Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.     

渤海海峡跨海通道建设对城市经济联系的影响分析

渤海海峡跨海通道建设将极大改变环渤海乃至整个东部沿海的交通格局,势必对其目标城市大连、烟台带来直接的经济影响,同时也会对辽东半岛、山东半岛乃至东北、华北和华东不同尺度地区的经济联系产生深远影响。文章选取山东省17个和辽宁省14个地级市的地区的生产总值、城市人口以及城市间的最短时间距离等指标,测度渤海海峡跨海通道建成前后,对山东、辽宁两省区域城市经济联系的影响。研究表明:渤海海峡跨海通道建成后,对大连、烟台间的经济联系强度有显著提高,各城市经济联系度的平均增幅明显不同;同时,受距离衰减规律的影响,两省的城市分别以大连、烟台为中心,根据距离远近及城市自身发展程度分为4个层次,经济联系强度由内向外逐层次减弱;从整体上看,渤海通道的建设对带动两省城市之间的经济联系度都有大幅度提升。     

A comparison of the main methods for estimating probabilities of extreme still water levels

Sea-level return periods are estimated at 18 sites around the English Channel using: (i) the annual maxima method; (ii) the r-largest method; (iii) the joint probability method; and (iv) the revised joint probability method. Tests are undertaken to determine how sensitive these four methods are to three factors which may significantly influence the results; (a) the treatment of the long-term trends in extreme sea level; (b) the relative magnitudes of the tidal and non-tidal components of sea level; and (c) the frequency, length and completeness of the available data. Results show that unless sea-level records with lengths of at least 50 years are used, the way in which the long-term trends is handled in the different methods can lead to significant differences in the estimated return levels. The direct methods (i.e. methods i and ii) underestimate the long (> 20 years) period return levels when the astronomical tidal variations of sea level (relative to a mean of zero) are about twice that of the non-tidal variations. The performance of each of the four methods is assessed using prediction errors (the difference between the return periods of the observed maximum level at each site and the corresponding data range). Finally, return periods, estimated using the four methods, are compared with estimates from the spatial revised joint probability method along the UK south coast and are found to be significantly larger at most sites along this coast, due to the comparatively short records originally used to calibrate the model in this area. The revised joint probability method is found to have the lowest prediction errors at most sites analysed and this method is recommended for application wherever possible. However, no method can compensate for poor data.     

层式滤波隔震垫

根据震相图展示的地震波运动规律,利用滚动摩擦阻力只相当滑动摩擦阻力1／40～1／60的力学效应,将轴承钢球呈层状重叠组合成隔震垫,可获得重复滤波效果,能高效降低地震对房屋建筑的作用力,达到提高地震安全度,降低建筑成本、节约建筑资源的目的。     

基于孔压静力触探(CPTU)测试的连云港海相粘土前期固结压力确定方法研究

首先回顾了基于孔压静力触探(CPTU)测试确定前期固结压力的方法,通过连云港海相粘土场地进行的CPTU试验资料,以室内固结试验得到的前期固结压力作为参考值评估了经验方法预测前期固结压力的有效性。最简单的方法是直接建立前期固结压力和净锥尖阻力的关系,同时也是最有效的方法。     

论直流激发极化法的视电阻率参数

直流激发极化法,计算视电阻率的一次场采集于供电方波的末端时间,从而包含了被激发形成的二次场。在高极化率地质体上,得到的视电阻率将削弱其低阻特性或放大高阻特性。为此,建议在野外工作中,应对所采集的一次场作适当的处理后,再计算视电阻率,以降低这种影响。     

Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.     

输水管网模糊地震可靠性的 Monte Carlo 法分析程序

本文详细介绍了笔者所建议的运用模糊图理论和方法进行城市输水管网的地震可靠性分析途径和计算程序。对于输水管网中每段管道的震害预测,建立了相应的专家系统。在此基础上,定义了管网系统的模糊可靠性,更好地反映了人们对于管道损坏状态估计的模糊性和对可靠性要求上的模糊性。以模糊矩阵来描述输水管网的状态是十分方便的。通过计算模糊矩阵的传递闭包,极易找出最短路、关键段等。由于地震作用和管道抗震能力都是随机的,因此整个管网系统的可靠性分析是藉助Monle Carlo法进行的。以Monle Carlo法对模糊图进行分析,从而得到管网的地震可靠性,这还是首次。用PASCAL和PROLOG编制了在微机上实用的计算机程序,特别是以智能语言PROLOG编制的程序,更有许多特色。由于采用了一些技巧,使在微机上可以分析相当大的系统,为城市抗震防灾工作提供了一个有力的工具。     

Shear resistance of jointed rock masses and stability calculation of rock slopes

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.