约束高强度Q460钢柱抗火性能分析

为了研究高强度约束钢柱在火灾下的反应,根据高强度结构钢Q460在高温下的力学性能参数,建立了约束高强度钢柱受火分析模型,得到了高强度约束钢柱在火灾下的轴向位移、跨中挠度、最大应力以及临界温度。采用有限元分析对理论结果进行了验证,两者吻合很好。利用验证过的该文计算方法计算了2种荷栽比、长细比和约束刚度比条件下的高强钢柱的抗火性能;采用CECS200：2006的力学性能参数计算了约束普通钢柱的抗火性能。通过对高强钢和普通钢的抗火性能分析发现,轴向约束明显降低钢柱的临界温度,长细比、荷载比越大,临界温度越低;高强钢的抗火性能要优于普通钢。     

方钢管混凝土柱-钢梁平面框架耐火性能研究

建立了局部火灾下多层多跨矩形钢管混凝土柱-钢梁平面框架温度场和力学性能分析的有限元模型。在考虑楼板影响的基础上,研究了保护层厚度不同时钢管混凝土框架结构的温度场分布规律。研究了不同受火工况条件下钢管混凝土框架结构的变形和破坏规律、耐火极限状态、受火梁的内力状态以及结构耐火极限的规律。分析表明,梁保护层厚度影响钢梁温度分布形式;火灾下,框架结构发生了受火梁的整体屈曲破坏。     

钢纤维增强十字形异形柱中节点的抗震性能试验

针对异形柱节点的薄弱特性,通过在节点处掺加钢纤维,对比了钢纤维增强的异形柱中节点和未掺加钢纤维的普通混凝土异形柱中节点的破坏特征、承载力、延性、滞回性能和刚度退化等抗震性能指标。结果表明:钢纤维增强的异形柱节点试件承载力明显提高,节点核心区破坏程度明显较轻,加载后期,刚度保持效果有明显改善,说明钢纤维可以提高异形柱节点的抗震能力。     

碎石桩处理软土地基临界填筑高度的研究

目前计算碎石桩处理软土地基临界填筑高度的方法并不完善,没有考虑软基经碎石桩处理后复合地基强度的增加和地基排水固结能力的提高,基于此,依据固结理论,引入碎石桩复合地基固结计算的简化方法,修正按变形控制的临界填筑高度计算公式;并结合四川省遂-资高速公路软基变形监测数据,得出软基厚度在6.5～11.0 m范围内,观测所得的临界填筑高度为4.5～6.5 m,该观测值与修正公式计算值差异性不显著,证实所推导的解析式是切实可行的;在此基础上,初步探讨影响路堤临界填筑高度变化的因素,得出软基厚度、桩间距对其影响较为明显。     

Centrifuge modeling of offshore wind foundations under earthquake loading

The construction of large offshore wind turbines in seismic active regions has great demand on the design of foundations. The occurrence of soil liquefaction under seismic motion will affect the stability of the foundations and consequently the operation of the turbines. In this study, a group of earthquake centrifuge tests was performed on wind turbine models with gravity and monopile foundations, respectively, to exam their seismic response. It was found that the seismic behavior of models was quite different in the dry or saturated conditions. Each type of foundation exhibited distinct response to the earthquake loading, especially in the offshore environment. In the supplementary tests, several remediation methods were evaluated in order to mitigate the relatively large lateral displacement of pile foundation (by fixed-end pile and multi-pile foundation) and excessive settlement of gravity foundation (by densification, stone column, and cementation techniques).     

A comprehensive study on the parameters setting in smoothed particle hydrodynamics (SPH) method applied to hydrodynamics problems

Smoothed particle hydrodynamics (SPH) is a meshfree, Lagrangian particle method which has advantages in handling solids with extremely large deformation. Like any other numerical methods, cares must be taken to ensure its desirable accuracy and stability through considering several correction techniques in calculation. The selection of values for parameters in those correction approaches is a key step in SPH simulation, which is always difficult for new beginners to deal well with effectively. This paper examines the common inconsistency and instability problems in SPH method and studies its computational efficiency when applied to hydrodynamics problems with material strength like soil column collapse. We analyzed in detail how the correction techniques mitigate these inconsistency and instability problems. Also, the numerical testing results associate with different values for the parameters used in the correction techniques are provided for better understanding the influence of these parameters and for finding out the desirable values. It is found that (1) the SPH method is easily subjected to an inconsistency problem in the boundary area due to the boundary deficiency, and it can be treated well by adopting “virtual particles” contributing to the particle summations. (2) The numerical oscillation in SPH simulation can be mitigated effectively by artificial viscosity with the suggested parameter values. (3) The tension cracking treatment, artificial viscosity and artificial stress work well in removing the tensile instability problem in SPH method. In addition, the nearest neighboring particle searching (NNPS) algorithm, spacing ratio, smoothing length and time step influence the efficiency and accuracy of SPH method significantly. It is shown that SPH method with suggested parameters values can produce a very good result compared with the experimental result.     

钉形水泥土双向搅拌桩桩身强度差异原因分析与检测探讨

本文简单介绍了钉形水泥土双向搅拌桩的形成及其特点,通过大量的桩身标准贯入试验和室内无侧限抗压强度试验,建立了桩身标准贯入击数与桩身无侧限抗压强度以及桩体分段深度的数学关系式,同时对钉形水泥土双向搅拌桩桩身强度不一致的现象进行了深入分析,对桩身强度检测项目和方法进行了深入探讨,并初步确定了武汉新区桩身强度检测的项目和方法。提出采用加权平均值作为桩身强度设计和检测的标准更为妥当。     

单层带支撑异形柱框架的高温性能研究

针对单层异形柱框架,通过高温数值分析,考察了支撑设置和受火位置对结构高温变形及内力的影响。研究结果表明：对于单层多跨异形柱框架,当只有一端有支撑跨时,会在一定程度上增大另一端的边节点水平位移和边柱侧向变形,对结构整体抗火不利;当左、右两端均有支撑跨时,非支撑跨在火灾作用下的梁轴力比很大,升温后期可能因梁跨中竖向位移急剧增大而发生破坏。基于上述研究结果,给出了4类单层带支撑异形柱框架火灾行为的初步判定方法。     

钢管混凝土叠合边框内藏钢板-钢桁架双肢剪力墙抗震研究

在大连国际会议中心核心筒墙体抗震设计中,采用了一种钢管混凝土叠合边框墙肢内藏钢板、连梁内藏钢桁架的组合双肢剪力墙。为研究其抗震性能,进行了1个1/7缩尺的这种新型组合双肢剪力墙模型的低周反复荷载试验,分析了其承载力、延性、刚度及其退化、滞回特性、耗能能力和破坏特征,重点研究了钢管混凝土叠合边框、墙肢内藏钢板、连梁内藏钢桁架之间的共同工作性能。研究表明:内藏钢板-钢桁架可显著提高钢管混凝土叠合边框双肢剪力墙的承载力和延性性能;钢管混凝土叠合边框可充分发挥其承载力高、不易开裂、延性好的优势。文中提出了该新型组合双肢剪力墙的承载力计算模型,计算结果与实测结果符合较好。     

某异型钢管混凝土拱桥地震反应分析

本文以某异型钢管混凝土拱桥为研究对象,通过ANSYS建立了结构的空间有限元模型,计算和分析了该桥的动力特性。同时,通过MATLAB程序生成拟合规范反应谱的人工地震波,并运用时程分析法计算了该桥在一维和多维输入下的地震反应,分析了该桥的地震反应规律,为钢管混凝土拱桥的抗震性能分析提供了一定的依据。