GPS技术在山区石油地震勘探测量中的应用

针对GPS技术在山区石油地震勘探测量中的工作方式,结合2007年度南盘江一桂中地区二维地震大剖面资料采集应用GPS的工程实例,介绍GPS技术应用的新进展。通过GPS静态测量和应用RTK技术放样物理点,从测前准备、数据处理、精度分析等方面,阐述提高作业精度、有效进行质量控制的方法,旨在最大限度地发挥GPS技术在山区施工中的作用。     

机载激光雷达平均树高提取研究

为了研究机载激光雷达(LiDAR)树高提取技术,以山东省泰安市徂徕山林场为实验区,于2005年5月进行了机载LiDAR数据获取和外业测量.通过对LiDAR点云数据的分类处理,分别得到了试验区的地面点云子集、植被点云子集和高程归一化的植被点云子集.基于高程归一化的植被点云子集计算了上四分位数处的高度,与实地测量的数据进行了比较,并结合中国森林调查规程进行了实用性分析.结果表明:对于较低密度的点云数据,使用分位数法可以较好地进行林分平均高的估计;机载激光雷达技术对树高估计是可行的,精度都高于87%,总体平均精度为90.59%,其中阔叶树的精度高于针叶树.该试验精度可以满足中国二类森林调查规程中平均树高因子的一般商品林和生态公益林的精度要求,对国有商品林小班的调查精度要求(5%)存在一点差距,需要在国有商品林区进一步开展验证工作.对本试验区而言,已经可以满足其作为森林公园生态公益林的调查要求.     

BP神经网络在局部似大地水准面精化的应用

针对高程拟合中的模型误差问题,采用BP神经网络方法进行拟合,可以减小模型误差,提高似大地水准面的精化精度。在焦作市局部似大地水准面精化算例中,BP神经网络高程拟合取得了良好的效果。     

全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

基于退火BP神经网络的GPS高程转换

阐述模拟退火算法的基本思想和原理,提出并介绍模拟退火算法优化的BP神经网络模型在GPS高程转换中的具体应用,同时编写相应的MATLAB处理程序,结合大量数据进行仿真实验,结果表明文中提出的退火BP神经网络模型具有收敛速度快、精度高、避免陷入局部最小的优良特性。     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

三峡水库区兴山后坝滑坡成因分析

文章通过对三峡水库区兴山后坝滑坡的地质、结构及变形特征研究以及稳定性分析,阐明了该滑坡成因和影响因素。研究发现,滑坡活动主要受地形地貌、地层岩性、人类工程活动以及降雨等因素的影响。运用剩余推力法对比分析天然及暴雨条件下不同层位的滑坡稳定性系数,得出在暴雨作用下滑坡表层滑带稳定性系数最小,不同滑带的稳定性受降雨的影响也各不相同,呈表层〉浅层〉深层的规律;这主要受滑带土的粘土矿物组分的影响。     

Using Topological Relationships to Inform a Data Integration Process

When spatial datasets are overlaid, corresponding features do not always coincide. This may be a result of the datasets having differing quality characteristics, being captured at different scales or perhaps being in different projections or datums. Data integration methods have been developed to bring such datasets into alignment. Although these methods attempt to maintain topological relationships within each dataset, spatial relationships between features in different datasets are generally not considered. The preservation of inter‐dataset topology is a research area of considerable current interest. This research addresses the preservation of topology within a data integration process. It describes the functional models established to represent a number of spatial relationships as observation equations. These are used to provide additional information concerning the relative positions of features. Since many topological relationships are best modelled as inequalities, an algorithm is developed to accommodate such relationships. The method, based on least squares with inequalities (LSI), is tested on simulated and real datasets. Results are presented to illustrate the optimal positioning solutions determined using all of the available information. In addition, updated quality parameters are provided at the level of the individual coordinate, enabling communication of local variation in the resultant quality of the integrated datasets.     

附加约束条件的序贯平差

从观测量分组的参数平差出发,详细推导了附加约束条件的序贯平差及其精度估计,讨论了附加约束条件的抗差序贯平差的计算过程.算例表明,推导的公式正确有效,简单实用,附加约束条件的序贯平差抗差估计能有效地抵制粗差的影响.