钢筋混凝土长肢一字形截面柱抗震性能试验研究

对4个1／2缩尺的长肢一字形截面柱构件进行了低周反复荷载下的抗震性能试验研究,构件截面高厚比分别为4．0、4．5与5．0,分别按柱子配筋与按剪力墙配筋两种配筋方式进行设计。通过试验分析了长肢一字形截面柱的承载力、刚度、延性、耗能、滞回特性等,并提出了抗震设计建议。     

劲芯水泥土桩承载路堤渐进式失稳破坏机制

劲芯水泥土桩是一种软土地基处理的新方法,近年来已成功应用于公路、铁路路基处理工程中。然而由于人们对其承载路堤的失稳破坏机制认识不足,无法正确指导设计。采用反映桩体材料破坏后特征的应变软化模型,模拟劲芯水泥土桩承载路堤失稳破坏1g模型试验,通过分析路堤失稳破坏过程中桩体塑性区的开展和桩身受力的变化情况,研究了桩体的破坏顺序及其破坏模式。结果表明：路堤失稳过程中,劲芯水泥土桩并非同时发生破坏,路面正下方桩体首先发生受压破坏,坡面下方桩体自坡脚至坡肩依次发生弯剪破坏;由于桩体的存在,路基中滑动面并非完全穿过桩体破坏位置。基于桩体破坏顺序、破坏模式、受力情况变化,以及荷载传递规律,阐释了劲芯水泥土桩承载路堤渐进式失稳破坏机制。采用现行规范中基于残余强度的柔性桩处理方法,计算的安全系数与试验结果较为接近,但其适用性还需做进一步研究。     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

Experimental and numerical investigations on the intact and damage survivability of a floating–moored oscillating water column device

This paper investigates the intact and damage survivability of a floating–moored Oscillating Water Column (OWC) device using physical model experiments and Computational Fluid Dynamics (CFD) simulations. Different extreme wave conditions have been tested using irregular and regular wave conditions. The device was moored to the tank floor via four vertical taut lines and the effect of the mooring line pre–tension on the device response was studied. It was found that the instantaneous position of the floating device was a key factor in the survivability analysis such that a certain irregular wave train that might not include the largest wave could induce the maximum response. Reducing the pre–tension minimized the maximum surge, but significantly increased the maximum tension due to mooring slack events causing snatch loads. A design regular wave with a period equal to the peak period and a height of 1.9–2.0 times the significant wave height could reasonably predict the same maximum line tension as the irregular sea state, but a smaller wave height was required to achieve the maximum surge. A single failure in the mooring system increased the maximum tension by 1.55 times the intact tension. For a damaged mooring system, using the same design regular wave condition derived from the survivability analysis with an intact mooring system could result in overestimating the maximum tension by more than 20% in comparison to the tension from the irregular sea state, but a smaller regular wave height or a different regular wave condition representing another sea state could lead to the same maximum tension. This highlighted the importance of investigating survival conditions with a damaged mooring system instead of simply using the same conditions derived for the intact mooring system.     

改进型中心管模型能量转换性能试验及样机设计

为了提高中心管振荡水柱波浪能利用技术能量转换效率,基于新的认识和目前常用的2.4米导航灯标,对中心管尾部设计了三种模型并在造波水槽中进行能量转换性能试验。试验结果表明:直管型中心管俘获宽度比最高达到了70.25%,但通频带宽度窄;加长喇叭口型中心管略好于喇叭口型中心管;在喷咀比为0.02条件下,加长喇叭口型中心管浮体有较高双峰俘获宽度比,波峰为40.0%,波谷为31.6%,通频带宽,为随机波下高效转换创造了条件。最高俘获宽度比和双峰通频带特性实验数据结果都优于历史文献值。根据试验数据对一些适合小型海洋仪器供电的样机进行了设计,设计的样机具有较高的性价比。     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

竖向地震动对大跨度高断面Y形柱地铁车站地震响应分析研究

以北京地铁6号线新华大街站公共区Y型柱地铁车站为工程背景,利用FLAC3D有限差分程序数值模拟分析,研究超浅埋大跨度、高断面、Y形柱地铁车站结构分别在仅输入水平向地震动和同时输入水平向与竖向地震动情况下的地震响应特性。结果表明:(1)与仅输入单向地震动相比,双向地震动耦合作用下车站各测点的峰值加速度和应力值均增大,而相对水平位移减小,且随着输入地震动强度的增加,竖向地震动影响率呈递减趋势;(2)双向地震动作用下,同一工况Y形柱叉支处各测点的竖向位移明显增大,且各测点的竖向位移值较为均匀,而单向水平地震动作用下各测点竖向位移差异较大;(3)与单向水平地震动相比,竖向地震动的输入对各测点间的水平方向地震动特性规律影响较小。     

Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology

This research investigates the seismic design method and the cyclic inelastic behavior of the bottom column, also called the vertical boundary element (VBE), in steel plate shear walls (SPSWs). This study consists of two parts. This Part 1 paper discusses the anticipated pushover responses for properly designed SPSWs and the possible inelastic responses of the bottom VBE at various levels of inter‐story drift. Considering both the tension field action of the infill panel and the sway action of the boundary frame, this study develops a simplified method to compute the flexural and shear demands in the bottom VBE. Based on the superposition method, this approach considers various plastic hinge forming locations at different levels of inter‐story drift. One of the key performance‐based design objectives is to ensure that the top ends of the bottom VBEs remain elastic when the SPSWs are subjected to the maximum considered earthquake. This paper presents the comprehensive design procedures for the bottom VBE. Furthermore, this study conducted cyclic performance evaluation tests of three full‐scale two‐story SPSWs at the Taiwan National Center for Research on Earthquake Engineering in 2011 to validate the effectiveness of the proposed design methods. The experimental program, cyclic inelastic responses of the SPSWs and bottom VBEs, and numerical simulations are presented in Part 2. Copyright © 2014 John Wiley & Sons, Ltd.     

Small-strain dynamic characterization of clayey soil from the Texcoco Lake,Mexico

The area occupied by the former Texcoco Lake was part of a system of lakes inside the Basin of Mexico. The subsoil there has been studied in the past but there is still a need for more and more thorough investigations into the dynamic properties of its highly compressible clays. This paper describes the results of an experimental laboratory research in which a triaxial cell fitted with bender elements was used to measure shear wave velocities (V_s) in clay specimens from the former Texcoco Lake. Soil specimens were subjected to isotropic loading–unloading cycles and values of V_s were determined during the saturation stage and after each stress increment or decrement. Our results show that irrespective of the testing method, shear waves velocities differ in no more than 7–15%.     

带防屈曲支撑的钢管混凝土框架抗震性能参数分析

设置防屈曲支撑的钢管混凝土框架是一种新型钢管混凝土减震结构。采用有限元软件Opensees对设置防屈曲支撑的单层单跨钢管混凝土减震框架进行数值模拟,研究了框架梁柱线刚度比、防屈曲支撑初始刚度以及钢管混凝土柱轴压比等设计参数对该减震结构抗震性能的影响。研究结果表明：1数值模拟和试验结果吻合较好,验证了有限元模型的正确性;2梁柱线刚度比在0.1~0.3之间变化时,钢管混凝土减震框架的抗震性能较好;3BRB耗能支撑的初始刚度K1在40~80kN/mm变化时,减震框架的耗能减震效应较明显;4在合理的钢管混凝土柱轴压比范围内,当轴压比较大时,在钢管混凝土框架中设置防屈曲支撑能明显地提高结构的耗能能力和改善结构的强度退化现象。