利用地质雷达探测青岛港木质高桩码头承台完整性

利用EKKO－100型探地雷达对青岛港木质高桩码头承台完整性进行探测，结合现场钻探、孔内波速测试、岩样分析测试，进一步对码头的工程性状进行了分析和评价。     

青岛浮山野生花卉种质资源

本文简要叙述了青岛浮山野生花卉的种类、生长环境、园林用途及开花结果日期，为把这些野生花生花卉引进城市园林提供科学依据。     

A proposed directional function and wind-wave directional spectrum

Ａｐｒｏｐｏｓｅｄｄｉｒｅｃｔｉｏｎａｌｆｕｎｃｔｉｏｎａｎｄｗｉｎｄ－ｗａｖｅｄｉｒｅｃｔｉｏｎａｌｓｐｅｃｔｒｕｍ￥ＷｅｎＳｈｅｎｇｃｈａｎｇ；ＷｕＫｅｊｉａｎ；ＧｕａｎＣｈａｎｇｌｏｎｇ；ＳｕｎＳｈｉｃａｉａｎｄＺｈａｎｇＤａｃｕｏ（Ｒｅｃｅｉ...     

关于“包装产品的计量标准型一次抽检方案”的确定

本文给出了“包装产品的计量标准型一次抽检方案”,并通过一个实例说明本方案比一般《计量标准型一次抽检方案》更为优越。     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

P矢量方法在南海夏季环流诊断计算中的应用

基于1998年6～7月南海调查航次的CTD资料,对南海环流采用最近发展的P矢量方法进行诊断计算.计算结果:黑潮向西入侵南海,然后做反气旋弯曲向东北方向流动,最终有通过巴士海峡流出南海的趋势.在南海北部存在一个气旋性环流,这个环流的强度和范围随深度增加而减小.该环流的冷中心位置随深度增加稍向南移.南海中部、越南以东海域存在一个明显的气旋涡和反气旋涡,尤其在200m及其以上水层均相当稳定,反气旋涡位于越南以东,其中心位置在11°53'N,111°50'E,气旋涡的中心位置在13°17'N,112°55'E,两者的尺度皆约为250km.吕宋岛西侧存在一个反气旋涡.在计算海区南部、巴拉望岛西南海域,100m以上层存在一个反气旋式涡.从各层流场分布均可以显示海流在西部强化的现象.     

Algorithm for HF radar vector current measurements

A new algorithm is proposed, called the stream function method (SFM) for producing vector current maps from radial data measured by dual-site high frequency surface wave radar (HFSWR). In SFM, a scalar stream function is constructed under some oceanographic assumptions. The function describes the two-dimensional (2-D) ocean surface water motion and is used to obtain the distribution of vector currents. The performance of SFM is evaluated using simulated radial data, which demonstrates that SFM has advantages over typical vectorial combination methods (VCM) both in error acceptance and robustness, and excels another method based on least-squares fitting (LSF) in recovering the complicated current models. Furthermore, SFM is capable of providing the total currents based on radials from single-site radar. We also test the assumptions of horizontal non-divergence in the simulation. The new algorithm is applied to the field experiment data of Wuhan University’s ocean state measuring and analyzing radar (OSMAR), collected in the coastal East China Sea during April 11–17, 2004. Quantitative comparisons are given between radar results by three current algorithms and in-situ current meter measurements. Preliminary analysis of the vertical current shear is given based on the current meter measurements.     

用样条函数计算结果研究冲绳海槽热源机制

对冲绳海槽１９８４－１９９０年的实测热流值，利用数字滤波方法计算，得到反映该区深部地壳热状态的区域热流值为８０－１６０ｍＷ／ｍ＾２，用Ｂ样条函数法对其作数值模拟，计算出海槽地温场模式，并以此研究冲绳海槽海底高热流的形成机制，得出冲绳海槽热流值的区域性变化与綦中地质构造格局呈正相关，高热流是该区现代构造活动所致，其明显特征是地壳减薄，地幔上拱等结论。     

长期非平稳荷载调谐质量减振阻尼器优化设计

研究外荷载为长期非平稳随机过程。考虑长期荷载的特性 ,采用 1个概率谱密度函数来反映长期非平稳随机荷载及其特征 ;概率谱密度函数是基于大量的一般谱密度函数的统计特性获得。以延长结构的抗疲劳使用寿命为目标函数 ,提出了调谐质量减振阻尼器的优化设计方法 ,这在实际工程中有着极为广阔的应用前景。本文旨在从理论上发展长期非平稳随机荷载作用下调谐质量减振阻尼器的优化设计方法 ;文中采用长期波浪实测数据 ,给出了 1个数值算例说明整个设计过程。     

Determination of cadmium(II), copper(II), manganese(II) and nickel(II) species in Antarctic seawater with complexing resins

The strong species of cadmium(II), copper(II), manganese(II) and nickel(II) in an Antarctic seawater sample are investigated by a method based on the sorption of metal ions on complexing resins. The resins compete with the ligands present in the sample to combine with the metal ions. Two resins with different adsorbing strengths were used. Very stable metal complexes were investigated with the strong sorbent Chelex 100 and weaker species with the less strong resin, Amberlite CG-50. Strong species were detected for three of the considered metal ions, but not for Mn(II). Cu(II) is completely linked to species with a side reaction coefficient as high as log α_M(I) = 11.6 at pH = 7.3. The ligand concentration was found to be similar to that of the metal ion, and the conditional stability constant was around 10²⁰ M^− 1. In the considered sample, only a fraction of the metal ions Cd(II) and Ni(II) is bound to the strong ligands, with side reaction coefficients equal to log α_M(I) = 5.5 and 6.5 at pH = 7.3 for Cd(II) and Ni(II), respectively. These findings were confirmed by the test with the weaker sorbent Amberlite CG-50. It can be calculated from the sorption equilibria that neither Mn(II) nor Ni(II) is adsorbed on Amberlite CG-50 under the considered conditions and, in fact, only a negligible fraction of Mn(II) and Ni(II) was adsorbed. A noticeable fraction of Cd(II) was adsorbed on Amberlite CG-50, meaning that cadmium(II) is partially linked to weak ligands, possibly chloride, while no copper(II) was adsorbed on this resin, confirming that copper(II) is only combined in strong species. These results are similar, but not identical, to those obtained for other seawater samples examined in previous investigations.