鄂西北许家坡金银矿床地质地球化学特征及成因分析

通过对区域地质、矿床地球化学特征及同位素测年等资料的研究分析,提出许家坡金银矿床受武当山(岩)群及武当隆起—滑脱构造和武当逆冲推覆构造的控制,表现出地层和构造控矿的双重性,其成矿因素比较复杂,成矿物质主要来源干深部,成矿热液主要属变质热液型中—低温热卤水,矿床成因为中—低温热液型矿床。     

渤海湾盆地区燕山期构造特征与原型盆地

结合近几年来渤海湾盆地区深层地震勘探与解释的成果，重点论述了渤海湾盆地区燕山期构造特征与盆地原型，提出燕山期构造变形样式总体在纵向上可分为三个构造层，分别称为上部、中部和下部；横向上总体可分为三个构造带，西部为向西逆冲的薄皮逆冲带，中部为冲断—走滑带，东部为厚皮褶皱—冲断带，主体由两期挤压方向皆为NW—SE向的褶皱—逆冲变形形成；并将其演化分为三个阶段：燕山早期、燕山中期和燕山晚期。但是，渤海湾盆地区燕山期的构造变形特征和原型盆地有所变化，其空间上的差异是基底构造格局及其空间差异叠合的结果。综合其它研究结果还表明，渤海湾盆地区燕山期构造是在西太平洋大陆边缘弧的挤压构造背景下，陆内壳下拆沉和壳内挤出逃逸构造的综合动力作用下形成的。     

Late Caledonian Ductile Thrusting Deformation in the Central East Kunlun Belt, Qinghai, China and Its Significance: Evidence from Geochronology

A high-angle ductile thrusting deformation with top-to-the-north movement penetratively developed in the Proterozoic-Early Paleozoic metamorphic rocks along the Central East Kunlun belt. The deformed rocks suffered epidote-amphibolite facies metamorphism. On the basis of our previous study, we present more data in this paper to further support that the ducdle thrust deformation occurred in the later Caledonian and more detailed information about the deformation. A zircon U-Pb concordant age of 446±2.2 Ma of a deformed granodiorite in the ductile thrust zone was obtained and can be interpreted as the lower limit of the deformation. A syntectonically crystallized and also strongly deformed hornblende Ar/ Ar dating gives an Ar/Ar plateau age of 426.5±3.8 Ma, which represents the deformation age. A strongly orientated muscovite gives an Ar/Ar plateau age of 408±1.6Ma, representing the cooling age after the peak temperature, constraining the upper limit of the ductile thrust deformation. This ductile thru     

内蒙地轴南缘盖层中逆冲断层的样式及形成机制

内蒙地轴南缘盖层中,发育了多种样式的逆冲断层,如叠瓦式、背冲式、对冲式和楔冲式.这些逆冲断层都发育在基底断裂控制的断陷盆地边缘,并向盆内逆冲。形成发育的过程是:区域拉伸、基底断裂活动和断陷盆地发育→区域挤压、盆缘逆冲断层发育→盆缘进一步隆起、逆冲断层进一步发育。所以区域拉伸和挤压、断陷盆地的发育和盆缘逆冲断层的活动三者密切相关。逆冲作用主要发生于燕山运动时期。     

An unusual zone of seismic coupling in the Bonin arc: The 1972 Hachijo-Oki earthquakes and related seismicity

The 1972 February and December Hachijo-Oki earthquakes (M _s=7.3 and 7.4), in the northernmost part of the Izu-Bonin subduction zone, are the only major events (M _s>7.0) in the Bonin arc for the past 80 years. Relocation of the hypocenters, using one smaller event having a wellconstrained focal depth as a master event, shows that the depth of the February event is 10 km shallower than that of the December event. We have determined the rupture process for both events by minimizing the error in waveform between observed and synthetic seismograms. Although the number of available stations are limited, the depth range of the major energy release for the December event extends deeper than for the February one. The rupture propagated up-dip for both events. It is likely that the rupture zone of the two events overlapped, and that the December event ruptured the deeper part. This suggestion is consistent with the observation that the aftershock zones of both events overlap with that of the December event shifted landward. The waveforms of the December event have a smaller high frequency component than those of the February event, suggesting that the stress at the thrust zone became more uniform or reduced after the February event.No thrust type smaller event occurred near the rupture zone. Instead, theP-axes of smaller events are parallel to the dip of the slab and theirT-axes dip to the southwest. Focal depths of these events estimated byP-wave forward modeling are generally between 40–50 km and located beneath the thrust zone. We thus interpret them as the events within the Pacific slab near the zone ruptured by the two major events. The stress concentration around the rupture zone of the major events is suggested to have triggered these slab events. After the occurrence of the large events, the slab events are concentrated near the deeper portion of the rupture zone. These events may have been caused by the loading of the down-dip compressional stress near the down-dip end of the rupture zone due to the rupture. The occurrence of the doublet of large earthquakes and a number of down-dip compressional events beneath their rupture zones in a shallow portion of the subducting slab indicates an unusual zone of seismic coupling in the Bonin arc, most of which is seismically quiescent.     

Geodetic and geological evidence of active tectonics in south-western Sicily (Italy)

Integrated geological, geodetic and marine geophysical data provide evidence of active deformation in south-western Sicily, in an area spatially coincident with the macroseismic zone of the destructive 1968 Belice earthquake sequence. Even though the sequence represents the strongest seismic event recorded in Western Sicily in historical times, focal solutions provided by different authors are inconclusive on possible faulting mechanism, which ranges from thrusting to transpression, and the seismogenic source is still undefined. Interferometric (DInSAR) observations reveal a differential ground motion on a SW–NE alignment between Campobello di Mazara and Castelvetrano (CCA), located just west of the maximum macroseismic sector. In addition, new GPS campaign-mode data acquired across the CCA alignment documents NW–SE contractional strain accumulation. Morphostructural analysis allowed to associate the alignment detected through geodetic measurements with a topographic offset of Pleistocene marine sediments. The on-land data were complemented by new high-resolution marine geophysical surveys, which indicate recent contraction on the offshore extension of the CCA alignment. The discovery of archaeological remains displaced by a thrust fault associated with the alignment provided the first likely surface evidence of coseismic and/or aseismic deformation related to a seismogenic source in the area. Results of the integrated study supports the contention that oblique thrusting and folding in response to NW–SE oriented contraction is still active. Although we are not able to associate the CCA alignment to the 1968 seismic sequence or to the historical earthquakes that destroyed the ancient Greek city of Selinunte, located on the nearby coastline, our result must be incorporated in the seismic hazard evaluation of this densely populated area of Sicily.     

南天山造山带中段推覆体内部变形及其与逆冲构造的关系

南天山造山带是古生代期间塔里木板块与伊犁—伊塞克湖板块对接、碰撞的产物 ,主体由向南逆冲的推覆体组成。推覆体内部变形构造在垂直于主断面方向上呈规律性变化。从推覆体底部向上 ,褶皱从 A型褶皱 ,紧闭、等斜的 B型褶皱 ,前翼褶皱经斜歪、倒转褶皱渐变为对称的尖棱或箱状 B型褶皱 ;构造面理从发育主断面近平行的 S-面理及剪切滑移的 C-面理渐变为只发育与主断面近垂直的 D-面理。据此 ,可把推覆体自下而上划分成为递进剪切、过渡和等轴挤压三个变形域。变形过程分析表明 ,存在水平挤压变形和随后的简单剪切变形两个变形阶段 ,前者发育于主断裂面形成之前 ,后者发育于主断裂面形成之后。这指示南天山造山带以变形扩展速率高于断裂扩展速率为特征     

顶管施工引起的土体垂直变形计算方法研究

对前人工作进行总结,将3个已有的经验公式合并成一个通用经验公式,该公式可以计算由土体损失引起的土体中任一点沉降。假定土体不排水,利用弹性力学的Mindlin解推导了顶管正面附加推力、掘进机和后续管道与土体之间的摩擦力引起的土体垂直变形计算公式。结合土体损失引起的土体变形计算公式,得到顶管施工引起的总的土体垂直变形计算公式,该方法适用于施工阶段。算例分析表明,正面附加推力引起开挖面前方地面隆起,后方地面沉降,以开挖面正上方为轴线呈反对称分布,在正常施工时产生的地面变形较小;掘进机和后续管道与土体之间的摩擦力引起的地面变形分布规律与正面附加推力相似,轴线分别位于掘进机中间部位和后续管道中间部位的正上方。     

The Uplift of the Longmenshan Thrust Belt and Subsidence of the West Sichuan Foreland Basin

Based on fission track dating of apatite, and measurement of vitrinite reflectance of rock samples from the Longmenshan (Longmen Mountain)area and the West Sichuan foreland basin and computer modelling it is concluded that (l)the Songpan-Garze fold belt has uplifted at least by 3-4 km with an uplift rate of no less than 0.3-0.4 mm/a since 10 Ma B.P.; (2) the Longmenshan thrust nappe belt has uplifted at least by 5-6 km with an uplift rate of more than 0.5- 0.6 mm /a since 10 Ma B.P.; (3) the Longmenshan detachment belt has uplifted by 1 - 2 km at a rate of 0.016-0.032 mm/a since 60 Ma B.P.; (4) the West Sichuan foreland basin has uplifted by 1.7-3 km at a rate of 0.028-0.05 mm/a since 60 Ma B.P.; (5) the uplift rate of the area on the west side of the Beichuan-Yingxiu-Xiaoguanzi fault for the last 10 Ma is 40 times as much as that on its east side; (6) the uplifting of the the Songpan - Garze fold belt and the subsidence of the West Sichuan foreland basin 60 Ma ago exhibit a mirro-image correlation, i.e     

库车坳陷克深气田致密砂岩储层构造裂缝形成序列与分布规律

综合采用岩心、薄片和成像测井等资料,对库车坳陷克深气田白垩系巴什基奇克组构造裂缝的形成序列、分布规律和影响因素进行了研究。结果表明:剪切裂缝和张性裂缝在克深气田均有发育,以直立缝和高角度缝为主,主要形成于近南北向的挤压作用、背斜弯曲拱张作用和异常流体高压作用,微观裂缝切穿胶结物和部分颗粒,早期充填构造裂缝可在后期构造应力和异常流体高压作用下重新裂开成为有效裂缝。克深气田发育3期构造裂缝,其中第3期构造裂缝的形成时间与天然气大量充注期吻合,是工业规模性气藏形成的关键因素。单个断背斜高部位的构造应力低于背斜翼部,因此背斜高部位的构造裂缝线密度相对较低,但背斜弯曲变形使裂缝开度较大,有效性好,单井的无阻流量较高;翼部和断层附近构造裂缝线密度较大,但开度较小,有效性差;构造应力、岩石强度和变形时间的不同造成了构造裂缝特征在各气藏之间具有差异性。储层中部第3砂层组的构造裂缝发育程度中等,充填程度相对较低,并且平面上分布连续,可形成连片分布的储层"甜点"区,应成为克深气田开发中的重点层位。对克深气田构造裂缝起主要贡献作用的为水下分流河道和河口坝微相的粉-细砂岩。