华北石炭——二叠纪煤系粘土岩夹矸中铝的氢氧化物矿物研究

华北石炭——二叠纪煤系太原组和山西组不同煤层粘土岩夹矸中,广泛含有一水软铝石、一水硬铝石和三水铝石。大多数一水铝石矿物呈薄纹层状、似层状及层状聚集于富岩质及富有有机质粘土岩夹矸条带中,有的呈细脉状沿炭质条带及粘土岩夹矸层理的节理裂隙分布,并与玉髓、方解石、高岭石或迪开石和铵云母细脉共生。铝的氢氧化物矿物可以作为成岩古温度和成岩阶段划分的标志矿物。最后还讨论了该矿物的成因。     

论江西双桥山群的底界问题

１∶５万庐山地区区域地质调查和专题研究，在星子县黄岭一带发现一套巨厚层状复成分的变质砾岩。根据该变质砾岩的砾石成分、变形组构及区域分布特点，以及上部（双桥山群）与下部（星子岩群）地层在变质与变形方面存在明显差别，认为变质砾岩应属于双桥山群的底部层位，是中元古界双桥山群与下伏下元古界星子岩群不整合关系的佐证。由于受后期构造叠加改造的影响，现今二者呈断层或隐蔽不整合接触关系。     

A model study on the decay of volcanic aerosol layer and verification with Pinatubo and El Chichon data

The time evolution of stratospheric aerosol layer formed after a volcanic eruption is studied taking into account the aerosol microphysical processes of growth, coagulation and sedimentation. Using a simple model we could explain the observed evolution of the Pinatubo volcanic layer which decayed in about 3 years. The experimental data obtained by Nd:YAG backscatter lidar over Ahmedabad further supports this finding. The data obtained after the El Chichon volcanic eruption also showed that the El Chichon aerosol layer decayed in about 3 years time. Thus, though the amount of SO₂ injected has been higher, in the case of Pinatubo, about two to three times more than El Chichon, it has resulted in the production of larger aerosol particles due to faster growth and coagulation processes, and subsequently a faster removal rate, to give more or less a similar background aerosol amount at the stratosphere in about 3 years time.     

江苏煤层气资源分析

简要地归纳了江苏省煤层气的成矿地质环境，分析了成煤区地质构造特征、煤层及围岩储层的物性特征，在此基础上，对主要地区煤层气资源进行了估算。     

Predisposition to Induced Seismicity in Some Czech Coal Mines

—Mining-induced seismicity associated with longwall face operations in the Ostrava- Karviná coal mines, Czech Republic, has been investigated in order to establish the conditions leading to a focal zone generation. The study, based on macroseismic and instrumental observations, proved that seismicity is influenced by natural as well as mining conditions. The first group includes the influence of faults, washouts and red beds, while the second one is represented by shaft and/or crosscut safety pillars and various types of remnant pillars. All the cases discussed show that many focal zones are generated in overstressed strata as a consequence of interaction of natural conditions and/or old workings with the active coal face. Received June 18, 1996, accepted March 10, 1997     

华北地台北缘拴马桩煤系

狼山—色尔腾山和大青山的拴马桩煤系曾被认为是分布于华北地台北缘“内蒙地轴”上的晚古生代纯陆相山间盆地沉积。新的研究证明，上述两地的拴马桩煤系的时代并不完全等同，也不是纯陆相地层，更不是同一盆地的含煤沉积     

恩洪-老厂地区煤层气成藏条件研究

煤层气盆地、煤层气系统、煤层气区带的存在及发育程度是煤层气藏形成的充分与必要条件。恩洪盆地和老厂一圭山盆地老厂煤矿区具备了形成煤层气藏的条件。研究其形成煤层气藏的特定条件，总结其煤层气藏模式，是煤层气勘探目标评价的基础。     

疏降地下水引起地面塌陷浅析--以淮南煤矿区为例

以淮南西部矿区为例，介绍了该地区自20世纪60年代开采煤矿以来，由于疏降地下水，引起的地面塌陷。为了研究灰岩水动力场规律，先后在该区进行多时段、多水平放水试验。研究表明，覆盖粘土层、岩溶及人工疏降地下水，是该地区岩溶塌陷形成的基本条件。通过对粘土盖层性质、疏降地下水岩溶塌陷演化过程及塌陷机理与对应阶段过程综合分析，结合区域地质条件，掌握了塌陷点的分布规律。对目前西部地区塌陷“复活”、整治及未来城市规划，提出了建设性建议。     

Geological controls on rock mass classification of coal from Huntly East Mine, New Zealand

Rock Mass Rating (RMR) measurements from 65 sites within Huntly East underground coal mine are presented. All measurements are in coal, for which the dominant discontinuities are vertical cleat. Basic RMR values using two discontinuity spacings are presented: overall RMR based on the average spacing of all individual discontinuities; and cleat zone RMR based on the average spacing between zones of cleat. Cleat orientations are highly variable, but on average approximately parallel horizontal stress axes (face cleat follows maximum horizontal stress axis, butt cleat follows minimum horizontal stress axis).Contours of RMR variations throughout the mine are used to compare rock mass conditions with geological structure. It is apparent that: (1) RMR is least within downthrown fault blocks, and particularly immediately on the downthrown sides of faults, and greatest in upthrown fault blocks; and (2) RMR contours parallel horizontal stress axes within fault-bounded blocks, and bend to parallel faults at block boundaries. From similar contours for parameters contributing to RMR, the Rock Quality Designation (RQD), groundwater rating, and discontinuity condition rating create most of the observed variations in RMR. RQD is determined from the measured discontinuity frequency and hence is a measure of the degree of fracturing of the rock mass. This is interpreted as influencing the groundwater and condition parameters directly by allowing greater water ingress. Discontinuity frequency is greatest (least spacing) in the immediate vicinity of faults, and in downthrown fault blocks, generating low RMR values. Within fault blocks RQD varies little, so RMR contours align with cleat orientations.As RMR contours, faults, stress field and cleat orientation are clearly interrelated, there is unequivocally a connection between RMR and structural geology; this allows some predictive capacity in terms of ground conditions. If geological features can be accurately defined through either drilling programs or seismic surveys, then ground conditions may be predicted before panels are driven.     

Magnetic fabrics and rock magnetism of Proterozoic dike swarm from the southern São Francisco Craton, Minas Gerais State, Brazil

Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10⁻³ (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR_0–30, pAAR_30–60 and pAAR_60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of K_max inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (K_max<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.