的经济增长点,而且还可以解决大量赤泥堆放和利用问题,同时获得较大的社会效益与环境效益.     

冲绳海槽有孔虫壳体的微量元素Sr,Nd同位素地球化学

钙质生物壳的微量元素组合和Sr,Nd同位素组成是识别海底混合源沉积物中生物源物质相对贡献的重要参数.冲绳海槽有孔虫壳体强烈富集Sr,P,Mn和Ba,富集Li,U,Th,Sc,Co,Pb,Zn,Cr,Rb,Y,Sb和轻稀土元素,弱富集V,Ga,Zr,Nb,Cd和中稀土元素,相对贫Ge,Mo,In,Sn,Cs,Hf,Ta,W,Tl,Bi和重稀土元素,海水中微量元素的背景含量和生物活动对微量元素的选择性吸收是有孔虫壳体中微量元素发生富集和贫化的主要机制,冲绳海槽有孔虫壳体的稀土元素配分模式与海水和太平洋有孔虫的有明显差异,表现出中稀土元素相对富集,并具有微弱的负Ce异常.有孔虫壳体的Sr,Nd同位素比值也与大洋海水不同,分别为0.709769和0.512162,前者略高于大洋海水,后者略低于大洋海水,表明冲绳海槽海水明显受大陆河水影响.     

渤海三维海洋温度和海流数值预报

"十·五"期间,我国开展了三维海洋温度和海流数值预报的业务化研究工作.经过3年的努力,渤海三维海洋温度和海流数值预报系统研制完成,并于2003年10月,开始试预报.本文对该预报系统以及运行情况进行了介绍,并分析了所存在的问题和发展方向.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Using the Mellor–Yamada mixing scheme in seasonally ice-covered seas—Corrigendum to: Parameterization of vertical mixing in the Weddell Sea [Ocean Modelling 6 (2004) 83–100]

A coding error in the s-Coordinate Primitive Equation Model (SPEM) has led to misleading statements about the behaviour of the Mellor–Yamada level 2 parameterization of vertical mixing. It has been claimed that the scheme removes static instability only very slowly and preserves statically unstable stratifications for an unrealistic long time. This note corrects this statement by demonstrating that the Mellor–Yamada mixing scheme, if implemented correctly, tends to overestimate rather than underestimate vertical mixing in seasonally ice-covered seas. Similar to other mixing schemes with the same behaviour, this leads to spurious open ocean deep convection, an unrealistic homogenization of the water column, and a significant reduction of sea ice volume.