Flood-formed dunes in Athabasca Valles, Mars: morphology, modeling, and implications

Estimates of discharge for martian outflow channels have spanned orders of magnitude due in part to uncertainties in floodwater height. A methodology of estimating discharge based on bedforms would reduce some of this uncertainty. Such a methodology based on the morphology and granulometry of flood-formed (‘diluvial’) dunes has been developed by Carling (1996b, in: Branson, J., Brown, A.G., Gregory, K.J. (Eds.), Global Continental Changes: The Context of Palaeohydrology. Geological Society Special Publication No. 115, London, UK, 165-179) and applied to Pleistocene flood-formed dunes in Siberia. Transverse periodic dune-like bedforms in Athabasca Valles, Mars, have previously been classified both as flood-formed dunes and as antidunes. Either interpretation is important, as they both imply substantial quantities of water, but each has different hydraulic implications. We undertook photoclinometric measurements of these forms, and compared them with data from flood-formed dunes in Siberia. Our analysis of those data shows their morphology to be more consistent with dunes than antidunes, thus providing the first documentation of flood-formed dunes on Mars. Other reasoning based on context and likely hydraulics also supports the bedforms' classification as dunes. Evidence does not support the dunes being aeolian, although a conclusive determination cannot be made with present data. Given the preponderance of evidence that the features are flood-formed instead of aeolian, we applied Carling's (1996b, in: Branson, J., Brown, A.G., Gregory, K.J. (Eds.), Global Continental Changes: The Context of Palaeohydrology. Geological Society Special Publication No. 115, London, UK, 165-179) dune-flow model to derive the peak discharge of the flood flow that formed them. The resultant estimate is approximately 2×10⁶ m³/s, similar to previous estimates. The size of the Athabascan dunes' in comparison with that of terrestrial dunes suggests that these martian dunes took at least 1-2 days to grow. Their flattened morphology implies that they were formed at high subcritical flow and that the flood flow that formed them receded very quickly.     

A 0.4-2.5 μm spectroscopic investigation of Triton's two faces

We have obtained new observations of Triton with the ESO New Technology Telescope (La Silla, Chile) in October 2002. Using the high quality of NTT instrumentation, we were able to cover the entire 0.4-2.5 μm spectral range in a single night. We applied this procedure for two nights, well selected along the orbit of Triton, in order to cover essentially the trailing side one night, and the leading one the other night, obtaining the first face-resolved 0.4-2.4 μm spectra of Triton. We discuss here the spectra and the differences between the two faces, and the implications of these new results for a better understanding of the surface composition of Triton. In particular we found possible clues for the presence of rocky materials on Triton's surface.     

Shapes and rotational properties of thirty asteroids from photometric data

We have analyzed photometric lightcurves of 30 asteroids, and present here the obtained shapes, rotational periods and pole directions. We also present new photometric observations of five asteroids. The shape models indicate the existence of many features of varying degrees of irregularity. Even large main-belt asteroids display such features, so the resulting poles and periods are more consistent than those obtained by simple ellipsoid-like models. In some cases the new rotational parameters are rather different from those obtained previously, and in a few cases there were no proper previous estimates at all.     

Vesta’s UV lightcurve: hemispheric variationin brightness and spectral reversal

Spectra of asteroid 4 Vesta obtained in October 1990 with the International Ultraviolet Explorer are reanalyzed and reinterpreted. A large portion of the eastern hemisphere (based on the prime meridian definition of Thomas et al., 1997a) is darker at UV wavelengths than much of the western hemisphere. The UV lightcurve is in contrast with the visible lightcurve, which shows that the eastern hemisphere is brighter than the western. These IUE spectra of Vesta thus may be evidence for the “spectral reversal,” first seen on the Moon by Apollo 17, where the visibly brighter lunar highlands are darker than the maria at far-UV wavelengths. This effect was linked to space weathering when it was noted (Wagner et al., 1987) that the spectral reversal appears in the laboratory spectra of lunar soils but not powdered lunar rocks.We investigate Vesta’s UV lightcurve and spectral reversal, and its possible connection with space weathering. The addition to grain coatings of small amounts of submicroscopic iron (SMFe) through vapor deposition causes drastic spectral changes at UV-visible wavelengths (Hapke, 2001), while the longer wavelength spectrum remains largely unaffected. Other laboratory results (e.g., Hiroi and Pieters, 1998) indicate that the UV-visible wavelength range is affected by simulated weathering processes in a manner similar to what is seen on Vesta. It is likely that Vesta has experienced relatively minor amounts of space weathering, as indicated by the spectral reversal, along with the subtle visible-near infrared weathering effects (e.g., Binzel et al., 1997).     

Parametric investigation of lateral spreading of gently sloping liquefied ground

This paper investigates the main parameters affecting the anticipated maximum surface displacements due to earthquake-induced lateral spreading of mildly sloping ground. The main tool used for this purpose is a numerical methodology employing a bounding surface plasticity model implemented in a finite difference code, which has been thoroughly validated against 16 published centrifuge lateral spreading experiments. This study shows that important problem parameters are the mean ground (surface) acceleration, the duration of strong shaking following the onset of liquefaction, the corrected SPT blowcount, the depth to the sliding plane, the inclination of the ground surface and the fines content of the liquefied soil layers. A new approximate multi-variable relation is proposed for the estimation of ground surface displacements due to lateral spreading in gently sloping ground, which includes the foregoing parameters. The form of the relation builds upon sliding block theory, but its final formulation is based on statistical analysis of the input data and the results from 120 parametric analyses performed with the validated numerical methodology. Comparison of the predictions of the proposed relation for ground surface displacement against pertinent field data (from 256 case histories) and centrifuge test measurements shows satisfactory accuracy. Furthermore, the variation of lateral displacements with depth is explored and distinct displacement patterns are proposed for uniform, 2-layer and 4-layer ground profiles.     

Collisions, cosmic radiation and the colors of the Trojan asteroids

The Trojan asteroids orbit about the Lagrangian points of Jupiter and the residence times about their present location are very long for most of them. If these bodies originated in the outer Solar System, they should be mainly composed of water ice, but, in contrast with comets, all the volatiles close to the surface would have been lost long ago. Irrespective of the rotation period, and hence the surface temperature and ice sublimation rate, a dust layer exists always on the surface. We show that the timescale for resurfacing the entire surface of the Trojan asteroids is similar to that of the flattening of the red spectrum of the new dust by solar-proton irradiation. This, if the cut-off radius of the size distribution of the impacting objects is between 1 mm and 1 m and its slope is −3, for the entire size range. Therefore, the surfaces of most Trojan asteroids should be composed mainly of unirradiated dust.     

2010.0年代蒙古地区岩石磁异常

采用2011~2012年期间在蒙古国境内地磁测量得到的119点地磁数据,利用以球冠谐和和曲面样条方法得到的蒙古地区地磁场数值为基础数据,获得了2010.0年代蒙古地区岩石磁异常的空间分布,对蒙古地区岩石磁异常的空间分布进行了研究。结果表明,蒙古地区的岩石磁异常表现出东西差异,异常幅度在西部较大东部较小。蒙古西部南边界处表现为类弧形结构和贝加尔—乌兰巴托条带结构为蒙古地区较为显著的磁异常结构。     

A hydrocode calculation coupled with reaction kinetics of carbon compounds within an impact vapor plume and its implications for cometary impacts on Galilean satellites

The synthesis of organic molecules via chemical reactions within impact vapor plumes has been proposed as a mechanism to supply organics on a planet. However, the kinetics of chemical reactions within a rapidly expanding vapor plume or quenching process of the reactions has not been studied extensively. In this study, we constructed a new numerical model that calculates kinetics of the entire chemical reactions within an impact vapor plume. Numerical results revealed that the semi-analytical models proposed so far, in which the final amount of a chemical species was given by the equilibrium abundance at the quenching temperature of the fastest reaction path involving the species, underestimates the yield of organic molecules, such as HCN, by up to a factor of 10. This is because the previously used assumption that a species can achieve equilibrium with the rest of the reaction system via the fastest reaction path involving the species is not necessarily valid. Our analysis of the high-temperature H/C/N/O reaction system suggests that the quenching of slow reactions divides the reaction network into smaller reaction sub-systems isolated from the rest of the reaction system. Then, the fastest reaction path cannot equilibrate an isolated reaction sub-system with the rest of the reaction system. Simulation of this actual disequilibrium mechanism requires a simultaneous numerical calculation of the entire reaction network, which is equivalent to conducting a full kinetic model calculation, such as our model. Our numerical code makes it possible to discuss quantitatively the impact chemistry for various situations, such as the Galilean satellites. In this study, our numerical model is applied to the delivery of organic molecules via cometary impact on the Galilean satellites. Our numerical results indicate that small-particle impacts would produce HCN efficiently. Resulting HCN may freeze out immediately and be deposited on satellite surfaces, where it may be eventually converted into complex organics via irradiation of charged particle. On the other hand, large-size impacts may form transient CH₄-N₂ atmospheres, in which complex organics (tholin) may be formed via energy deposition of UV and/or charged particle. Resulting complex organics may subsequently precipitate on the satellite surfaces without clear correlation with the locations of impact craters. Such distribution of complex organics created by chemical reactions within vapor plumes due to cometary impacts may explain an absorption (4.57 μm) on Galilean satellites nonassociated with observable (moderate- and large-size) impact craters.     

Scaling forces to asteroid surfaces: The role of cohesion

The scaling of physical forces to the extremely low ambient gravitational acceleration regimes found on the surfaces of small asteroids is performed. Resulting from this, it is found that van der Waals cohesive forces between regolith grains on asteroid surfaces should be a dominant force and compete with particle weights and be greater, in general, than electrostatic and solar radiation pressure forces. Based on this scaling, we interpret previous experiments performed on cohesive powders in the terrestrial environment as being relevant for the understanding of processes on asteroid surfaces. The implications of these terrestrial experiments for interpreting observations of asteroid surfaces and macro-porosity are considered, and yield interpretations that differ from previously assumed processes for these environments. Based on this understanding, we propose a new model for the end state of small, rapidly rotating asteroids which allows them to be comprised of relatively fine regolith grains held together by van der Waals cohesive forces.     

Neutral particle release from Europa’s surface

In this paper, we look at space weathering processes on the icy surface of Jupiter’s moon Europa. The heavy energetic ions of the jovian plasma (H⁺, O⁺, S⁺, C⁺) can erode the surface of Europa via ion sputtering (IS), ejecting up to 1000 H₂O molecules per ion. UV photons impinging the Europa’s surface can also result in neutral atom release via photon-stimulated desorption (PSD) and chemical change (photolysis). In this work, we study the efficiency of the IS and PSD processes for ejecting water molecules, simulating the resulting neutral H₂O density. We also estimate the contribution to the total neutral atom release by the Ion Backscattering (IBS) process. Moreover, we estimate the possibility of detecting the sputtered high energy atoms, in order to distinguish the action of the IS process from other surface release mechanisms. Our main results are: (1) The most significant sputtered-particle flux and the largest contribution to the neutral H₂O density come from the incident S⁺ ions; (2) the H₂O density produced via PSD is lower than that due to sputtering by ∼1.5 orders of magnitude; (3) in the energy range below 1 keV, the IBS can be considered negligible for the production of neutrals, whereas in the higher energy range it becomes the dominant neutral emission mechanism; (4) the total sputtering rate for Europa is 2.0 × 10²⁷ H₂O s⁻¹; and (5) the fraction of escaping H₂O via IS is 22% of the total sputtered population, while the escape fraction for H₂O produced by PSD is 30% of the total PSD population. Since the PSD exosphere is lower than the IS one, the major agent for Europa’s surface total net erosion is IS on both the non-illuminated and illuminated side. Lastly, the exospheric neutral density, estimated from the Galileo electron density measurements appears to be higher than that calculated for H₂O alone; this favors the scenario of the presence of O₂ produced by radiolysis and photolysis.