Discrimination of sedimentary facies by association analysis

The ability of association analysis to discriminate sedimentary facies was tested on Purdy's modal analyses of modern sediments of the Great Bahama Bank. Purdy's data set has served in the past as a standard reference for evaluating various multivariate classification algorithms. In order to adapt Purdy's data to association analysis, the percent abundance of the 12 constituents was converted to binary form by dichotomizing each variable on its mean value. The results obtained by association analysis are virtually identical to those obtained by Purdy and other authors. The same four main sedimentary facies were discriminated; 86% of the samples were identically classified (97% when misclassified borderline cases are counted as matches); the total partition variance of the classification is only negligibly greater (4%); and the grouping of the variables yielded the same four groups. The rank order of the three division-attributes responsible for the sample classification is fines, oolites, and corals. Association analysis has been employed by other authors to differentiate meaningful facies groups in studies of ancient reef carbonates, modern reef sediments, and heavy minerals in stream sediments. In all these studies, the results were found to be compatible with those obtained by using the continuous quantitative measurements, indicating that qualitative binary data may often be sufficient for the purpose of facies discrimination in many branches of geology and that association analysis is an effective method for this purpose.     

Applications of particle-tracking techniques to bank infiltration: a case study from El Paso,Texas, USA

This paper presents results of a small scale study that utilized particle-tracking techniques to evaluate transport of river water through an alluvial aquifer in a bank infiltration testing site in El Paso, Texas, USA. The particle-tracking survey was used to better define filtration parameters. Several simulations were generated to allow visualization of the effects of well placement and pumping rate on flow paths, travel time, the size of the pumping influence zone, and proportion of river-derived water and groundwater mixing in the pumping well. Simulations indicate that migration of river water into the aquifer is generally slow. Most water does not arrive at the well by the end of an 18-day pumping period at 0.54 m³/min pumping rate for a well located 18 m from the river. Forty-four percent of the water pumped from the well was river water. The models provided important information needed to design appropriate sampling schedules for bank filtration practices and ensured meeting adequate soil-retention times. The pumping rate has more effect on river water travel time than the location of the pumping well from the river. The examples presented in this paper indicate that operating the pumping well at a doubled distance from the river increased the time required for the water to travel to the well, but did not greatly change the capture zone.     

Filtration and Clogging Behavior of Geotextiles with Roorkee Soils

Geotextile filters are rapidly replacing graded granular filters as the standard of practice in geotechnical design. The objective of the present study is to predict the behavior of the geotextile filter for the locally (Roorkee—India) available soils using three different geotextiles (two nonwoven and one woven). Nonwoven geotextiles are commonly used in filtration applications. This paper evaluates the long-term performance of two needle-punched nonwoven geotextiles and one woven geotextile. Filtration tests on soil–geotextile filter systems were conducted in the laboratory in order to evaluate the filtration and clogging behavior. Laboratory test program, include evaluation of performance of two different nonwoven and one woven geotextile filters in combination with locally available Solani River Sand and Clayey Soil. The paper describes the concept and details of the Fine Fraction Filtration (F³) test and presents data on three different geotextiles, which were evaluated using three different soil types. It is deduced that in all filtration applications, the non-woven geotextile would perform better than the woven geotextile.     

Evaluation of distributed recharge in an upland semi-arid karst system: the West Bank Mountain Aquifer,Middle East

Assessment of recharge in a structurally complex upland karst limestone aquifer situated in a semi-arid environment is difficult. Resort to surrogate indicators such as measurement of spring outflow and borehole discharge, is a common alternative, and attempts to apply conventional soil moisture deficit analysis may not adequately account for the intermittent spate conditions that arise in such environments. A modelling approach has been made using the West Bank Mountain Aquifer system in the Middle East as a trial. The model uses object oriented software which allows various objects to be switched on and off. Each of the main recharge processes identified in the West Bank is incorporated. The model allows either conventional soil moisture deficit analysis calculations or wetting threshold calculations to be made as appropriate, and accommodates both direct recharge and secondary recharge. Daily time steps enable recharge and runoff routing to be calculated for each node. Model runs have enabled a series of simulations for each of the three aquifer basins in the West Bank and for the whole of the West Bank. These provide recharge estimates comparable to those prepared by earlier workers by conventional means. The model is adaptable and has been successfully used in other environments.     

The S reflector west of Galicia: the seismic signature of a detachment fault

The so-called S reflector is a group of bright, continuous reflections underlying the landward-tilted fault blocks of the west Galicia rifted margin, S has been interpreted as the brittle-ductile transition, the lop of an intrusion, a detachment fault, and the crust-mantle boundary. To constrain the internal structure of the reflector, we have carried out detailed analyses of these reflections. We compare the waveforms of the seafloor reflection and its first multiple, both to determine the amplitude of the seafloor reflection and to show (hat the seafloor is in effect a spike in the reflectivity series so that the seafloor reflection can be used as the far-field wavelet, including both source and receiver ghosts. We compare (he waveform of the seafloor and 5 and show that, within the resolution of our data, S is a reflection from a step increase in acoustic impedance. This result is confirmed through complex trace analysis, and in particular the determination of the apparent polarity of S, and the examination of the instantaneous frequency function: S is consistently positive polarity, and shows no significant frequency anomaly. Simple modelling shows that S is very unlikely to be a reflection from a thin layer. We thus conclude that S is probably a single steplike interface. From the varying frequency content of the data, we determine a value for the effective Q between S and the seafloor, and use this to assess the amplitude loss due to attenuation and scattering. We use a comparison between the seafloor and the S reflection to constrain the amplitude of S, and estimate a reflection coefficient for S of at least 0.2 in places, decreasing landwards. By analogy with structures developed in the highly extended regions of the western United States, we consider that the most likely interpretation of S is as a sharp west-dipping detachment fault separating a 'granitic' upper plate from a higher-velocity lower plate, locally probably serpentinized mantle.     

MTBE in Drinking Water Production – Occurrence and Efficiency of Treatment Technologies

In Germany, the gasoline additive methyl tert‐butyl ether (MTBE) is almost constantly detected in measurable concentrations in surface waters and is not significantly removed during riverbank filtration. The removal of MTBE from water has been the focus of many studies that mostly were performed at high concentration levels and centred in understanding the mechanisms of elimination. In order to assess the performance of conventional and advanced water treatment technologies for MTBE removal in the low concentration range further studies were undertaken. Laboratory experiments included aeration, granulated activated carbon (GAC) adsorption, ozonation and advanced oxidation processes (AOP). The results show that the removal of MTBE by conventional technologies is not easily achieved. MTBE is only removed by aeration at high expense. Ozonation at neutral pH values did not prove to be effective in eliminating MTBE at all. The use of ozone/H₂O₂ (AOP) may lead to a partly elimination of MTBE. However, the ozone/H₂O₂ concentrations required for a complete removal of MTBE from natural waters is much higher than the ozone levels applied nowadays in waterworks. MTBE is only poorly adsorbed on activated carbon, thus GAC filtration is not efficient in eliminating MTBE. A comparison with real‐life data from German waterworks reveals that if MTBE is detected in the raw water it is most often found in the corresponding drinking water as well due to the poor removal efficiency of conventional treatment steps.     

夏季台湾浅滩周边水域悬浮物质浊度和叶绿素a荧光分布特征

2004年7～8月在台湾浅滩周边水域进行了两个断面的水体悬浮物浊度、叶绿素a荧光调查,通过对该区域悬浮物质浊度、叶绿素a荧光的夏季分布变化特征研究,结合水文相关要素分析,初步揭示了区域海洋沉积和再悬浮过程对悬浮体浊度、叶绿素a荧光分布的影响。指出悬浮物质浊度在近岸与陆架外缘主要受再悬浮作用影响,而浅滩区再悬浮作用不明显：在陆架外缘区浮游植物的聚集作用对浊度有一定的贡献作用,而近岸区则不明显。     

A comparison of channel erosion in small urban and rural catchments,Armidale, New South Wales

Five years after the cessation of housing construction in a small urban catchment in Armidale, New South Wales, the stability of the channel bed and banks was investigated with the use of erosion pins. After eighteen months of monitoring, the rate of channel bank erosion was found to be 3.6 times greater than that of a nearby rural channel and the rate of knickpoint retreat was 2.4 times greater. There was, however, no evidence to suggest that the urban channel was inherently unstable, but that the increased rate of erosion was the product of changed runoff conditions associated with urban development. Both channels are considered to be in a state of equilibrium.