伊通盆地鹿乡断陷C区块含油饱和度与含油性分析

综合研究伊通盆地鹿乡断陷双二段储层的岩性、含油性和含油饱和度,确定了适用于本区的含油饱和度计算方法,并与实际含油性进行了对比,分析了沉积和构造对含油性的影响。研究区双二段含油储层的岩性以粉砂岩、细砂岩和砂砾岩为主,含油级别为荧光级以上。根据阿尔奇公式计算出的含油饱和度大部分与实际的含油性相符合,并将含油饱和度70%、50%和38%值作为本区气层、油层、油水层和水层的区分标准。本区储层的含油性受到沉积和构造两方面的控制,沉积作用主要控制储层的岩石结构和物性,构造控制油气的聚集,即在构造高部位,实际含油饱和度比计算结果要高,而在构造低部位,实际含油饱和度比计算结果要低。     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

The diagenetic history of Oligocene-Miocene sandstones of the Austrian north Alpine foreland basin

Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC.     

Controls on reservoir heterogeneity of tight sand oil reservoirs in Upper Triassic Yanchang Formation in Longdong Area,southwest Ordos Basin,China: Implications for reservoir quality prediction and oil accumulation

Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively.     

Does compaction-induced subsidence control accommodation space at the top of prograding carbonate platforms? Constraints from the numerical modelling of the Triassic Esino Limestone (Southern Alps,Italy)

The demise of the high-relief, steep-slope, prograding Ladinian-Early Carnian carbonate platforms of the Esino Limestone (Central Southern Alps of Italy) is marked by subaerial exposure of the platform top associated with different erosional (mainly karst-related), depositional and diagenetic processes (Calcare Rosso). The exposure-related deposits consist of three major facies associations: 1) residual soils with thin lenses of conglomerates with black pebbles, and, locally, weathered vulcanites; 2) chaotic breccia lenses irregularly distributed in the uppermost part of the Esino Limestone carbonate platform, interpreted as collapse breccias in karstic setting: 3) inter-supratidal carbonate cycles with dissolution and development of paleosols and tepee structures.Facies distribution follows the sub-environments of the underlying Esino Limestone. Facies 1 and 2 typically characterize the core of the platform, covering the underlying inner platform facies. Facies 3 instead develops toward the edge of the platform, above reef-upper slope facies of the prograding facies of the Esino Limestone. The thickness of facies 3 decreases toward the core of the platform. Facies distribution reflects differences in the accommodation space and sedimentary processes from the rim (highest accommodation, favouring the deposition of peritidal-supratidal carbonates) to the core (reduced accommodation, causing pedogenesis and karstification) of the carbonate system.The observed thickness changes may be controlled by different factors: 1) syndepositional tectonics, 2) subsidence induced by magmatic activity or 3) differential subsidence controlled by the stratigraphic architecture of the Esino Limestone platform and adjoining basins. As evidence of tectonics was not observed and the presence of volcanic bodies is only documented tens of km away from the study area, the scenario involving the creation of accommodation space by compaction of the basinal sediments (resedimented, fine-grained calciturbidites) during the progradation of the carbonate platform is here investigated. Numerical modelling was performed to verify the compatibility of compaction-induced subsidence with the observed depositional architecture. The models were built to simulate the architectural evolution of the platform by progressively adding layers from deepest to shallowest, while compacting the underlying sediments, in order to evaluate compaction-induced subsidence (and accommodation space for the Calcare Rosso) after the deposition of the youngest platform strata. Modelling results allow us to conclude that the wedge geometry of the Calcare Rosso, deposited on top of the extinct Esino carbonate platform, can be explained by subsidence controlled by compaction of the basinal sediments present below the early-cemented, fast prograding platform slope deposits.     

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。     

碳酸盐台地的类型、特征和沉积模式--兼论华北地台寒武纪陆表海-淹没台地的沉积样式

随着对现代碳酸盐沉积环境的系统调查和解释、以及对碳酸盐沉积原理认识的深化,自20世纪60年代,一系列碳酸盐沉积相模式得以建立,其中最引人注目的是Wilson和Tucker的工作。但在镶边陆棚及缓坡模式得到了广泛认可和使用的同时,对陆表海和淹没台地型沉积未能予以足够的重视。与过去相比,现今的海平面是相对较低的,因而没有出现陆表海广泛发育的情况。但在漫长的地质历史时期,陆表海曾经覆盖了广泛的克拉通区域,是碳酸盐沉积最重要的场所之一。本文在系统总结前人成果的基础上,将用于描述大尺度碳酸盐岩沉积环境的碳酸盐台地分为镶边陆棚、缓坡、陆表海、孤立台地和淹没台地5种类型分别描述,并重点强调了陆表海和淹没台地的沉积模式。华北地台寒武系大面积分布的潮坪沉积、鲕粒滩相灰岩和竹叶状风暴砾屑灰岩,以及频繁出现的台地淹没事件,为阐明陆表海和淹没台地的沉积提供了绝佳实例。这些实例和研究表明了碳酸盐沉积环境的多样性和沉积过程的复杂性,以及将今论古的困难性,从而为碳酸盐沉积原理的认识和沉积环境的解释提供新认识和新思路。     

碳酸盐岩铸体薄片面孔自动提取研究

岩石孔隙是储层储集油气的重要场所,通过铸体薄片进行岩石孔隙结构分析对储层质量评价具有重要意义。碳酸盐岩孔隙结构较为复杂,铸体薄片图像中存在大量噪声和干扰因素,致使常规方法面孔提取效果不佳,因此本文引入一种多阈值铸体薄片面孔自动提取方法（ctsPore方法）进行孔隙区域提取和面孔率估计,方法综合利用HSV色彩空间中不同参数提取孔隙区域。本文针对碳酸盐岩储层的特点确定了一套ctsPore阈值参数,以解决溶蚀孔与噪声易混淆的问题。实验以伊拉克A油田中新统 Asmari组A段碳酸盐储层为例对所使用算法进行了效果检验。算法精度和效率分析实验表明,基于ctsPore方法的碳酸盐岩铸体薄片面孔提取误差小于0.24%。全井段铸体薄片分析结果表明,A段储层面孔率范围主要分布在6%~8%,储层较为致密,从上到下A1~A3小层的储层平均面孔率分别为6. 9%、11.7%、5.4%,与储层物性、沉积微相和岩性等纵向分布规律较为吻合。     

Chemical oceanographic influences on sediment accumulations of a carbonate ramp: Holocene Yucatan Shelf,Mexico

Global controls on the oceanographic influences on the nature of carbonate factories are broadly understood. The details of the influences of changes in temperature and nutrients across individual carbonate shelves are less well constrained, however. This study explores spatial and temporal variations in chemical oceanography along and across the Yucatan Shelf, a modern carbonate ramp, and how these factors relate to variable bottom character, sediment and sediment geochemistry. In‐situ sensors and remote‐sensing data indicate the sporadic presence of cool, upwelled water with low dissolved oxygen and elevated Chlorophyll‐a. This current‐driven, westward flow of upwelled water is most evident in a zone just offshore of the northern peninsular shoreline, but its influence wanes ca 75 km offshore and as the shore turns southward. The impacts of this water mass include a transitional photozoan–heterozoan assemblage with biosiliceous components, relict grains and common thin Holocene sediment accumulations nearshore; further offshore are coralgal reefs and expansive sand plains. Geochemical proxies of bulk sediment, including high δ¹⁸O and elevated HREE/LREE (heavy rare‐earth element/light rare‐earth element) ratios near, and downcurrent of, the upwelling source, are interpreted to represent the signal of nearshore, westward movement of the cool and nutrient‐rich, upwelled water. Collectively, these data emphasize how local processes such as upwelling and longshore transport can variably influence carbonate sediment accumulations and their geochemical signatures, both along and across individual shelves. These data and insights provide an analogue for the influences of spatial variability of water masses in the geological record, and for accurate interpretation of stratigraphic changes of sedimentary and geochemical proxy data in carbonate archives.     

百色盆地东部兰木组古岩溶储层特征及其主控因素

常规薄片和扫描电镜分析表明,百色盆地上法地区兰木组石灰岩古岩溶储层具低孔渗特点,主要储集空间为后期改造产生的裂缝和溶蚀孔洞;经历了风化壳岩溶和缝洞渗流岩溶两种成因的两期岩溶作用,纵向上分表生岩溶带、渗流岩溶带和潜流岩溶带三个相带。裂缝以构造裂缝为主,以发育开启—半开启的高角度裂缝为主,低角度裂缝次之。有三种储层类型,其中以裂缝—孔洞型的最好,为主力产层,裂缝—孔隙型的次之,孔隙型的最差。影响古岩溶储层空间发育的主控因素为断裂和构造活动、岩石纯度、后期成岩作用的破坏。