Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

紫色土水分特征曲线室内测定方法的对比

为探寻全吸力范围内土壤水分特征曲线的可靠测定方法,采用沙箱排水法、Hyprop仪蒸发法、压力膜仪排水法和露点水势仪蒸发法分吸力段测定盐亭紫色土耕地表层2~7 cm和亚表层7~12 cm土壤的水分特征曲线,对比测定结果的方法间差异,并分析其原因。结果表明:对于表层和亚表层土壤,低吸力段(h >-100 cm)水分特征曲线的沙箱法和Hyprop仪法的均方根误差E_RMS (θ)均较小,在0.026~0.082 cm3/cm3范围内,确定系数R2均大于0.962,说明这两种方法测定结果之间差异不大。高吸力段(h <-330 cm)的压力膜仪法与露点仪法测定结果之间的差异较大,E_RMS (θ)为0.062~0.097 cm3/cm3,R2较低,为0.775~0.952。因此,全吸力范围内水分特征曲线测定方法的选择与组合应考虑土壤孔径分布特征和研究目的。     

有限圈闭复杂沥青质稠油层钻井难点与对策

中东YD油田为海相碳酸盐岩地层,Kazh地层分布着活跃的非均质沥青质稠油,高压并含有酸性气体,为非目的层,需要钻穿并封隔该层后对下部产层进行开发。由于沥青质稠油层分布不均,孔隙压力不确定,对钻井工程造成了极大的挑战。在一期施工中,3口井由于沥青质稠油的侵入被迫工程弃井,未能实现工程目的。针对此世界性难点问题,开展了沥青质稠油侵入机理实验研究、固化剂研制、控压钻井技术应用等一系列配套工艺技术研究,提出了复杂沥青质稠油层安全钻井技术对策,现场应用取得较好的效果。     

钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

河元背地区绳索取心钻进泵压计算模型的建立与应用

泵压是反映金刚石绳索取心钻进时井内作业是否正常的重要参数。为了进一步研究泵压波动变化与实际钻进作业之间的关系,指导钻进工作的快速、安全开展,结合江西相山河元背地区CUSD2井实际泵压波动数据及相关钻进资料,建立了适用于本井的循环系统压力损失计算模型。对比分析模型计算的理论泵压与实际泵压的波动变化趋势,将模型应用于实际钻进,在此基础上预测后续地层的泵压波动区域范围,发现7 MPa的泵压安全值不再适用于后续地层钻进,调整设置泵压安全值为10 MPa,并利用邻井泵压波动数据进一步验证其可靠性。适当调整修正理论模型,使其可应用于河元背以及相山地区绳索取心钻进中,指导该地区钻探工作。     

一种越浪式波能发电装置越浪量和波压力的试验研究

越浪式发电装置具有结构稳定、可靠性高等优点。在前人的研究基础上,对越浪式波能发电装置的模型进行了优化设计,通过模型实验研究了该波能发电装置在不同波况、不同干舷高度下对波能的俘获能力以及结构的受力情况。对越浪量的试验结果进行了无量纲分析,分别得出了越浪式模型装置的越浪量关于干舷高度和波高的指数函数拟合曲线,总结了两者对越浪量影响的普遍规律。通过对规则波和不规则波波浪作用下装置受力结果的归纳总结,探讨了波能装置波压力和浮托力变化的一般规律。本研究可为越浪式波能发电装置的研究提供参考依据,为波浪能的利用提供一定的参考价值。     

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.     

Effect of Groundwater Fluctuations on Pore Pressures and Earth Pressures on Coastal Excavation Retaining Walls

Pore water and earth pressures acting on retaining structures are investigated using an efficient coastal double-layered excavation model to determine offshore excavation responses to groundwater fluctuations outside foundation pits. Total pore water pressure includes excess pore water pressure (due to groundwater fluctuations) and steady pore water pressure (due to steady seepage) determined using one-dimensional consolidation theory of double-layered soil and one-dimensional steady-state flow theory, respectively. Rankine's active and passive earth pressures are obtained from pore water pressure. This method is applicable to arbitrary groundwater fluctuation conditions. How physical parameters affect pore water pressure is numerically investigated using examples, demonstrating the method's practicality for calculating pore water and earth pressures.     

Seismic Stability of Gravity Retaining Structures by Pseudo-Dynamic Method

An analytical expression of a gravity retaining wall's seismic stability against sliding and overturning is proposed in this article. The derivation, aiming at the cohesionless soil with inclined backfill surface and nonvertical wall back, is based on limit equilibrium analysis and the pseudo-dynamic method. The variations of the sliding and overturning stability safe factors with the horizontal seismic acceleration are investigated for different seismic amplification factors, soil friction angles, wall friction angles, vertical seismic acceleration coefficients, wall back inclination angles, and backfill surface inclination angles. The results indicate that the soil friction and horizontal seismic action significantly impact the seismic stability. The increase of vertical earthquake action changes the curvature of stability factor curves. The wall friction and back inclination strengthen the gravity retaining wall's resistance to sliding and overturning failure while the backfill surface inclination plays a negative role in the seismic stability. We also found that the seismic stability safe factors calculated by the proposed method are larger but more reasonable than those by the Mononobe-Okabe method.     

红河油田低压易漏地层水平段固井技术

为提高红河油田水平井固井质量,满足后期分段压裂需求,对红河油田水平井固井技术进行了研究。针对红河油田水平段固井技术难点,通过室内和现场试验,优选出了GSJ水泥浆体系,基于实测地层压力与地层破裂压力,进行平衡压力固井设计确定了环空浆体结构,为提高顶替效率,优化了扶正器类型与加放位置,专业软件模拟表明套管居中度＞73%,良好的井眼准备和套管漂浮措施确保了管柱的顺利下入;加长胶塞、树脂滚轮刚性旋流扶正器和关井阀等附件的使用,保证了固井质量。现场应用53口水平井,水泥浆全部返至地面,CBL测井结果表明,固井优良率达81.13%。该固井技术成功应用于红河油田水平井中,保证了固井质量,满足了后期分段压裂的需要。