Temporal variation of soil erosion resistance on sloping farmland during the growth stages of maize (Zea mays L.)

Maize growth has great effects on soil properties and thus likely induces the changes in soil erosion resistance on sloping farmland. However, temporal variation of soil erosion resistance during the growth stages of maize is still unclear in the mountainous yellow soil area where maize is the dominant crop. In this study, four maize plots (MP) and four bare land plots (CK) were conducted to investigate soil erosion resistance, and multiple indicators of soil erosion resistance were measured including the total soil anti-scourability (TAS), mean weight diameter (MWD), soil erodibility K factor and soil shear strength (SH). A comprehensive soil erosion resistance index (CSERI) was employed to quantify the temporal variation of soil erosion resistance during the growth stages of maize (seedling stage, SS; jointing stage, JS; tasselling stage, TS; maturing stage, MS). The results showed that TAS, MWD, SH increased significantly with maize growth and SH decreased when at MS. But K factor decreased significantly over time. CSERI increased significantly during the growth stages of maize and the CSERI of JS, TS, MS increased on average by 74.72, 180.68 and 234.57% than that of SS. Compared to CK, CSERI of MP increased by 49.90, 66.82, 55.60 and 38.61% during the growth stages of maize. The temporal variation of soil erosion resistance was closely related to the changes in maize cover, maize roots and soil organic carbon. The findings demonstrated that it is necessary to consider the temporal variation of soil erosion resistance in the mountainous yellow soil area.     

仿生高效切削齿试验研究

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。     

新型抗高温二次交联凝胶堵漏材料的研制

针对普通凝胶抗温能力较差难以适用于高温地层堵漏作业的问题,通过设计合成抗高温凝胶主剂GN-1并运用二次交联技术,研发了新型抗高温凝胶堵漏材料。优选配方为：淡水+1.5%GN-1+0.15%地面交联剂+1%井下交联剂+0.2%抗氧化剂。通过热滚老化与高温流变测试相结合的手段对凝胶抗温能力进行评价。结果表明,该凝胶材料具有良好的热稳定性,在180 ℃下老化24 h后,7.34 s-1下剪切粘度＞10000 mPa?s。大幅加重后180 ℃老化24 h仍能保持较好的粘弹性。此外还考察了不同温度和pH值下的成胶性能以及与聚磺钻井液体系的配伍性,为抗高温凝胶堵漏材料在现场的应用奠定基础。     

Application of multi-seismic attributes analysis in the study of distributary channels

During the exploration of stratigraphic reservoirs, the key to locating these reservoirs is to identify the sandstone distribution. Seismic data can be used to recognize large-scale distributary-channel sedimentary bodies; however, depiction of sedimentary bodies in small distributary channels using traditional interpretation data from seismic profiles is extremely difficult. In the Upper Cretaceous first sandstone bed of the third member of the Nenjiang Formation (called the Nen 3 member for simplicity) in the XB area of the southern Songliao basin, distributary channels are the main sedimentary facies. The distributary channels migrate frequently; therefore, it is difficult to precisely depict the morphology of the channel and the distribution of sandstone. In this study, we investigated the deposition of distributary channels using equal-scale formation plane seismic attributes such as post-stack amplitude, instantaneous amplitude and seismic waveform classification, analyzed well logging data from target formations, and mapped the distribution of distributary channels. This study shows that seismic sedimentological study and stacking multiple attribute analysis can identify the distribution of distributary channels precisely and effectively. The attributes of equal-scale strata slices are evidently superior to those of time and horizon slices; Attribute extraction and selection of equal-scale formation slices is an essential step. The comprehensive selection of seismic attributes that show a good correlation to a single-well can be used to clearly depict channel bodies. The overlap of the 40-Hz single-frequency energy and the RMS amplitude depicts the sedimentary characteristics and shapes of sandstone bodies in main channels as well as small-scale distributary channels more clearly than a single attribute. These attributes show that the first sandstone bed of the Nen 3 member was from distributary channels with complex shapes. The distributary channels cut across each other vertically and laterally. It indicates that, during the deposition of the Nen 3 member in XB area, the direction of the main channel is from north to south, and the provenance could be from north and east. The method of this paper may provide some helpful suggestions to the geologist using seismic attributes to undertake research on sedimentary environment at other places in the world.     

沟岸侧蚀对泥石流不稳定动力过程的影响

泥石流作为非牛顿体,屈服应力大,运动过程通常不稳定。前人建立了许多模型来研究沟床揭底和堰塞体溃决对泥石流不稳定动力过程的影响,沟岸侧蚀对泥石流不稳定动力过程的影响研究较少。通过侧蚀为主的模型和完全底蚀的模型两种水槽实验的对比,针对泥石流的动力过程展开研究。实验发现两种工况条件下泥石流正应力和孔隙水压力随着龙头高度沿程波动性的增长而相应地波动性增大,但侧蚀作用使得这种波动特征更加明显。通过力学分析,证明侧蚀作用导致泥石流龙头的阻力更大,但是龙身颗粒和龙头颗粒的速度差更大,使得龙头附加坡降更大,因此,侧蚀作用使得泥石流龙头的平均速度更快。泥石流龙头浓度和容重的不断增大,使得阻力不断增大,阻力和动力的动态平衡关系是泥石流不稳定运动的原因之一。     

六种成膜封堵剂的室内实验优选与评价

为更好地服务深部钻探工程,准确了解冲洗液封堵性能,对6种成膜封堵剂开展了砂床实验、API静失水量实验、流变性能实验及抗温实验等室内实验进行优选与评价。实验结果表明,2号和4号成膜封堵剂在6种成膜封堵剂中封堵性能最好,它们在基浆中的最优加量均为2%,100 ℃温度条件下加入这2种封堵剂的冲洗液具有较好的抗温性能;冲洗液中膨润土含量和处理剂是影响冲洗液封堵性能的2个重要因素：膨润土含量越高,冲洗液封堵性能越好,加入聚合物、降滤失剂等处理剂可以提高冲洗液的封堵性能。砂床实验是评价冲洗液封堵性能好坏的重要依据。     

成层软土地基预固结处理后桩基水平承载力估算方法

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。     

异形柱抗震性能分析

异形柱框架结构是1种新型节能住宅结构,本文利用有限元软件,采用反应谱方法,从异形柱与矩形柱框架结构在地震作用下的变形特性和位移着手,研究2种结构的抗震性能,得出了异形柱的抗震性能好的结论。     

阻尼器连接填充墙在柔性框架结构中的应用研究

阻尼器连接填充墙采用黏滞阻尼器与主体框架结构连接,是一种新型填充墙与框架的柔性连接方式,能满足柔性框架结构的大变形需求.为使得阻尼器连接填充墙达到最优的力学性能,结构布置和构件力学参数的选择十分重要,采用有限元软件ABAQUS分别建立了柔性钢框架结构和阻尼器连接填充墙-框架结构的有限元模型,考察不同阻尼系数阻尼器连接填...     

地震作用对琼州海峡海缆路由区海底稳定性影向的分析

以琼州海峡的北海—临高段海缆路由为例,利用计算对比的方法,分析了地震作用下,路由区3m以浅海底土液化或滑移的可能性,评价了路由区海底的稳定性。结果发现,在地震烈度为Ⅶ度的地震作用下,砂性土海底的地震剪应力平均值(0.86kPa,1.72kPa和2.57kPa)小于砂性土的液化剪应力(1.60kPa,3.20kPa和4.81kPa);粘性土海底的地震剪应力平均值(1.25kPa,2.49kPa和3.74kPa)小于粘性土的抗滑剪应力平均值(4.07kPa,4.61kPa和4.49kPa),路由区海底稳定性良好;在地震烈度为Ⅷ度的地震作用下,砂性土海底的地震剪应力平均值(1.73kPa,3.45kPa和5.12kPa)大于砂性土的液化剪应力;粘性土海底的地震剪应力平均值(2.49kPa,4.98kPa和7.47kPa)除表层外,大于粘性土的抗滑剪应力,路由区海底会发生失稳破坏。