历史大地震断层滑动模型的建立及其对同震数值计算的影响——以1920年宁夏海原MS8.5大地震为例

大地震的发生会引起区域位移场和应力场发生变化,进而改变区域内及临近断层的应力状态和地震活动性.目前,研究学者可据已有的断层滑动模型来计算分析大地震同震应力变化,同时采用库仑应力触发理论来进一步分析震后余震分布和断层危险性.然而,历史上曾经发生过不少大地震,例如,1920年的海原M_S8.5大地震,是全球范围内少见的特大地震之一.局限于无确切的地震台站地震波等资料,前人在研究历史地震的影响时往往给出一些简单的断层滑动模型,将断层面上错动量视为均匀分布.为更准确地了解历史地震对后续地震的影响,基于前人研究和一般地震滑动形态分布规律及地震反射剖面等资料,以海原M_S8.5大地震为例,探讨了如何建立海原大地震断层滑动模型,并分别搭建了简单断层滑动模型和复杂断层滑动模型的全球同震横向不均匀并行椭球型地球模型.通过对海原M_S8.5地震的同震位移场和应力场的计算,发现采用复杂断层滑动模型比简单断层滑动模型地表位错分布更切合实际.同时,进一步计算和分析了此次大地震对青藏高原东北缘近100年历史地震和周围断层的应力触发作用,得出断层滑动模型对同震计算结果的影响集中在发震断层附近而对远场影响较小.     

Basement structural architecture and hydrocarbon conduit potential of polygonal faults in the Cooper‐Eromanga Basin,Australia

A thorough and complete understanding of the structural geology and evolution of the Cooper‐Eromanga Basin has been hampered by low‐resolution seismic data that becomes particularly difficult to interpret below the thick Permian coal measures. As a result, researchers are tentative to interpret the basement fault architecture within the basin, which is largely undefined. To provide a better understanding of the basement fault geometry, all available two‐dimensional seismic lines together with 12 three‐dimensional seismic surveys were structurally interpreted with assistance from seismic attribute analysis. The Upper Cretaceous Cadna‐owie Formation and top Permian reflectors were analysed using a common seismic attribute technique (incoherency) that was used to infer the presence of faults that may have otherwise been overlooked. Detailed basement fault maps for each seismic survey were constructed and used in conjunction with two‐dimensional seismic data interpretation to produce a regional basement fault map. Large north‐northeast–south‐southwest‐striking sinistral strike–slip faults were identified within the Patchawarra Trough appearing to splay from the main northeast–southwest‐striking ridge. These sinistral north‐northeast–south‐southwest‐striking faults, together with field‐scale southeast–northwest‐striking dextral strike–slip faults, are optimally oriented to have potentially developed as a conjugated fault set under a south‐southeast–north‐northwest‐oriented strike–slip stress regime. Geomechanical modelling for a regionally extensive system of Cretaceous polygonal faults was performed to calculate the Leakage Factor and Dilation Tendency of individual faults. Faults that extend into Lower Cretaceous oil‐rich reservoirs with strikes of between 060°N and 140°N and a high to near‐vertical dip angle were identified to most likely be acting as conduits for the tertiary migration of hydrocarbons from known Lower Cretaceous hydrocarbon reservoirs into shallow Cretaceous sediments. This research provides valuable information on the regional basement fault architecture and a more detailed exploration target for the Cooper‐Eromanga Basin, which were previously not available in literature.     

NEW EVIDENCES FOR LATE QUATERNARY ACTIVITY IN THE SOUTHERN SEGMENT OF THE YISHU-TANGTOU FAULT,THE TAN-LU FAULT ZONE,AND ITS TECTONIC IMPLICATION

The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration. Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F₄)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F₃)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F₃)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F₃)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault. Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F₃)can't be ignored.     

GEOMORPHOLOGY OF THE GYARING CO FAULT ZONAL DRAINAGE SYSTEM AND ITS STRUCTURAL IMPLICATIONS

Strike-slip faults and normal faults are dominant active tectonics in the interior of Tibetan plateau and control a series of basins and lakes showing extension since the Late Cenozoic, by contrast with the thrust faulting along the orogenic belts bordering the plateau. The late Neotectonic movement of those faults is key information to understand the deformation mechanism for Tibetan plateau. The Gyaring Co Fault is a major active right-lateral strike-slip fault striking~300° for a distance of~240km in central Tibet, in south of Bangong-Nujiang suture zone. The Gyaring Co Fault merges with the north-trending Xainza-Dinggye rift near the southern shore of Gyaring Co. From NW to SE, Dongguo Co, Gemang Co-Zhangnai Co, Zigui Co-Gyaring Co form the Gyaring Co fault zonal drainage basin. Some scholars have noticed that the formation of lakes and basins may be related to strike-slip faults and rift, but there is no analysis on the Gyaring Co fault zonal drainage basin and its response to regional tectonics. In recent years, a variety of quantitative geomorphic parameters have been widely used in the neotectonic systems to analyze the characteristics of the basin and its response mechanism to the tectonic movement. In this paper, we applied ASTER GDEM data on the ArcGIS platform, extracted the Gyaring Co fault zonal drainage basin based on Google Earth images (Landsat and GeoEye) and field work. We acquired basic geomorphic parameters of 153 sub-basin (such as grade, relief, average slope, area) and Hypsometric Index (HI) value and curve. Statistical results have indicated significant differences in scale(area and river network grade)in north and south sides of the fault. Southern drainage basins' relief, slope, HI value are higher than the northern basins, and the overall shape of hypsometric curve of northern basins are convex compared with southern concavity. Along the strike of the Gyaring Co Fault, average slope, and HI value are showing generally increasing trending and hypsometric curve become convex from west to east. By comparing and analyzing the lithology and rainfall conditions, we found that they have little influence on the basic parameters and HI value of drainage basins. Therefore, the changes of basin topographic differences between northern and southern side of fault and profile reveal the Gyaring Co Fault has experienced differential uplift since the late Cenozoic, southern side has greater uplift compared to the north side, and the uplift increased from NW to SE, thus indicate that normal faulting of the Gyaring Co Fault may enhanced by the Xainza-Dinggye rift. The early uplift of the Gangdise-Nyainqentanglha Mountain in late Cenozoic might provide northward inclined pre-existing geomorphic surfaces and the later further rapid uplift on the Gangdise-Nyaingentanglha Mountain and Xainza-Dinggye rift might contribute to the asymmetrical development of the Gyaring Co fault zonal drainage basin.     

A NEW FINDING OF SURFACE RUPTURE ZONES ASSOCIATED WITH THE 1936 LINGSHAN M6(3/4) EARTHQUAKE,GUANGXI, CHINA

On April 1, 1936, an M6(3/4) earthquake occurred on the Fangcheng-lingshan Fault. This event is the biggest historical earthquake on the coastal seismic zone, South China ever. But so far, no any findings about the surface rupture of this event have been reported. This paper is the first to find several intact surface rupture zones associated with the 1936 Lingshan seismic event, in the areas of Gaotang, Jiaogengping etc. on the northeast segment of the Fangcheng-Lingshan Fault. According to the field work, the surface rupture stretches to 10km and distributes along NE direction in front of Luoyang Mountain, represented by earthquake scarp, extensional fracture, dextrally faulted gully and river system etc. The characteristics of surface ruptures and faulted landforms indicate that the surface rupture is of normal-dextral strike slip faulting. The trenching on this fault exposed that at least three seismic events have been recorded, including two historical earthquake events and the latest one is the 1936 Lingshan M6(3/4) earthquake. These surface rupture zones are the key to the detection of seismogenic structure and the re-estimate of magnitude of this event. The new finding of these surface rupture zones would be particularly significant for the detection of the seismogenic structure of Lingshan M6(3/4) earthquake.     

含碳结构对龙门山断层带电导率影响的实验探索

碳是影响岩石电导率大小的一个重要因素,可能是造成龙门山断层带电导率异常的重要原因之一.为了研究不同的碳含量、矿物颗粒粒径与碳晶体结构对断层带电导率的影响,在干燥、常温、0.2~300 MPa的压力条件下实验研究了人工模拟断层泥样品(石英粉末与含碳粉末混合的样品,简称模拟样品)和采自映秀-北川断层八角庙剖面的天然断层岩样品(简称天然样品)的电导率.实验结果显示,当模拟样品中的含碳粉末连通时,电导率与碳体积率的关系符合逾渗理论模型;而含碳粉末未连通时,电导率随总孔隙度降低而指数性升高.同时模拟样品的电导率也随石英颗粒粒径的变化而发生改变.相比于模拟样品中的含碳粉末主要分布于石英颗粒支撑的孔隙中,天然样品中的碳则主要以碳膜的形式赋存在颗粒边缘,导致碳体积率相同的条件下,模拟样品的电导率小于天然样品.此外,天然样品的电导率(9×10~(-4)S·m~(-1))也要小于野外大地电磁探测的结果(0.03~0.1 S·m~(-1)).在今后的实验中还需要考虑在动态摩擦条件下对含有完整含碳结构的天然样品进行电导率的实验研究.     

四川瀑布沟地区断裂破碎带的物质成分与断裂活动年代

本文主要研究断层泥中新生的粘土矿物特征,并研究断层泥中石英碎砾表面溶蚀的显微形貌结构特征。粘土矿物以X-射线衍射分析为主,石英碎砾则利用扫描电子显微镜对其显微形貌结构进行分析,并根据石英表面溶蚀的形貌特征来探讨断裂活动的相对年代     

PRELIMINARY STUDY OF PALEOEARTHQUAKES ON THE MIDDLE-EASTERN SEGMENT OF JINTA NANSHAN FAULT

Hexi Corridor is located at the northeastern margin of the Tibetan plateau. Series of late Quaternary active faults are developed in this area. Numerous strong earthquakes occurred in history and nowadays. Jinta Nanshan fault is one of the boundary faults between the Qinghai-Tibet block and the Alxa block. The fault starts from the northwest of Wutongdun in the west, passes through Changshan, Yuanyangchi reservoir, Dakouzi, and ends in the east of Hongdun. Because the Jinta Nanshan fault is a new active fault in this region, it is important to ascertain its paleoearthquakes since late Pleistocene for the earthquake risk study. Previous studies were carried out on the western part, such as field geomorphic investigation and trench excavation, which shows strong activity in Holocene on the western segment of Jinta Nanshan fault. On the basis of the above research, in this paper, we carried out satellite image interpretation, detailed investigation of faulted landforms and differential GPS survey for the whole fault. Focusing on the middle-eastern part, we studied paleoearthquakes through trench exploration on the Holocene alluvial fan and optical luminescence dating. The main results are as follows:Early Pleistocene to late Pleistocene alluvial strata are widely developed along the fault and Holocene sediment is only about tens of centimeters thick. The Jinta Nanshan fault shows long-lasting activity since late Quaternary and reveals tens of centimeters of the lowest scarp which illustrates new strong activity on the middle-east segment of this fault. Since late Pleistocene, 4 paleoearthquakes happened respectively before(15.16±1.29) ka, before(9.9±0.5) ka, about 6ka and after(3.5±0.4) ka, revealed by 4 trenches, of which 2 are laid on relatively thicker Holocene alluvial fan. Two events occurred since middle Holocene, and both ruptured the whole fault.     

THREE-DIMENSIONAL DEFORMATION CHARACTERISTICS OF THE XIANSHUIHE FAULT ZONE

In order to analyze 3-dimensional movement and deformation characteristics and seismic risk of the Xianshuihe fault zone, we inverted for dynamic fault locking and slip deficit rate of the fault using the GPS horizontal velocity field of 1999-2007 and 2013-2017 in Sichuan-Yunnan region, and calculated annual vertical change rate to analyze the vertical deformation characteristics of the fault using the cross-fault leveling data during 1980-2017 locating on the Xianshuihe fault. The GPS inversion results indicate that in 1999-2007, the southeastern segment of the fault is tightly locked, the middle segment is less locked, and the northwestern segment is basically in creeping state. In 2013-2017, the southeastern segment of the fault is obviously weekly locked, in which only a patch between Daofu-Bamei is locked, and the northwestern segment is still mostly in creeping state, in which only a patch at southeastern Luhuo is slightly locked from surface to 10km depth. The cross-fault leveling data show that annual vertical change rate of the Zhuwo, Gelou, Xuxu and Goupu sites on the northwestern segment is larger, which means vertical movement is relatively active, and annual vertical change rate of the Longdengba, Laoqianning, and Zheduotang sites on the southeastern segment is small, which means the fault is locked, and the vertical movement changes little before and after the Wenchuan earthquake. Combining with the 3-dimensional movement and deformation, seismic activity and Coulomb stress on the Xianshuihe Fault, we consider the seismic risk of the southeastern segment is larger, and the Wenchuan earthquake reduced the far-field sinistral movement and the fault slip deficit rate, which may reduce the stress and strain accumulation rate and relieve the seismic risk of the southeastern segment.     

TECTONIC INDICATIONS OF OCCURRENCE OF MODERATE-TO-STRONG EARTHQUAKES IN CHAOHU-TONGLING AREA,ANHUI PROVINCE

The Chaohu-Tongling area in Anhui Province is a typical moderate-to-strong earthquake active area in the mainland of China. Four earthquakes occurred in this area, displayed as a NNE-trending zonal distribution, including the 1585 M5(3/4) Chaoxian earthquake and the 1654 M5(1/4) Lujiang earthquake, which formed a striking moderate-to-strong seismic activity zone. Field survey, shallow geophysical prospecting, drilling data, collection and dating of chronology samples and comprehensive analysis of fault activity indicate that the Fanshan, Xiajialing and Langcun faults are not active since Quaternary. The NNE-trending Tongling Fault is a buried middle-Pleistocene fault, but it can produce moderate-to-strong earthquakes and control the evolution and development of three en echelon geologic structures. The intensity of the four earthquakes is characterized by southward progressive decrease, which is in accordance with the characteristics that the subsidence range of Wuwei Basin is obviously larger than that of Guichi Basin to its south since late Cenozoic. In terms of deep structure, the characteristics of spatial distribution of Tongling Fault indicate that it corresponds to a NNE-striking Bouguer gravity anomaly gradient belt. So there is a spatial correspondence between the middle-Pleistocene Tongling Fault, the en echelon structures, the differential movement of the neotectonics, the Bouguer gravity anomaly gradient belt and the moderate-to-strong seismic activity belt in the Chaohu-Tongling area, indicating that they should be the tectonic indications of occurrence for moderate-to-strong earthquakes.